Show Posts
|
Pages: [1] 2 3 4 »
|
Does anyone know what happens when the 12 month contract expires? do I get the investment back or I get only the payout generated during the 12 month. Thanks ChiangYay
|
|
|
coin-swap is down I can't log in at cryptsy. Does any one know any other decent exchange where I can unload my XPI? Thanks
|
|
|
I've been trying to withdraw some btc today and the same error message for the last couple of hours: Unable to process transaction at this time Does anyone experience the same issue? Same here
|
|
|
Sell off your Prime and get almost $40 bucks!Today The Zen portal made it possible to sell your Hashlets. For us early adapters we make a nice profit selling hour hashlet prime. Early adaptors profitsAlso today i Made 60% roi on my Primes, and i can sell them for $39.96 We made a list of the rates you get for your hashlets, we think the value will drop fast. Rates:Hashlet Prime $39.96 Hashlet Genesis $7.90 CleverHashlet $13.56 MultiHashlet $12.70 Boost your Hashlets Prime whit 50% for free!I've just boosted my Hashlet Prime 1 Mh/s and now it's running at 1.55 Mh/s. Good reason to login every day and boost them while getting the payouts done anyway. A boost for 30 mins each time once every 12hrs, and only %50 of your hash. Must I sell or keep my Hashlets? Read more here: http://www.bitcoinupdate.nl/home/hashlets-market-opened-his-doors-free-upgrade-for-prime-users I can't find the market place to sell the hashlet and the boost function too in zenportal. Could anyone please tell me how to or give me a link. Thanks
|
|
|
Does any one experiencing the same issue?
|
|
|
No way man but thanks for trying, enjoy the pasta. Sorry guys, my copypasta mistake. Exchange rate JSON key for Bitstamp is not "lowest_ask" - but just "ask", same as the field 1 key. So: Bitstampexchange URL: https://www.bitstamp.net/api/ticker/exhange rate JSON key: ask field 1 JSON key: ask field 2 JSON key: last field 3 JSON key: bid I've wanted to release a new version for weeks now but as I'm in crunch mode with a big project somehow just can't find the time to actually do it.
|
|
|
exchange URL: https://www.bitstamp.net/api/ticker/is not sending data to me, I GET GOX OLD DATA ask 136.3901, last 135, bid 135, USD N/A Anyone have the same problem. It would be nice if Domci could make a downloadable basic gadget version with bitstamp anyway gox is defunct. Thanks in advance. ChiangYay My gadget still shows MtGox price of BTC which is not the real value on the markjet as we all know Could someone let me know how to set coinbase or bitstamp price in the gadget settings ? Im lost and not familiar with API and Json at all Bitstampexchange URL: https://www.bitstamp.net/api/ticker/exhange rate JSON key: lowest_ask field 1 JSON key: ask field 2 JSON key: last field 3 JSON key: bid BTC-Eexchange URL: https://btc-e.com/api/2/btc_usd/tickerexhange rate JSON key: sell field 1 JSON key: sell field 2 JSON key: last field 3 JSON key: buy
|
|
|
Hi,
since yesterday my account page show constantly the same amount of assets:
Balance Unconfirmed Future Expected per block
Bitcoins 0.19372475 ------- 0.1937247 0.02605526
never change, never add anything, seems frozen.
But the live stats page show constant activity.
Any idea?
Does anyone had the same issue?
Thanks and Regards
|
|
|
HELP CGminer load only GPU 0. LTC Mining. I have 3 GPUs but at startup CGminer load only GPU 0, I have to add the other 2 manually. Probably there is some mistake in my CGminer .bat and/or .conf. I folloved the instruction from Con Kolivas and wrote the conf file but something must be wrong. Any help would be appreciated. BAT FILE timeout /t 30 "C:\CGminer\cgminer-3.3.4-windows\cgminer-3.3.4-windows\cgminer.exe" --gpu-platform 0 -d 0 -w 256 -v 1 -I 19 -g 1 -l 1 --thread-concurrency 21712 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 CONF FILE { "pools" : [ { "url" : "stratum+tcp://coinotron.com:3334", "user" : "xxxxxxxxxxx", "pass" : "xxxxx" }, { "url" : " http://stratum.give-me-coins.com:3333", "user" : "xxxxxxxxxx", "pass" : "xxxxxx" } ] , "intensity" : "19,19,19", "vectors" : "1,1,1", "worksize" : "256,256,256", "kernel" : "scrypt,scrypt,scrypt", "lookup-gap" : "0,0,0", "thread-concurrency" : "21712,21712,21712", "shaders" : "1792,1792,1792", "gpu-engine" : "0-0,0-0,0-0", "gpu-fan" : "0-85,0-85,0-85", "gpu-memclock" : "0,0,0", "gpu-memdiff" : "0,0,0", "gpu-powertune" : "0,0,0", "gpu-vddc" : "0.000,0.000,0.000", "temp-cutoff" : "95,95,95", "temp-overheat" : "85,85,85", "temp-target" : "75,75,75", "api-port" : "4028", "expiry" : "120", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "1", "hotplug" : "5", "log" : "1", "no-pool-disable" : true, "queue" : "1", "scan-time" : "30", "scrypt" : true, "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin", "device" : "0" } Software/HARDWARE Catalyst Version 13.4 CGminer 3.3.4 Windows 7 64 bit ASRock 970 Extreme4 MOBO AMD Athlon II Processor 3 x Sapphire Radeon Vapor-X HD 7950 OC with Boost 3 GB Corsair Professional Series 860-Watt 3 x PCI-E riser cable 8 GB DDR3 SDRAM (4 x 4GB) Plastic Crate Thanks. ChiangYay
|
|
|
Hi,
I have 3 GPUs 7950. but GUI miner is running only 1. how to set it to run all the all the 3 GPUs?
