 Show Posts
|
|
Pages: [1] 2 »
|
I have only one address which I imported from blockchain. No I don't receive any transactions from faucets or mining pools
So you have Electrum wallet with only one private key which you import from blockchain.com wallet, which means you do not have seed words, is that correct? But since you use that wallet for one year you made some transaction or not? Something is obviously wrong with that specific wallet, and since you can not fix it in any usual way, only thing which would be advisable to do now is clean installation of Electrum. But for that you need to have seed or backup of every private key from your wallet for make full recovery of your funds. You can see private key of any address from your wallet by click on Address tab - then right click on address - you get private key - copy/paste. Yes I have only one private key which I already have it saved on a txt on my computer. I tried to uninstall electurm , removed It's whole folder which is located on appdata folder , installed it again and imported my wallet private key but still having the same issue. |
|
|
|
My Electrum wallet is showing the message
SDL Error
Error:dlopen failed:Library
"libpython3.7m.so.1.0"not found
What does it mean and what can I do about it.
I tried installing my Electrum wallet in my laptop and it is not getting connected
Please create your own thread. Why posting on my thread? |
|
|
|
How many addresses in your wallet? Do you frequently receive a lot of transactions to the same address like from faucets or mining pool payouts?
I have only one address which I imported from blockchain. No I don't receive any transactions from faucets or mining pools |
|
|
|
~
Try going to the %appdata%/Electrum folder, deleting the blockchain_headers file, opening Electrum again and waiting a few minutes for it to synchronize. I have tried to do so but It didn't work. Thanks |
|
|
|
What operating system are you using?
What version of electrum is it also? Do you have a firewall enabled, can you try disabling it?
Is your WiFi censored also?
Try turning off auto connect and select a specific node to connect to.
OS: Windows 10 Electrum version: I was using 3.1.2 and I have upgraded to 3.3.2 after facing this problem but still getting it. I have disabled firewall & windows defender but nothing changed. Wifi isn't censored. I have turned off auto connect and connected to specific node but and It say Synchronizing however files size on "wallet" folder won't increase. Thanks. |
|
|
|
|
Hello,
I have been using Electrum for like a year or something and It's working fine. Since a week It will keep switching between servers and won't connect to any. That happen when I use my old wallet, when I try to create a new one It work just fine and get connected to server.
So, what do you guys think the problem here?
Any help would be appreciated.
Thanks in advance.
|
|
|
|
Hello, My rig restarted when mining lyra2rev2 with CryptoDredge through Awesomeminer and I got this error on event viewer, Faulting application name: CryptoDredge.exe, version: 0.0.0.0, time stamp: 0x5b38d8df
Faulting module name: CryptoDredge.exe, version: 0.0.0.0, time stamp: 0x5b38d8df
Exception code: 0xc0000005
Fault offset: 0x00000000000c9a21
Faulting process ID: 0x1df4
Faulting application start time: 0x01d41624adfaf1cf
Faulting application path: C:\Users\blah\AppData\Local\AwesomeMiner\cryptodredge_0.6.0_1\CryptoDredge.exe
Faulting module path: C:\Users\blah\AppData\Local\AwesomeMiner\cryptodredge_0.6.0_1\CryptoDredge.exe
Report ID: 2ab02e86-3361-4dd6-bb72-cb962981fd41
Faulting package full name:
Faulting package-relative application ID:
|
|
|
|
|
Any news regarding the new release?
|
|
|
|
|
Hello guys,
I'm wondering what's the best miner for lyra2z algorithm when mining with 1080ti?
OS: windows 10
Regards.
|
|
|
|
I have just changed Power limit to %65 and core to 84 Seems KlausT mod doesn't support lyra2z algorithm because ccminer close when I try to mine it. Let's see how it goes. Sorry, I mixed up the algorithms.Klaus mod does not support Lyra2z. Try coolMiner. https://bitcointalk.org/index.php?topic=4412370Thanks for your recommendation, coolMiner makes my gpu usage kinda stable than ccminer. Seems it only support lyra2z because It doesn't work with any other algorithms. Any other good miner software can be recommended which will work with other algorithms because I'm using Awesome miner? |
|
|
|
|
Hello ,
So, I need to add coolminer to Awesome miner to mine lyra2z. Is that possible?
