 Show Posts
|
|
Pages: [1] 2 »
|
|
YES, its really Bminer troubles... (with dev fee IMHO)
! Gminer work fine !
i think DEV FEE in next release must be 0% forever.
|
|
|
|
Thank you for job! HiveOS w/19.30 ~same hashrate (1.0-1.3) as 0.9.2, its good. I installed ROCm 2.10 drivers, and hashrate only 0.69 now. What do you think? 6*Vega56 P.S. after testing with only 1 device, hashrate up to 1.04h.... may be high CPU usage... (only with ROCm) |
|
|
|
Random x algo soon?
RandomX not for GPU, its for CPU botnet. |
|
|
|
i hive Vega 56 and Hive os (latest version)
lolminer 0.9.2 grin31
i get the inscription:
"All devices deselected or failed compatiblity check. Closing lolMiner"
what should be done?
update your drivers... 19.10+ i think... |
|
|
|
Well the 1.05 at those settings seem ok ... but why it drops to 0.45 with the lower clocks is strange - can you tell me which hive image you run? (I would pick the beta one, since this has amdgpu-pro 19.30 driver. Also I do not know if hive already pushed 0.9.2 final to their repo)
hiveos-vega-0.6-01@181121 VEGA Linux kernel 4.15.18-hiveos amdgpu-pro-19.30-934563-ubuntu-18.04.tar.xz |
|
|
|
it is possible to get V56 to 1.0 g/s at only 130W (1220/900/0.825v).
HiveOS. Vega 56 with this parameters only 0.45h 1350-1400/900/0.900v - 1.05h |
|
|
|
Testing results (v0.9.1 -> 0.9.2 beta)
Vega 56 (1350 / 920 @ 0.9V): 1.0 -> 1.03 (+3%)
Which amdmemtweak parameters are the best for Vega56 (C31 algo) ? thanx |
|
|
|
|
Thank you, Dev.
15.3.1 works fine!
|
|
|
|
I have 6*1080Ti and 15.1 works fine, but 15.2+ cpu overload...  Celeron G1840 What CPU recomended for 15.2+ ? Pentium Dual Core, i3 or better? |
|
|
|
Same problem with Dev pool connection.  What option for disable colors? Blue color is very unreadable... (only linux, windows colors - cyan is ok) |
|
|
|
|
I wand add this miner to HiveOS (custom miner).
Please add direct ftp link to AceGirnMiner .TAR file
Thanx
|
|
|
|
Vega56 ref
1.6.8 auto Intensity = 120
1.6.9 auto Intensity = 112, HR little bit slowly, may be the same after tuning "fragments"...
intensiti 112 give smaller hash then intensity 120 ? VERY INTERESTING!  Yes...VERY INTERESTING! 1.6.8 auto Intensity = 120, HR ~14000 1.6.9 auto Intensity = 112, HR ~13900 1.6.9 manual Intensity = 116, HR ~13700 1.6.9 manual Intensity = 120, HR ~13800 1.6.9 manual Intensity = 124, HR ~13600 |
|
|
|
Rig with 588+7*Vega56 works well on 1.6.8, HR~14000
after update to 1.6.9 hashrate ~13900, and its not stable.
1.6.9 faster on Vega56 & Vega64 then 1.6.8 Vega56 ref 1.6.8 auto Intensity = 120 1.6.9 auto Intensity = 112, HR little bit slowly, may be the same after tuning "fragments"... |
|
|
|
|
Rig with 588+7*Vega56 works well on 1.6.8, HR~14000
after update to 1.6.9 hashrate ~13900, and its not stable.
|
|
|
|
|
Please, add --tt option (target temperature) and fan control. THANX
|
|
|
|
|
1.3.2
Vega56 - same hashrate as CAST-XMR, ~1800-1900 (GPU 1474, MEM 920, PL -15%) blockchain driver.
Its good. Now i will test stability.
{ "id" : 0, "intensity" : 120, "worksize" : 8, "threads" : 2},
|
|
|
|
|
Have CAST-XMR failover pools support?
How i can use it?
|
|
|
|
|
0.31 & 0.33 have two problem at my rigs:
--exit-on-zero Not worked, miner continue work with 0 sol at one of cards.
Miner not come back to 1st pool after any minutes and continue work at failover pool.
|
|
|
|
Does someone have multi-gpu rigs' memory & cpu - usage problem?
I have problems (equihash96_5) with one of two rigs: 1st rig works fine & stable. Its 13 GPU: RX470*10+RX480+RX570*2 CPU: Celeron G3930 (cpu usage 35-65%) and 8GB of memory 2nd rig works bad & reboot every 30-40 minutes, becouse CPU usage up from 25% to 96% in 30-40min... and then reboot Its 7 GPU: 1080Ti*6+1070 CPU: Celeron G1840 (cpu usage from 25% to 96%) and 8GB of memory This rig stable with other miner programs. I think its not slow-CPU problem, becouse G3930=G1840 and its program optimization problem... or nVidia...Optiminer, what do you think about it? |
|
|
|
|
Hi!
How it can be integrated in ethOS ?
|
|
|
|
|
