|
81
|
Alternate cryptocurrencies / Mining (Altcoins) / [HELP] new rig config
|
on: June 02, 2017, 10:51:50 AM
|
|
Hello
I plan to buy new mining rig with rx5xx series
Can you please check components I choose and give some advice?
MSI Z270-A PRO Intel Z270
Intel Celeron G3900 2x 2.80GHz
SSD 120gb
4gb ddr4
1200 Watt Corsair Professional Series HX1200i
6x 8GB Sapphire Radeon RX 570 Nitro+ (EAN 4895106282179 SKU 11266-09-20G)
is there anything better to buy?
|
|
|
|
|
82
|
Local / Altcoins (Hrvatski) / Re: Lisk najperspektivnija cryptovaluta 2017.
|
on: May 26, 2017, 07:12:05 PM
|
Kada kupis Lisk negdje mozes ga prebaciti na web wallet ili na Lisk Nano client https://lisk.io/downloadKada to napravis tamo imas negdje tab "DELEGATES" gdje mozes glasati sa 1LSK ukupno za 33delegata -delegati su ljudi koji imaju zakupljen server i zapravo omogucavaju rad mreze, za to su nagradjeni u lisku (oko 12000LSK mjesecno), da bi postali delegati potrebni smo im mi glasaci, moraju skupiti oko 7% ukupnih glasova u LSK i probiti se u najboljih 101, iz toga razloga neki od njih dijele profit sa svojim glasacima. To je ta dodatna zarada u Lisku koju tuvok007 spominje, zapravo je odlicna za sve koji jednostavno zele kupiti Lisk i ostaviti ga na walletu godinu dana, na taj nacin budu nagradjeni sa finom extra cifrom.  ovakvu sličnu šemu sam vidio i na waves lite platformi, razmišljam probati samo moram izguglati kako se odradi |
|
|
|
|
83
|
Local / Trgovina / Re: [K] Risere,
|
on: May 24, 2017, 05:41:32 AM
|
|
uzmi u europi, dolazi kroz par dana... Meni je iz UK u Zg došlo za 4 dana
|
|
|
|
|
90
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.0 (Windows/Linux)
|
on: April 12, 2017, 11:20:26 AM
|
Claymore, run some test on rx480 to fix the fluctuation problem on rx480 cards.
I use stock cards for tests. Yes at some dcri value I can see memory controller load deviations in GPU-Z, it's about 90% but then it's 65% for a few seconds. For my Nitro+ 480 I see it at "-dcri 47". Try to increase -dcri value a bit, for me "-dcri 50" is stable. Of course your values will be different if you use different card/bios/clocks. Yes it is stable with dcri 50, however it decreases eth hashrate in greater amount. Instead, if possible could you please double check miner code and see if miner works stable, without sacrificing ETH hashrate? For me "-dcri 30" is the most for ETH >> 29.3 ETH, 875 DCR but when using this value, gpus randomly have memory controller load deviations in GPU-Z, and this is seen through miner console. As a result lower effective hashrate is calculated on pool. What if you use "-dcri 35"? i tried that with -dcri 30 i get 142 on eth and 4200 on dcr with -dcri 35 i get 132 on eth and 4600 on dcr it's stable but eth hashrate is much lower |
|
|
|
|
92
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Claymore's ZCash AMD GPU Miner v12.4 (Windows/Linux)
|
on: April 11, 2017, 02:51:46 PM
|
Can someone give me advice? Using latest claymore, cannot get ZEC minner to work as it should Every few shares I get message "GPU #0 returned incorrect data!" Already tried to undervolt that card, then underclock that card, return it to stock values - same! Tried to change riser and again same problem... Other cards works as it should, getting 1660 h/s for 5x480 -i 7, tried to change that also on that card, same problem.... any ideas??  |
|
|
|
|
94
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.0 (Windows/Linux)
|
on: April 09, 2017, 07:43:15 PM
|
yes, for now  i tried to raise memory more but didn't get better result i only modified straps 1750-2000, nothing else, very happy with results Try 1130/2150, maybe you get more, i think 1075 is too low. no man, i have problem with power consumption, i'm on limit - with last settings (2-3 pages before) I got 980w from my corsair rm1000x and I it was too much. Already tried, if I raise core clock on all cards to 1080 mhz my power meter read more than 1000w from wall |
|
|
|
|
96
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.0 (Windows/Linux)
|
on: April 09, 2017, 06:25:32 PM
|
You are forcing max load limits on your PSU. Consider adding a second PSU.
You want to undervolt to lower the energy consumption. Somewhere between 900mv to 950mv should work well. maybe even 880mv if you're lucky. Make sure you reduce both core and mem voltage to same value too
so after little bit tuning today, I got this  and from wall  GPU2 was hanging on these setup so I only set that card to 950mv , it's stable now (will test overnight) -dcri 30, if I set it to 35 I get 10mh/s less on ETH and only 300 mhs more on DCR - not worth it and 30W more power consumption In the end power consumption lowered by 7% and mhs and power are much more stable now |
|
|
|
|
97
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.0 (Windows/Linux)
|
on: April 08, 2017, 07:23:45 PM
|
SAFE LOAD ON PSU SHOULD BE BELOW 70%--
You have a well-made PSU, but the load you specify will wear it out much faster than normal. The capacitors will degrade. Other manufacturer's 1000W PSUs will simply fail immediately. --scryptr
I have no problem with that - warranty is 7 years long my rig is on another location so I'm just worried if it will blow up lol  anyway I set these settings, and now load from wall fluctuates from 890W-950W core 1125, 900 memory 2150, 900 drci 25 eth-130-142mhs / dcr 3200-3600 mhs |
|
|
|
|
Show Posts
