Show Posts
|
Pages: [1] 2 3 »
|
Ok habe es versucht aber scheinbar will die niemand haben. Da ich jetzt einen Strompreis von unter 8 Cent für die Karten habe, lass ich die selber weiter laufen Thread kann zu, lg Gary
|
|
|
Hallo Community, ich habe 7 baugleiche Karten zu verkaufen. Sehr gerne über das Forum, Bezahlung im Voraus auch gegen BTC möglich. Alle Karten sind einwandfrei in Ordnung, keine Lüftergeräusche o.ä. Auf Wunsch können die Rechnungen (Caseking - Ende 2016) beigelegt werden. Die Grafikkarten werden komplett gereinigt und getestet geliefert. Fixpreis : 1700 Euro - Versand innerhalb EU übernehme ich. (außer bei Ebay Kauf) Anbei der Ebay Link für eine alternative Kaufabwicklung: https://www.ebay.at/itm/7-x-Sapphire-Nitro-Radeon-RX-480-8GB-GDDR5-w-Backplate-Mining/232786638953lg Gary
|
|
|
Ja dann willkommen Bei Fragen und Anregungen einfach in discord posten. Bin fast rund um die Uhr da.
|
|
|
Wir suchen noch nach ein paar Members
|
|
|
Willkommen Sind schon zu einem etwas größeren Grüppchen angewachsen ^^
|
|
|
So basically we will get it but won't be able to trade it, right?
Hopefully we can mine it, before you can trade it
|
|
|
Why always Premine. A Founders Reward would look much better for Exchanges, Investors,etc etc
|
|
|
Ja Ist aber noch nicht viel los - ganz frischer Launch ^^
|
|
|
Hallo BCT Community, ich darf euch unsere discord Mining Community vorstellen. Die Idee dahinter: Eine Gruppe von erfahrenen kleineren bis mittleren Minern, die sich gegenseitig bezüglich Hard- und Software unterstützen. In erster Linie geht es um die sogenannten Hot-Coins, Coins die gerade frisch gelaunched wurden. Wir haben einen bekannten Poolbetreiber unter uns, der uns zeitnah Pools zur Verfügung stellen wird. Es liegt nun an uns zu bewerten ob neue Coins es wert sind, genauer betrachtet zu werden und ggfs. ein Pool eingerichtet wird. Ihr kennt ja die meisten Ausscheidungskriterien selbst (keine Wallet, hohe Premine, Masternode Fees, Founders Reward, Whitepaper, Roadmap, greedy dev´s usw.) Das Bitcointalk Forum ist sehr hoch frequentiert und neue interessante ANN´s und ICO´s verschwinden da schnell im Untergund. Dies ist ein weiterer Punkt: Viele Augen sehen auch mehr und so können wir den einen oder anderen Coin direkt beim Launch erwischen. Sollte der Pool noch nicht stehen, gibt's Anleitungen für vorübergehendes Solomining. Mir fallen da noch 100 weitere Gründe ein warum das hier ein Erfolg werden könnte, aber ich möchte den Thread nicht zu aufwendig gestalten. Es werden nur deutschsprachige Community Mitglieder eingeladen - die Channelsprache ist deutsch. Ich bitte um Verständnis. Danke für eure Zeit und auf gute Zusammenarbeit, Gary PS: Ein Dankeschön im voraus an mk4y, dem Channeladmin und altminer.net, unserem Poolbetreiber. DE Mining Community: https://discord.gg/m9EjZ2R
|
|
|
I can only talk about my experience. Mine took 80 conf. (new coins) Normal Transactions depends on Fees, too.
regards
Gary
|
|
|
How long will it take for coins to mature?
80 Confirmations for new coins 10 Confirmations for Transactions
|
|
|
sgminer-phi AMD VEGA 64 8GB watercooled = 30-31 Mhs { "pools": [{ "url": "http://127.0.0.1:6667", "user": "xxx", "pass": "xxx" }], "profiles": [{ "gpu-powertune": "0", "name": "eth", "algorithm": "phi", "gpu-threads": "2", "xintensity": "21" }], "no-extranonce": "true", "default-profile": "eth", "temp-cutoff": "85", "api-listen": true }
|
|
|
solo ? solo pool? please!!!!!
You can easily solo mine direct to your Windows wallet: start Pirl CLI Client with (change ip address to your ip address): pirl-windows-amd64.exe --rpc --rpcaddr 192.168.1.100 --rpcport 8545 start miner eg. Claymore with (change ip address to your ip address): EthDcrMiner64.exe -epool http://192.168.1.100:8545 -tstop 85 -allcoins 1 -dbg -1 -allcoins 1 is important for devfee (Ethereum) Thats it. regards Gary CLI Client: https://github.com/pirl/pirl/releases/tag/1.0.0
|
|
|
What is the speed for rx vega 64?
