Thanks for tip, Yacminer compiled fine. But seems like it requires another setting, these  below are giving only rejects and worked on cgminer-3.7.2 sjane.  I have r9 270 gigabyte.

Too slow to download cryptoslax from main website. Getting 20 - 50 kb/s. Nice to see some mega.cz uploads alternative or the best is to have torrent file.

Does someone got cgminer scrypt-jane compiled for 64 bit linux ?
I tried, but got these error

Full configure and make log http://pastebin.com/TrTyVmjA

Could someone please share working ultracoin-gt for Ubuntu ?
Downloaded one from start post, but when launching
Already intsalled
Anyway produce same error.

BTC на приват24 не меняете ? Выбираю иконки валют, а сумма не вводится. Даже после регистрации не меняется.

My coplex scrypt based on above + added some more features https://bitcointalk.org/index.php?topic=508355.new#new

Yes, sure I need it! But i have non-x 270, anyway it should be approx. the same. BTW my stat shows when mining on leetpool http://simplest-image-hosting.net/png-0-uuuuuuuuuuuu31122-1920x1080-scrot
I'm in doubt regarding  stale share, think it bit more than normal. Pool website showing around 150  kHs mining speed (2x270).
Setting

Thanks, but not accepting so high TC(42000), reduced to 24000.
My settings on BAMT 1.3 as follows. At it giving 85-90 khash on 270 gigabyte.

And for R9 270 good config, please 

Leetpool, what happened to you ?  Not accessible for hour

Guys, help please with cgminer config for ultra. R9 270 Gigabyte cards. Tried such settings, but doesn't works. BAMT 1.3 cgminer from first post.

Thanks, it works as you said
But i also need a way to start and restart vertminer via terminal, is it possible ?
Doing this in normal way - I go login in VNC X session, then press Q on running vertminer terminal, then click on vertminer icon. Too lot actions.

UPD.
I got it how to run simple app on Xscreen, for example
So it will start xterm on xServer, but if i try to run vertminer

UPD2.
I manage to get vertminer and cgminer started from terminal by modifying startup file

But here is one caveat, vertminer/cgminer started in such way don't show GPUs temps and fan speed.

uray,
Thanks for recent update, autostart feature works great.
I got two questions:
1. How may i run vertminer (GPU) when connected via SSH ? Direct run just don't detects any GPU.
2. I saw that vertminer link points to /opt/miners/vertminer/start-session.sh, but it works only if run it inside X session not ssh, why so ?

Also it is good to add some gpumon/viewgpu stat as BAMT has, so it will be easy to parse miners state via terminal.

Why if start vertminer GPU from terminal getting error that GPU not available ? But if i start from Slax menu it working and mining ?
I tried also run /opt/miners/vertminer/start-sessions.sh and /opt/miners/vertminer/start.sh -  same error.
How actually may I run vertminer in terminal and detach screen as in BAMT ?

Is someone tried vertminer 0.5.4pre2 with comes with cryptoslax?
I'm trying to set Gigabyte R9 270 on it. Which settings could be good, or better use older 0.5.2 ?
These settings giving 215 Khs and 185 WU. I think WU could be much better on this cards.

Could someone share settings for 270 (non-X) cards ? I have 5x gigabyte 270 and 5x asus 270.

Reserved

I want to share my bash script for controlling mining servers running on BAMT 1.3/1.5/1.6 or SMOS Linux (optionally PIMP). It may control any number of mining servers. It is preferably to run it against BAMT 1.6 servers as script already included easy function to quickly switch over mining software e.g. cgminer/sgminer/vertminer. Also it is possible to add your own custom compiled miner and switch to it within menu. Tested on Lubuntu 13.10 and on any Debian based distros should work out of box, also it may run on any Linux distro with small modifications.

Big thanks to RLutz
i used part of his code for cron section https://bitcointalk.org/index.php?topic=490840.msg5409109#msg5409109

List of features:

-Power of secured SSH connection (use only SSH)

-Fully interactive menu

-Email notification when mining failed

-Unlimited number of mining servers

-Automatically adds non-password authentication

-Custom colors for menus and messages

-Reboot selected miner or all together

-View/Edit pool config for selected miner

-Switch over between 4 included mining software in BAMT 1.6 + 2 custom

-Real-time monitoring for all servers in one window

-Cron task to periodically control and reboot dead/sick/idle mining servers

Initial setup

1. Download script to any folder

2. Make script executable chmod +x mine.sh

3. Edit mining servers IP in script body. Also configure pools

4. Launch script ./mine.sh

5. Set up non-password authentication. Press 6 (Configure mining server SSH authentication)and proceed to further instructions.

6. All done. You may back to menu and choose desired option.

(Optional)
7. If you would like to setup cron job then you need to run script with cron parameter. For example to test mining servers every 20 minutes add line to crontab. */20 * * * * /root/mine.sh cron
8. Enable email notifications, set notify="YES" and enter email details. Then while running cron task script will perform checks and if mining failed you will get email. Also at any time you may send mining logs from all miners to defined email, this option available within main menu.

How to add your custom miner. As an example explained how to add YACminer.

1.    Copy or compile yacminer in /opt/miners
2.    Change directory to /opt/miners/YACminer and rename yacminer binary to cgminer. Make sure it has executable flag "x" if not do chmod +x cgminer
3.    Rename /opt/miners/YACminer to /opt/miners/custom
4.    Create yacminer configuration file /etc/bamt/custom.conf (Pools and miner settings)
5.    Run bamt.sh and choose "Change mining software.." from the menu then in next submenu choose "custom"
6.    That's it. Yacminer now default mining software. Mining process will restart automatically.

Note: In same way you may add custom1 miner, but make sure to keep these names /opt/miners/custom1 and /etc/bamt/custom1.conf


Please let me know if you found any bugs or want to suggest something.


Screenshots

Main menu


Mining servers' status


Switch over between mining software


Real-time monitoring


Email notifications


Updates:
13.04.2014-Added edit config and restart mining option
11.04.2014 -Added email notifications
08.04.2014 -Separated bamt/pimp scripts
03.04.2014 -Added PIMP support (see PIMP folder)
28.03.2014 -Added card status direct check via cgminer API
25.03.2014 -Added quick ssh login item to menu

You may give me some bounty to support my work and further improvement:

BTC: 1PGgybf5QbCTohCoRgEA4Q5ZSLhpSsg8cn

LTC: Lbw6bd3T3XaMypF1XsuryH3J9zMoY7gLTv


Download: https://github.com/Demontager/minessh/archive/master.zip

Github All further updates will be committed there:  git clone https://github.com/Demontager/minessh

Ok, let me also know if you tweak settings to get 470 kH/s. We have same cards it should work for us in same way. BTW i'm using SMOS 1.3 Linux.

Try following, but these generating 460 Kh/s, for same R9 270 Gigabyte. GPUs run stable for 3 days non-stop, but also want to squeeze at least 470