Thanks, however I have done it that way, just not using sudo because my system is root. I will try it though.

###UPDATE## That did it!! Thanks , truly awesome!

Recently switch my AM to Linux interface , it's great!
How can I get OhGodAnETHlargementPill to run at launch with my template, I can manually run it of course and it works fine, but can't figure out how to launch it along with all the rigs templates.
Any help please? Thanks

I would still like to get help getting this to work, for native overclock. I f I get get some support that would be great , I would like to be able to use it thanks.

I was saying that I fixed drivers in my linux build but if I can load hive and rename conf that that is much easier , I can deal with the rest of the control problems, it's just the loading drivers and stuff that takes forever. I have a lot of rigs so loading hive and using AM is best, thanks!

BTW I did fix my install and still can't see the the gpus.

I do use HiveOS on some of my rigs and control them through AM , but I did not know if it would still work if it was not "online" through Hive dash. So this works?

Nevermind my post above, just saw my install is broken, even though it mines ok, will fix this first and recheck.

Hey guys I have used AM for a long time via windows system , I am slowly converting the farm to Linux, I just did a build and can mine just fine but I cannot control clocks ( wanting to use native mode )
when I try to change them I get the "could'get information......" message.
Can anyone make some suggestions for getting this to work please??
BTW I loaded a separate AM controller on another network with adding just this one rig so as not to mess up any of my other rigs which are controlled via afterburner.

Thanks for the replies gents I figured as much it being Win7 related. And yes I have tried the other miners and same results. So it's a matter of , do I want to upgrade them to Win10 ( a lot of machines ) or do I go with a Linux based mining OS ...ughhh either way will be a pain since I have used awesomeminer for quite some time for management. YEah the profile pic , LOL right!

I think what I will do is convert 1 machine to Win10 and confirm a fix just to know and report here. As far as performance with other algos I have not ran across any other than MTP with lower performance on Win7 vs 10 but I imagine it is inevitable that I would eventually, let you know

Hey there I have hashrate issues when using MTP on Win7 even with the correct Cuda vs driver per instructions. I have tried it many different ways , uninstall reinstall several different machines in the farm. Is this just a Win7 thing? The Win10 machines seems fine for the most part. Any recommendations?  The hashrate for 1080ti is abou 2MH I can play with clocks and get them a little higher, but would love to get this to work on all my machines, thanks and great job already

When using webchain pool, is there a way to set a username to identify miners in the config of the mining software ?

Hey Loli, nice Work!!
Can you tell me which Equihash/Optiminer software this miner is based on?

I'm trying to enable stats in my dashboard, I use awesomeminer in Windows, it has the ability to add custom algos but will be easier if I can tell it which predefined software it's based on....or I can tell it which command line or api ports your software uses, ThankYou!!

Anyone experiencing connection issues to http://eu.minexpool.nl I'm getting a lot of failed to connect messages. Even within same machine with multiple gpus using separate instance per gpu. 1 or 2 connect and then the other(s) won't. Is this the way the dev mining presents itself?

In Windows search box type regedit and hit enter
Go to:

HKEY_CURRENT_USER\Software\Microsoft\Windows\Windows Error Reporting
right click on "DontShowUI"
click Modify
change the 0 to 1 and save

ENJOY!

Helped even things out across 3 gpus, but they are smaller gpus, 1050+ 2x 980's. And hash was still less than havy Anydesk connected.

Did not help on 1080ti's made things worse.

I have played with a ton of settings, I really cannot figure what it is that Anydesk would be invoking that would cause this.

I even added the exe file to my Nvidia control panel as a controlled program with maximum performance settings.

I'll keep at it but I'll try any other suggestions out there.... I run multiple rigs and it is not feasible for me to keep an anydesk window open for each, however the difference in hashrate makes it significant

So any thoughts on why using Anydesk or Teamviewer might increase hashrate significantly???

Evidently others in different coin threads and miners have noticed this too , however I am using Nvidia , this particular topic is about AMD

https://bitcointalk.org/index.php?topic=2256917.400

I too have a VERY strange observation:

If I am logged in to my miners via Anydesk my hashrate is much higher than if I am not!!

LOL, wtf is that about, anyone already figure this out, I remembered seeing some mentions of Teamviewer earlier in the threads?

Anyhow 14k vs 20k on a 1080ti ........just wild

Also some crashing still on a few machines, running a restart script now to help but.....ehh

Have to email for the hotfix, I will run updates, these PC's that are doing this are just miner bases so very few updates have been done, seems to be more of an issue with rigs that have 1080ti's. I'll run updates and see if that works ( probably 2 hours before I let you know LOL )

Also, any command to pick up devices automatically? What I mean is some rigs have 2 gpus and some have 3, I run a miner controller software that runs as a network command, seems to have a problem if I -d 0,1,2 and there are actually only 2 devices. Not a big deal was just wondering, I can always make separate templates for rigs w/2 vs rigs w/ 3
 Thanks and Nice work!!

Oh...another very strange thing...when miner is launched through controller on 1080ti rigs I lose almost 25% of my hashrate, so weird...I have tried different settings from within the controller dashboard and it strangely does not affect gpus other than 1080ti...

I believe I found the solution, so far so good:

Cannot run MSI Afterburner and must run a separate instance for each device ( -d 0 for one batch -d 1 for next gpu etc...)

Please advise if there is another or better way to run without crash. I would like to run all cards as a single batch.


EDIT: I spoke too soon still got a crash....please help?