I get 519h/s with single watercooled RX Vega 64 8GB on stock. Driver 17.9.1 CM 12.6 regards Gary
|
|
|
Quick question... What port do I forward in my router to get more connections? I want to help support the network. Address: ZKe8oXuMLFMZFfEgdL5gaKuBi27MQ3a6rX 10497
|
|
|
@MrJaekin Yes you did it The block (Looks like Accepted ....) goes straight as Transaction in your wallet - nothing to tell. Sgminer works with findblocks.com - tested. My Config File with only ip,port,user and Password changed. Its Time for Pools now i think - Network Hash and Diff raises
|
|
|
Mining Solo with GPU´s on different Rigs: Tell your Wallet to listen RPC: /user/xyz/appdata/roaming/Elysium/elysium.conf (create if not exist). Example elysium.conf : rpcuser=xyz rpcpassword=xyz rpcconnect=your wallet ip rpcallowip=192.168.1.* rpcallowip=127.0.0.1 rpcport=10498 server=1 listen=1 daemon=1 gen=0 genproclimit=18 addnode=59.95.128.66
Download sgminer5 (i use sgminer 5.5.5-gm 4) or any other with scrypt Algo Support. Start sgminer.exe --config sgminer.conf Example sgminer.conf : { "pools": [{ "url": "your wallet ip:10498", "user": "xyz", "pass": "xyz" }], "profiles": [{ "gpu-powertune": "0", "name": "els", "algorithm": "scrypt", "gpu-threads": "2", "xintensity": "21" }], "no-extranonce": "true", "default-profile": "eth", "temp-cutoff": "85", "api-listen": true }
Tested with RX 480 (620 Mhs) and R9 390 (720 Mhs). ELS Address for Bounty ^^ ZEsTzPwzr2WPK6zqfVn3RgzHRn1AiBm4mx hope this helps Gary PS: SGMiner should work on Pools too. elysium.conf file does not exist View image: https://ibb.co/ku2aBFyes , u need to create one and then mine . Cheers and Welcome !! I've followed your instructions... how do I know if I'm mining? Does this look right? All RX480s sgminer 5.6.0-nicehash-48 - Started: [2017-02-04 23:09:06] - [0 days 00:05:22] -------------------------------------------------------------------------------- (5s):141.5K (avg):138.9Kh/s | A:0 R:0 HW:0 WU:186.539/m ST: 7 SS: 0 NB: 2 LW: 0 GF: 0 RF: 0 Connected to 192.168.1.131 (longpoll) diff 2.09M as user John Block: e24cc42c... Diff:2.09M Started: [23:09:35] Best share: 1.35K -------------------------------------------------------------------------------- [P]ool management [G]PU management ettings [D]isplay options [Q]uit GPU 0: 38.0C 2832RPM | 23.58K/23.39Kh/s | R: 0.0% HW:0 WU:0.749/m I: 8 GPU 1: 40.0C 2737RPM | 23.58K/23.40Kh/s | R: 0.0% HW:0 WU:75.477/m I: 8 GPU 2: 38.0C 2731RPM | 23.57K/23.38Kh/s | R: 0.0% HW:0 WU:24.347/m I: 8 GPU 3: 38.0C 2793RPM | 23.57K/23.38Kh/s | R: 0.0% HW:0 WU:6.930/m I: 8 GPU 4: 37.0C 2740RPM | 23.58K/23.39Kh/s | R: 0.0% HW:0 WU:43.638/m I: 8 GPU 5: 37.0C 2826RPM | 23.59K/23.39Kh/s | R: 0.0% HW:0 WU:35.397/m I: 8 -------------------------------------------------------------------------------- [23:08:59] Startup GPU initialization... Using settings from pool 192.168.1.131. [23:08:59] Startup Pool No = 0 [23:08:59] No suitable long-poll found for http://192.168.1.131:10498 [23:08:59] Error -42: Loading Binary into cl_program (clCreateProgramWithBinary) [23:08:59] Building binary ckolivasEllesmeregw256l4lg2tc32320nf10.bin [23:09:04] Initialising kernel ckolivas.cl with nfactor 10, n 1024 [23:09:04] Initialising kernel ckolivas.cl with nfactor 10, n 1024 [23:09:04] Initialising kernel ckolivas.cl with nfactor 10, n 1024 [23:09:05] Initialising kernel ckolivas.cl with nfactor 10, n 1024 [23:09:05] Initialising kernel ckolivas.cl with nfactor 10, n 1024 [23:09:05] Initialising kernel ckolivas.cl with nfactor 10, n 1024 [23:09:11] API running in local read access mode on port 4028 (88548)
Connection is ok. Try start with sgminer.exe -config sgminer.conf -I 21 Your Intensity is only 8. regards Gary
|
|
|
Tested with RX 480 (620 Mhs) and R9 390 (720 Mhs).
are you shure about speed? 620Mh/s? really? Yes ^^ mem oc @ 2150 Thx for Bounty :-)
|
|
|
Mining Solo with GPU´s on different Rigs: Tell your Wallet to listen RPC: /user/xyz/appdata/roaming/Elysium/elysium.conf (create if not exist). Example elysium.conf : rpcuser=xyz rpcpassword=xyz rpcconnect=your wallet ip rpcallowip=192.168.1.* rpcallowip=127.0.0.1 rpcport=10498 server=1 listen=1 daemon=1 gen=0 genproclimit=18 addnode=59.95.128.66
Download sgminer5 (i use sgminer 5.5.5-gm 4) or any other with scrypt Algo Support. Start sgminer.exe --config sgminer.conf Example sgminer.conf : { "pools": [{ "url": "your wallet ip:10498", "user": "xyz", "pass": "xyz" }], "profiles": [{ "gpu-powertune": "0", "name": "els", "algorithm": "scrypt", "gpu-threads": "2", "xintensity": "21" }], "no-extranonce": "true", "default-profile": "eth", "temp-cutoff": "85", "api-listen": true }
Tested with RX 480 (620 Mhs) and R9 390 (720 Mhs). ELS Address for Bounty ^^ ZEsTzPwzr2WPK6zqfVn3RgzHRn1AiBm4mx hope this helps Gary PS: SGMiner should work on Pools too.
|
|
|
|