BIG Problem with last mining software definition GMiner 1.72
Wrong permision in ZIP archive. Zip file with GMiner 1.72 cant be unarchived & started and i cant as Administrator delete zip file with GMiner 1.72

I am on AM ver. 7.1.2, this was first mining software definition update in this version, maybe in ver. 7.1.2 problem.

And how i can now delete this .zip file if i have not priveleges? Windows show me message that the zip file is opened in AwesomeMiner. ??
This problem on all my miners which have downloaded the latest GMiner1.72 archive.

SOLVED: This problem was due not completed download of archive. To many people at the same time downloading GMiner1.72
Maybe you can add new status to miner process "Downloading" like Starting, Mining, Stoped...

@patrike

@trucobit Thanks for advice, i am seldom use Mining Dutch and mostly mine on NiceHash (when i sleep) or coins directly. But i want know and configure my AM to 100%
AM is best instrument, where i have all needed information on one place, but what to mine i always decide self, after i investigate market for coin. AM give me only advice and direction what must i check.
I am steady on filling my AM with coin/pool/exchange data. Overclocking and profit profiles. This is big job...
You are right with Ferrari with 80 KM/h )))

one other small bug what i found:
Pofit miner running, at this moment i change GPU Overclocking Profile in Miner Profit Profile, some time later,  if miner crashed, new settings  will not be read from Profit Profile. New settings will be read only if user explicit stop&start miner. Look into this pls.

Hi boss, one suggestion:
pls add some button/selectBox to OnlineService tab, where user can quick switch between Statistics method calculation (24 actual, estimated, current, etc) with and without affecting the miners. You have place for this on the window bottom. Maybe its a good idea to show additional columns with another calculation method, to made comparation easy.Regards

hi boss
can you made longer selectBoxes elements for start&stop GPU Clocking Profile in Profit Profile Properties dialog. Names of GPU clocking profiles need more place.
Thx

Hi boss
cant understand how to configure Mining Dutch pool balance for Balance Tab. What must i put, API key, pool username. UserID? Any BTC address i cant find on pool side

Regards

@patrike
nlpool is activated in profit profile override section, but will not be showed in benchmark dialog in "custom pool" list
same if nlpool activated in main Profit switcher settings.

Regards

C:/Users/USERNAME/AppData/Local/AwesomeMiner

@patrike
can you add as functionality in rule section something like calendar where user can compare date and time
this can be very helpfull for users who use solar power for mining. Then user can define at what date/time start and stop farm, over full year, while sun go up and down at different time during the year. And calendar or date compare feature can be used in scenario when power cost will be changed during the different date/time periode.
Regards

@GoRdiE thx for idea, looks like this can work. And first i will try override pool settings on "miner" level instead to create new profile for each miner
Man, man, man, so many many settings in AM !!! I am use program since 3 years and dont know all settings)))

@patrike Than you can, improve "Bulk Edit" function for "profit miners" object and add "override pool settings"

upd: @GoRdiE, override pool settings on "Profit profile " level is better. I can add more pools for profit switching, on miner level, you cant add user defined pools to profit switching.

Hi boss
thanks for quick reaction in Efficiency display improvements. Maybe in next release you add more accuracy for this parameter for other algos too.
 Next small bug what i found is in Benchmark workaround:
If in Option-> Profit Switching checkbox "Make predefined pools everywhere" set to "true" all pools MUST be accessible from Benchmark dialog (if used option: "Use custom pool") But custom pools will be accessible only if user explicit  set checkboxes in "Profit switching" or put pools in in additional pools for profit switching area. Where is logic then in functionality of "Make predefined pools everywhere" setting?

If user have more then one mining farm under control of AM and need benchmark one of his farm, this situation of inaccessibility of all pools made benchmark more difficult. User must stop automatic switching for all miners. Concrete scenario: For Automatic switching selected only Nicehash pool, but if user want test all pools/algos he must include all others pools in switching list, but then other miners will be affected too.

Hope you understand, regards. )))

Hi boss
Accuracy of only two digits after comma is not enough. I speak about  mining Efficiency in Information tab.
If only two digits will be displayed, than impossible to use this information for adjustment algos like Cuckatoo31. Always Efficiency is 0.01 H/W
Add more accuracy pls.
Regards

Yes, good to know calculated hashrate middle value during the test phase. Good Benchmark is very important for mining. Maybe you can add possibility to change overclocking during test.

Hi boss
can you improve benchmark functionality and add a view of actual middle value for actual tested algo.
this is very helpful if user benchmark random algos like x16rv2, x21s, etc
If i want benchmark those algos, i need to run benchmark for 24 hours if i want precise value, but if i see that the counter no more grow, i can stop benchmark and write value in profile.

Regards

hmm, not really understand what your mean with [MinerWorker] variable. Where i can set this variable, in which dialog? Is this some code expression?

thx

Suggestions:
1) please add a functionality to export/import profit profile data as .csv or exel data sheet.
2) many pools allow setting up a worker name only in password field, please add possibility to add worker name in password field.

Regards

same problem with other algos if i try to benchmark NBMiner

looks like some database problem with object indexing.

Hi boss
dont understand why i cant benchmark NBMiner ver. 26 with AM (v7.0.7) benchmark tool ?

if i run managed miner with pool parameters, all is ok. But if i start benchmark with benchmark dialog, miner exit with error:

[15:17:03] INFO - ----------------------------------------------
[15:17:03] INFO - |                  NBMiner                   |
[15:17:03] INFO - |              Crypto GPU Miner              |
[15:17:03] INFO - |                    26.0                    |
[15:17:03] INFO - ----------------------------------------------
[15:17:03] INFO - ALGO:       cuckaroo_swap
[15:17:03] INFO - URL:        ethproxy+tcp://europe.ethash-hub.miningpoolhub.com:17020
[15:17:03] INFO - USER:       bekman.1080TI:x
[15:17:03] INFO - TEMP-LIMIT: 90C
[15:17:05] INFO - ============= Device Information =============
[15:17:05] INFO - * ID 0: GeForce GTX 1080 Ti 9326 MB
[15:17:05] INFO - * ID 1: GeForce GTX 1080 Ti 9326 MB
[15:17:05] INFO - * ID 2: GeForce GTX 1080 Ti 9326 MB
[15:17:05] INFO - * ID 3: GeForce GTX 1080 Ti 9326 MB
[15:17:05] INFO - * ID 4: GeForce GTX 1080 Ti 9326 MB
[15:17:05] INFO - * ID 5: GeForce GTX 1080 Ti 9327 MB
[15:17:05] INFO - ==============================================
[15:17:05] INFO - NVML initialized.
[15:17:05] ERROR - Error format URL: ethproxy+tcp://europe.ethash-hub.miningpoolhub.com:17020
[15:17:05] ERROR - Accepted URL format in regular expression: ^(stratum|nicehash)\+(tcp|ssl)\://[^\:]+:[0-9]{1,5}$


I see, that the AM benchmark tool delegate wrong pool parameters to the miner, I wonna test SWAP on herominers.com pool, but why i see some other wrong pool in log file?

AW not show RPM for RTX2080 TI cards. Tested on Palit and ASUS

Hi @patrike

Can you add a button to a GPU miner object like a "Ignore overclocking settings from profit profile"
That will be a very helpful if some GPU work wrong and must be maintained.
If i can central switch off a settings for a miner, I no need to change overclocking settings for each algo in profit profile.

Regards