Show Posts
|
Pages: « 1 2 [3] 4 5 »
|
now running only the last GPU.. still same issue ! What operating system? Drivers version? What are the full launch options? Hi, I am using Windows 10 64bit, Driver 19.4.3 timeout 5 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -pool asia1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal wallet.rig -proto 3 -acm -pass x -lidag 1 -wdog 0 -hstats 2 -tt 75 -mt 1 -cvddc 875 -mvddc 875 -cclock 1025 -mclock 2025
|
|
|
Thanks for the reply ! After set -gt for all GPU, the problem still same ... Guys need some help !
I'm running version 5.0e now.
Only issue now is the last GPU running slow (not being tuned?)
FYI all GPU are same specs AMD
For my 6 GPU RIG
GPU1,2,3,4,5,6, GPU6 will be the slowest of all
For my 4 GPU RIG
GPU4 will be the slowest of all
Make autotune for -gt parameter. You set it manually? Or make autotune? Both same... Hmmm, it's strange... Try to launch mining only on that last GPU. Need to try other miner to exclude miner bug. now running only the last GPU.. still same issue !
|
|
|
Thanks for the reply ! After set -gt for all GPU, the problem still same ... Guys need some help !
I'm running version 5.0e now.
Only issue now is the last GPU running slow (not being tuned?)
FYI all GPU are same specs AMD
For my 6 GPU RIG
GPU1,2,3,4,5,6, GPU6 will be the slowest of all
For my 4 GPU RIG
GPU4 will be the slowest of all
Make autotune for -gt parameter. You set it manually? Or make autotune? Both same...
|
|
|
Thanks for the reply ! After set -gt for all GPU, the problem still same ... Autotune = same set -gt = same Guys need some help !
I'm running version 5.0e now.
Only issue now is the last GPU running slow (not being tuned?)
FYI all GPU are same specs AMD
For my 6 GPU RIG
GPU1,2,3,4,5,6, GPU6 will be the slowest of all
For my 4 GPU RIG
GPU4 will be the slowest of all
Make autotune for -gt parameter.
|
|
|
Guys need some help ! I'm running version 5.0e now. Only issue now is the last GPU running slow (not being tuned?) Autotune = same set -gt = same FYI all GPU are same specs AMD For my 6 GPU RIG GPU1,2,3,4,5, 6, GPU6 will be the slowest of all For my 4 GPU RIG GPU4 will be the slowest of all
|
|
|
46
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: NBMiner v30.2, GPU Miner for ETH, RVN, GRIN, AE, BTM, SERO, HNS, BFC, SIPC, TRB
|
on: May 07, 2020, 06:27:19 AM
|
hey guys any good settings for P106 6GB ? I am getting around 9.5Mh/s My setting 70% power limit
|
|
|
Will using the strap option likely make the card run hotter? Or is it just an efficiency thing?
I use '-ethi 0' (Ethereum intensity) so my card runs cooler for various reasons. Will using '-strap 1' with '-ethi 0' cancel each other out? Basically I'd like to use the strap option but not if it will make the card run hotter.
Yes it will use more electricity and it will run hotter. How the ETH algo works its mostly limited by the memory speed. So most of the time the GPU is not doing much since its waiting for the memory to complete its job. By changing the memory straps the memory runs faster and is able to provide the GPU compute the data to analyse quicker, so your speed increases from like 23MH/s to 30MH/s (if RX 570). Since the GPU uses more resources it uses more power and hence runs hotter. This is actually why it was possible to dual-mine with ETH, because the GPU didn't do much most of the time and it was possible to mine at full ETH speeds while also dual mining other coins like DCR or SIA or PASC. i got 2 cards died after using the strap and rxboost
|
|
|
NOTE: please upgrade to v15.0 as soon as possible, old versions support up to #299 epoch only, they will fail then! v15.0 supports up to #384 epoch (4GB DAG size).
YES SIR !
|
|
|
With the new version of Claymore, what WIN10 version (updates) are you using and what are the best drivers for RX 4xx & 5xx cards?
I am running windows 10 1803. rx570 4G @ Driver 19.4.1 Original BIOS I've tried straps 1-5, and POL4Hx@1900. Windows crashes immediately. Without strap, everything runs fine, but @22MH with compute on. I use wattman not afterburner. this is not a good result, you have to run this card around 30Mhs... depends on the RAM type, but this is the level you have to reach Well, he said he's running original BIOS... I see that but he has tried something with the straps and is unstable, obviously With this last Clay version the bios can remain untouched (flash) but there is a solution to play with the straps and drivers, so I'm returning on my first question, "the best drivers for RX 4xx & 5xx cards?" I tested it by installing amd driver 19.4.3 and after that Claymore driver ("Ethdcrminer64 -driver install") as an admin on cmd prompt then added "-strap 1" to end of bat file. I did over- and underclocking in AB. (RX4?0) . Worked perfectly. I've figured it out. And claymore should have give clear instructions in the readme. 1. run cmd with admin rights 2. cd to the ethminer folder and run: eth..64.exe -driver install 3. restart 4. overclock your AMD cards as usual. 5. now add -strap to your start.bat and everything will be ok. --------- Nothing has changed for me. It's the same hashrate (29.3) as 12.0 on blockchange driver and a modded bios. Failed, miner activated Windows Test Signing Mode, please reboot to apply it and start miner again.
|
|
|
strap 1 or 2 not working for Sapphire Pulse RX580 4GB Samsung... no change in hashrate... Latest AMD driver
|
|
|
ok i will try PPT me is Sapphire Vega 64... HBM2 Samsung
|
|
|
hey guys,
How come i can't set the VDDC lower than 900mv? seems like stuck at 900 lowest
|
|
|
@cscheat Timings were published for 51.5mh around page 8 by N2DCRYPT and also by me hereTry them. Thanks Zorg33 ! btw, how to get timings for different memory for 470/480/570/580
|
|
|
<values cl="22" ras="35" rcdrd="16" rcdwr="12" rcab="44" rcpb="44" rpab="14" rppb="14" rrds="3" rrdl="5" rtp="5" faw="20" cwl="7" wtrs="4" wtrl="9" wr="16" rrefd="8" rdrddd="3" rdrdsd="2" rdrdsc="1" rdrdscl="3" wrwrdd="3" wrwrsd="2" wrwrsc="1" wrwrscl="3" wrrd="1" rdwr="19" ref="17550" mrd="8" mod="15" xs="270" xsmrs="8" pd="8" cksre="10" cksrx="10" rfcpb="160" stag="7" xp="8" cpded="2" cke="8" rddata="19" wrlat="5" rdlat="14" wrdata="1" ckestag="2" rfc="247">
VEGA 64 = 50MH
HBM Samsung
|
|
|
Hey guys,
getting error message while trying to run --current
Failed to load EIO.dll
|
|
|
Mr CLaymore. any ETA for CLAYMORE V12 ?
|
|
|
any solution for this?
|
|
|
I think GPUZ could be wrong sometime
I have a few gigabyte RX570 showed hynix in GPUZ, but when I check the Memory using PBE, it showed Samsung
Just back up individual gpu rom you will be fine
|
|
|
|