Thank you for the fast response. Interesting! I will try again with a keyboard and monitor directly attached to the Raspberry Pi.

I also found out I can find Armory and Electrum directly with apt-get. When I do that, Armory installs correctly..... Although it then installs version 0.92 instead of the latest 0.93.

$ sudo apt-get install armory
(and $ sudo apt-get install electrum)

Thank you for the help

Dear AussieHash,

Unfortunately, your script did not help me. I installed a fresh Raspbian Jessie on an 8 GB SD card. I enabled SSH and tightVNCserver to access my Pi via my network (no keyboard/monitor attached). Might that be the problem??

Then I ran your script. First I selected option 1 (upgrade/update), then option 5 (Armory). The script resulted in errors and Armory was NOT installed. There is no '/usr/lib/armory' folder. Here is the response I get in the terminal. To shorten it, I skip text with writing ".., .., ..".

TERMINAL RESPONSE: ==================================================================================================

Enter selection: 1

..
..
..

Enter selection: 5

Installing armory Raspberry Pi bundle
--2016-01-23 22:02:11--
Resolving s3.amazonaws.com (s3.amazonaws.com)... 54.231.17.248
Connecting to s3.amazonaws.com (s3.amazonaws.com)|54.231.17.248|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 22970522 (22M) [application/x-tar]
Saving to: ‘armory_0.93.3_rpi_bundle.tar.gz’

armory_0.93.3_rpi_bundle.tar.g 100%[====================================================>]  21.91M   639KB/s   in 25s   

2016-01-23 22:02:37 (883 KB/s) - 'armory_0.93.3_rpi_bundle.tar.gz' saved [22970522/22970522]

..
..
..

Untar.gz
Executing: "gksudo dpkg -i *.deb"
Client is not authorized to connect to Server
(gksudo:10134): Gtk-WARNING **: cannot open display: :2.0
Executing: "gksudo "tar -zxf armory_0.93.3_raspbian-armhf.tar.gz -C /""
Client is not authorized to connect to Server
(gksudo:10136): Gtk-WARNING **: cannot open display: :2.0
Traceback (most recent call last):
  File "Install_DblClick_RunInTerminal.py", line 33, in <module>
    open(deskfile,'w').write("""
IOError: [Errno 2] No such file or directory: '/root/Desktop/armory.desktop'
Reading package lists... Done

..
..
..

Correcting privileges for ODROID C1/ubuntu 14.04
chmod: cannot access '/usr/lib/armory/qt4reactor.py': No such file or directory

Press Enter to continue

Dear all

Thank you for your helpful suggestions and comments. I am currently working on it, I will let you know.

I just ran the script from AussieHash on a fresh install of Raspbian Jessie (the raspbian versions since November 2015). But either I don't know what to do afterwards, or something went wrong, because I DO NOT see Armory in my software list........ I do see Electrum though

I will be back with more info on my progress soon

Dear all, I have tried to install Armory on my Raspberry pi to keep it as an offline wallet but I have not succeeded and I am in need of help. I am new to bitcoins and would rate myself a "beginner" linux user. So the question is simple: how do I get Armory to run on my Raspberry pi 2 running Raspbian, from SCRATCH?

This is what i did, summarized in 10 steps:

1. I downloaded the tar.gz file (armory_0.93.2_raspbian-armhf.tar.gz). And I unpacked it.
2. I unpacked the contents to their correct paths (/usr/bin, /usr/lib/ usr/share).
3. Ah, I saw it already has a binary, i thought: "nice". So I go to /usr/bin, and run execute it: $ ./armory
4. This gives a python error: the package "PSUtil" is missing.
5. So i installed it first running $ sudo apt-get install build-essential python-dev python-pip, then: $ sudo pip install psutil, then i checked it: $ sudo python -c "import psutil". This gave no warnings or errors.
6. I retried to run it, then I get this new error message:

pi@raspberrypi /usr/bin $ ./armory
(ERROR) ArmoryUtils.py:1174 - Error getting system details:
Traceback (most recent call last):
  File "/usr/lib/armory/armoryengine/ArmoryUtils.py", line 1172, in <module>
    SystemSpecs = GetSystemDetails()
  File "/usr/lib/armory/armoryengine/ArmoryUtils.py", line 1167, in GetSystemDetails
    out.HddAvailB = getHddSize(BTC_HOME_DIR)    / (1024**3)
  File "/usr/lib/armory/armoryengine/ArmoryUtils.py", line 1164, in getHddSize
    s = os.statvfs(adir)
OSError: [Errno 2] No such file or directory: '/home/pi/.bitcoin/'
(ERROR) ArmoryUtils.py:1175 - Skipping.
(ERROR) Traceback (most recent call last):
  File "/usr/lib/armory/ArmoryQt.py", line 7140, in <module>
    import qt4reactor
ImportError: No module named qt4reactor

Traceback (most recent call last):
  File "/usr/lib/armory/ArmoryQt.py", line 7140, in <module>
    import qt4reactor
ImportError: No module named qt4reactor

7. When I execute it as sudo, I get a shorter and different error log:

pi@raspberrypi /usr/bin $ sudo ./armory
(ERROR) ArmoryUtils.py:1174 - Error getting system details:
Traceback (most recent call last):
  File "/usr/lib/armory/armoryengine/ArmoryUtils.py", line 1172, in <module>
    SystemSpecs = GetSystemDetails()
  File "/usr/lib/armory/armoryengine/ArmoryUtils.py", line 1167, in GetSystemDetails
    out.HddAvailB = getHddSize(BTC_HOME_DIR)    / (1024**3)
  File "/usr/lib/armory/armoryengine/ArmoryUtils.py", line 1164, in getHddSize
    s = os.statvfs(adir)
OSError: [Errno 2] No such file or directory: '/root/.bitcoin/'
(ERROR) ArmoryUtils.py:1175 - Skipping.
Client is not authorized to connect to ServerArmoryQt.py: cannot connect to X server :2

8. I am now stuck, there is already a qt4reactor.py in /usr/lib/armory/. Just to try, I also manually installed ALL the dependencies:

G++: sudo apt-get install g++: done (already on it)
Crypto++: sudo apt-get install libcrypto++-dev: done
SWIG: sudo apt-get install swig: done
Python: sudo apt-get install python-dev: done (needed to run sudo apt-get update first!)
Python Twisted: sudo apt-get install python-twisted: done
PyQt4:
sudo apt-get install libqtcore4: done (already on it)
sudo apt-get install libqt4-dev: done
sudo apt-get install python-qt4: done
sudo apt-get install pyqt4-dev-tools: done

9. This didnt change anything since I am not building from source i guess? But i gave it a try anyways.

10. So, am I on the right track here? Any solutions? There is little help on the website for people like me, and its a bit odd i run into problems like this?.....

Thank you so much for all the help.