Regards.
|
|
|
|
I think that is why you are having an error after few minutes its because your miner is getting more hotter.
Are you using Afterburner? Try to change the temp limit on afterburner to 65 degrees.
Hotter temp on GPU could leads to temperature protection so this is might be the reason why your miner stop after few minutes.
I'm keeping my GPUs under 55 degrees. Here is my MSI Afterburner settings: Power limit: %60 Core: 160 Memory Clock: -300 Thanks. The power limit which was set in MSI afterburner doesnt really work with MSI 1080 ti Gaming X. I have couple of this gpu (and msi 1070 seahawk), maybe you could try to do several tests like reduce further power limit, but I think the problem may relate to intensity. What's your intensity setting. And dont lower too much your mem clock. I have set it at %65. Also I have set the core clock at 84, hopefully it work. The intensity is 16. I tried to lower it to 1 but ccminer ignored it and set to 16. |
|
|
|
I have just changed Power limit to %65 and core to 84 Seems KlausT mod doesn't support lyra2z algorithm because ccminer close when I try to mine it. Let's see how it goes. |
|
|
|
I think that is why you are having an error after few minutes its because your miner is getting more hotter.
Are you using Afterburner? Try to change the temp limit on afterburner to 65 degrees.
Hotter temp on GPU could leads to temperature protection so this is might be the reason why your miner stop after few minutes.
I'm keeping my GPUs under 55 degrees. Here is my MSI Afterburner settings: Power limit: %60 Core: 160 Memory Clock: -300 Thanks. |
|
|
|
Hello guys, So, I'm mining lyra2z with ccminer through Awesome miner and my GPU usage meter looks like this: https://gyazo.com/e7384f2bb7f972dce2661e4e3933801cIs this normal? After 15 - 30 minutes I got a flood message which say "unspecified launch failure" Here is my setup: GPU : 6x MSI 1080 ti Gaming X MOBO : MSI Z170A Gaming M7 RAM : 1x 8GB CPU : Intel Core i3-7100 SSD : 120 GB PSU : 2x Corsair 1000W + 1x Corsair 1200W OS : Windows 10 Pro What do you think would be the issue here? Any help would be appreciated. |
|
|
|
|
Hello,
I'm unable to start the program and getting failed to start miner process message.
And here is the Diagnostics output below,
Starting Diagnostics. Awesome Miner version: 4.5
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: CcMiner, Auto Download: False, EnginePath: C:\Users\Revix\AppData\Local\AwesomeMiner\ccminer-x64-2.2.3-cuda9, Subtype: Disabled, CustomExecutable:
Added rule for: C:\Users\Revix\AppData\Local\AwesomeMiner\ccminer-x64-2.2.3-cuda9
C:\Users\Revix\AppData\Local\AwesomeMiner\ccminer-x64-2.2.3-cuda9 -a tribus -o stratum+tcp://mine.zergpool.com:8533 -u 12Dk2RFrERz7wUYFgJ1eFpETopRF1yxAnm -p c=BTC -b 0.0.0.0:4028 (WindowMode: ConsoleFormat, EngineType: CcMiner, IsProfitMiner: True)
Configuration:
Failed to start miner process: Access is denied
Failed to start miner in Diagnostics mode
Diagnostics completed
Any help would be appreciated.
|
|
|
|
|
Hello,
Could you accelerate those two transactions for me?
e978e07f3763d7e161381ce844134e98edcba07721efb13ff8101101b384bbd2
b2f34e0bd171ed7c27b7b104666fb0ba84d456e2054731b8e375faf957cf5572
Thanks in advance.
|
|
|
|
|
Hello,
Is there a website or something (which is totally free) which let me add an address/transaction to it and notify me whenever changes happens? like getting new transaction and confirmations?
Thanks in advance.
|
|
|
|
|
Thanks a lot jackg & Thekool1s for your help really appreciated : )
|
|
|
|
|
