 Show Posts
|
|
Pages: [1] 2 3 4 5 »
|
|
1
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.4c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
|
on: January 08, 2021, 04:06:15 AM
|
GPU 1: Allocating buffers failed with: clCreateBuffer (-4)
Fatal error. Restarting...
happens with all cards, 1,2,...
I have 3 same rigs, only one does this!
Anyone know what is the problem? Cards are RX470, 8gb. Tried many drivers and last 3 versions of PM.
Nevermind, -gser fixed it!
edit: no, just another error, something "kernel unknown"?
Hi ! same here... My Sapphire RX470 8GB suddenly stop mining. |
|
|
|
|
2
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
|
on: December 06, 2020, 03:14:09 PM
|
I would really love to see a screen shot of ANYONE that can pump out more than 30 MH/card on (12+ per rig) RX 580 cards and hash stable for more than 24 hrs. No matter what I try it just will not happen. As soon as I push to 30 or higher, the rig will start to crash. I used to tune individual cards and get higher hash rate but that function has been broken since forever ago. So I would really love to see if anyone out there is actually able to achieve this.
Here You Go man: My 12 Card RIG with 8* RX580 8GB, RX5700, 3* RX5700XT  I appreciate your screen shot but it only shows your rig at 47 min. I was asking if anyone can show a rig running 30+ MH for more than 24 hr. Side note: Did PM ever fix the problem with not being able to set cclock and mclock for individual cards?one of my rig...  |
|
|
|
|
3
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
|
on: December 03, 2020, 04:49:18 AM
|
After a few hours mining my second GPU stops mining and I see 0.000 MH/s with the statement "wdog GPU2 not responding" and "wdog Thread(s) not responding. Restarting." But nothing happens.  I am not sure how to resolve this issue so I am looking for ideas here. Below are the details of my set up. RX 580 Saphire Nitro - stock bios Driver: Adrenalin 2020 20.9.1 Miner: Phoenix 5.3b cclock: 1170 mclock: 2170 cvddc: 850 mvddc: 850 Fan: 35 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 "C:\Users\Arthur\Desktop\Ethereum\Phoenix ""Miner\PhoenixMiner.exe" -amd -daglim 1 -dagrestart 1 -eres 0 -rvram 0 -rxboost 1 -pool eth-us-east1.nanopool.org:9999 -pool2 eth-us-west1.nanopool.org:9999 -wal 0x....../xxx@gmail.com -pass x -proto 2 -gt 43,77 -cclock 1200,1170 -mclock 2200,2170 -cvddc 850 -mvddc 850 -astats 1 Any idea or assistance is appreciated. thanks Hi , i got the same card... RX 580 Saphire Nitro - try MOD BIOSDriver: Adrenalin 2020 20.9.1 = okMiner: Phoenix 5.3b = okcclock: 1170 = 1150mclock: 2170 = 2100cvddc: 850 = 875mvddc: 850 = 875Fan: 35 That could give you 30MH  Thank you for posting your numbers, this helps me tune the card. can you give the detail config for 5700xt, tks Too bad I don't have 5700 |
|
|
|
|
5
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
|
on: November 30, 2020, 04:59:10 PM
|
After a few hours mining my second GPU stops mining and I see 0.000 MH/s with the statement "wdog GPU2 not responding" and "wdog Thread(s) not responding. Restarting." But nothing happens. I am not sure how to resolve this issue so I am looking for ideas here. Below are the details of my set up. RX 580 Saphire Nitro - stock bios Driver: Adrenalin 2020 20.9.1 Miner: Phoenix 5.3b cclock: 1170 mclock: 2170 cvddc: 850 mvddc: 850 Fan: 35 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 "C:\Users\Arthur\Desktop\Ethereum\Phoenix ""Miner\PhoenixMiner.exe" -amd -daglim 1 -dagrestart 1 -eres 0 -rvram 0 -rxboost 1 -pool eth-us-east1.nanopool.org:9999 -pool2 eth-us-west1.nanopool.org:9999 -wal 0x....../xxx@gmail.com -pass x -proto 2 -gt 43,77 -cclock 1200,1170 -mclock 2200,2170 -cvddc 850 -mvddc 850 -astats 1 Any idea or assistance is appreciated. thanks Hi , i got the same card... RX 580 Saphire Nitro - try MOD BIOSDriver: Adrenalin 2020 20.9.1 = okMiner: Phoenix 5.3b = okcclock: 1170 = 1150mclock: 2170 = 2100cvddc: 850 = 875mvddc: 850 = 875Fan: 35 That could give you 30MH |
|
|
|
|
11
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.2e: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
|
on: November 27, 2020, 11:57:31 AM
|
Hello PhoenixMiner I am trying bench mode on ETC to test my RX580 4G, but RAM size seams still too low My bat command : PhoenixMiner.exe -bench 400 -coin ETC Log shows : 2020.11.27:11:33:06.056: GPU2 GPU2: DAG size limited from 4223 MB to 4023 MB
2020.11.27:11:33:06.981: GPU2 GPU2: Free VRAM: 3.951 GB; used: 0.049 GB
2020.11.27:11:33:06.981: GPU2 GPU2: DAG size limited from 4223 MB to 4023 MB
2020.11.27:11:33:06.981: GPU2 GPU2: Disabling DAG pre-allocation (not enough VRAM)
2020.11.27:11:33:06.981: GPU2 GPU2: Allocating DAG for epoch #400 (3.93) GB
2020.11.27:11:33:07.002: GPU2 GPU2: Generating DAG for epoch #400 And I only get 1MH/s Is my command wrong ? Thanks Dude 400epoch wrong after fork it will be 195 @Phoenix thanks for update. waiting for next update with srtraps for polaris cards. STRAP coming niceeeee |
|
|
|
|
12
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.2e: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
|
on: November 27, 2020, 10:39:25 AM
|
Hello PhoenixMiner I am trying bench mode on ETC to test my RX580 4G, but RAM size seams still too low My bat command : PhoenixMiner.exe -bench 400 -coin ETC Log shows : 2020.11.27:11:33:06.056: GPU2 GPU2: DAG size limited from 4223 MB to 4023 MB
2020.11.27:11:33:06.981: GPU2 GPU2: Free VRAM: 3.951 GB; used: 0.049 GB
2020.11.27:11:33:06.981: GPU2 GPU2: DAG size limited from 4223 MB to 4023 MB
2020.11.27:11:33:06.981: GPU2 GPU2: Disabling DAG pre-allocation (not enough VRAM)
2020.11.27:11:33:06.981: GPU2 GPU2: Allocating DAG for epoch #400 (3.93) GB
2020.11.27:11:33:07.002: GPU2 GPU2: Generating DAG for epoch #400 And I only get 1MH/s Is my command wrong ? Thanks you should bench on the ETC test net |
|
|
|
|
20
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.1c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
|
on: August 20, 2020, 01:13:00 AM
|
Hi, I'm having problem on one my rig with 5 GTX 1070/1070Ti and PhoenixMiner v5.1c. Rig is crashing every time while DAG file is created. On other rigs with 4 GPU I do not have problems with Rigs crashing. Also Clay is working without problem on this rig with 5GPUs. I would like to use PhoenixMiner but I do not know what is the problem. Also I've tried few nVidia drivers no difference. This Rig was off for last year and I've started back mining few days ago. Does someone have idea what could be problem with this Rig? Thanks
Just quick update, in my case problem was faulty riser card. After replacing with new one PhoenixMiner is working just fine. But only what is really confusing how Clay was working with faulty riser when PhoenixMiner didn't want even to start. i notice claymore using less power |
|
|
|
|