Thanks,
ChiangYay
|
|
|
Is there a way to have cgwatcher reboot the computer when the display driver crashes? I sometimes have the driver crash and I can't access the system anymore by remote desktop since there is no desktop anymore (no GPU's = no monitors = no desktop). The system is still running though since I can ping it but there is no way for me to get on it to reboot other than to drive over and flip the switch.
In case CGWatcher will be able to shut down when the driver crash. Or in case of a power outage . You can do as follow: 1) Configure BIOS Settings. Power on your computer, and press the “delete” key a few times immediately after power on. You should end up in the BIOS configuration area. Do the following, then save & exit: Change power options so that the computer automatically turns itself on whenever power is restored. The reason for this is two-fold: first, it’ll make sure that your miner automatically starts up after a power outage. 2) Configure automatic login We want our mining rigs to boot up and start mining without any intervention on our part. We’ll need to enable auto-login for that to happen. Click on the Start Menu and type “netplwiz” (without the quotes) into the search box, and click on it when it appears in the programs list. Uncheck the box that says “Users must enter a user name and password to use this computer”. Click “Apply”. You’ll be prompted to enter your password to confirm the change. 3) Configure cgminer and/or CGWatcher to start automatically We want cgminer to automatically start mining whenever the rig is powered on. That way, we keep mining losses to a minimum whenever a power outage occurs, and we don’t have to worry about manually starting it back up in other situations. In your cgminer folder, right-click on your new mine_litecoins.bat file, and click “Copy”. Now, click on the Start Menu, then right-click on “All Programs”. Finally click on “Open All Users”. Double-click “Programs”, then double-click “Startup”. Right-click anywhere on the empty background of the Startup folder and select “Paste shortcut”. You should see a shortcut to your mine_litecoins.bat batch file appear in the startup folder. Windows should automatically execute it upon bootup. At this point, we’re done with the essentials. If you’ve done everything correctly, you should be able to reboot and watch your rig automatically start mining shortly after the Windows desktop loads. 4) Until CGRemote beta will start configure remote administration Configuring remote administration will allow you to disconnect the monitor, keyboard, and mouse from your mining rig and manage it from another computer over the internet, if you wish. Install VNC like TightVNC or Google Chrome Remote Desktop. Both are lightweight, simple, and free. Hope it helps
|
|
|
ra2gdq9PP6GiG2xgzDPXtBpurMJ9wzBNmV
|
|
|
Right, but in a non merged environment I suppose I could mine more NMC. May be I'm wrong.
Thanks
|
|
|
Hi, does anyone know if exist a pure Namecoin pool, non merged.
Thanks ChiangYay
|
|
|
ra2gdq9PP6GiG2xgzDPXtBpurMJ9wzBNmV
|
|
|
bootinst doesnt work. Keep asking to insert a disk into drive \Device\Harddisk2\DR2. What does it mean?
|
|
|
I suspect rpietila could be Mads Brügger. " Mads Brügger (1972) is a Danish journalist, TV-host, author and filmmaker. He has written several books, worked for magazines and newspapers, produced award winning radio programmes and hosted the critically acclaimed late night TV-programme The 11th hour as well as the daily news/debate programme Deadline. Furthermore, he has created satirical docu-series as Danes for Bush (2004) and the feature-length documentary, The Red Chapel (winner at Nordisk Panorama 2009 & Sundance 2010). Brügger is reknown for his distinctive methods of “performative journalism” as he infiltrates various milieus." http://theambassador.dk/Goat be careful if he wants to film you transfering the BTC's in public.
|
|
|
Hi,
I ordered 4 sigle BFL Asic but nobody know if and when will be shipped.
So I decided to build a rig for mining litecoin, a case with:
#1 MSI 990FXA-GD80V2 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard
#3 Sapphire Radeon Vapor-X HD 7970 GHz OC 3GB DDR5 DL-DVI-I/SL-DVI-D/HDMI/DP PCI-Express Graphics Card
I suppose i need #2 dummy plug. Probably I need 1 Extender Cable w/ Molex but I don't know which one. It seems one extender is needed because the GPU is quite large. Could anyone suggest me if and which one should I order.
Any help and suggestion or critic regarding my configuration would be greatly appreciated.
Thanks,
ChiangYay
|
|
|
Thanks a lot to everybody. Now it works. Great community!
|
|
|
cgminer-2.11.3-win32
fpgaonly
not working.
2.10.5 works perfectly.
Any help would be appreciated.
Try NOT ignoring the big fat warning at startup that says you need to install a new driver? Thanks. But the warning/message run so fast I can read it and dont know how to pause it. Where can I get the new driver? I'm running BFL FGPA Single.
|
|
|
|