 Show Posts
|
|
Pages: [1] 2 »
|
|
Just tried out v0.5 and its great so far. Awesome hashing improvement on my 1070 & 1080ti. Thanks and great work EWBF!
|
|
|
|
Any chance you'll be adding the new EWBF miner to the WatchBot? I tried the old EWBF WatchBot on it and it just kills the process after 5 mins or so until it reboot the system. Here's the link to the new miner. https://bitcointalk.org/index.php?topic=4466962.0 |
|
|
|
It's clean. It does only one thing, it mines ZEC.
Launch it in a VM and monitor everything u can to get confident.
Hello! Long time fan here. Would you please update to include 144-5 for btcz +++1 i agree..  |
|
|
|
current problems:
'intensity 0' now feels like 'intensity 10' with 0.3.4 version - cant play/watch videos while mining
hope you optimize it
Ya please look at the intensity.. previously on intensity 2 i could still watch a video with no hesitation or lag and now it seems no matter what setting i have it on the intensity is too much to run smoothly. Thanks |
|
|
|
So i get a strange thing happening in 6.1. I have two 1080ti's on my comp and when i run my second card by itself the output shows only the first line of hash info and then stops displaying any info except for difficulty changes. The card is hashing and is reporting on the pool but the output display just shows the difficulty changes. If i run my first card by itself and if i run the two cards together they output fine just how they are suppose to.. Must be a little glitch with running dev 1 only i guess. Anyone else running into this? Great miner by the way.. https://imgur.com/a/BP5ulKB |
|
|
|
|
it says right in your error "gpu 2 unresponsive - check overclocking"...... So maybe you should lower you gpu2 overclock... lol
|
|
|
|
How do you set up failover pools? I've searched and I'm not finding an answer.
Thanks
So I've skimmed the forums since release of 0.6 and didn't see anything concrete on how to setup failover pools. I was hoping for a --failover (pool,worker,password) but didn't find a solution yet. Can anyone that has gotten it to work quickly post how its done? Much appreciated.
look inside the zm.cfg file |
|
|
|
Any way to restart the miner after GPU unresponsiveness? 2018-02-21 14:20:28|gpu_id 4 54 1 unspecified launch failure
2018-02-21 14:20:28|gpu 4 unresponsive - check overclocking
2018-02-21 14:20:28|cudaMemcpy 1 failed
Use this Miner Autorun (Watchdog) https://bitcointalk.org/index.php?topic=2071108.0Thank you for that recommendation. That looks fine, but requires to use windows. I am running a linux rig... :-/ Any other idea? Hmm there must be something similar for linux but i don't use linux. You are getting a overclock error so just crank down your OC on your card/cards a bit and it should run pretty solid.. |
|
|
|
Any way to restart the miner after GPU unresponsiveness? 2018-02-21 14:20:28|gpu_id 4 54 1 unspecified launch failure
2018-02-21 14:20:28|gpu 4 unresponsive - check overclocking
2018-02-21 14:20:28|cudaMemcpy 1 failed
Use this Miner Autorun (Watchdog) https://bitcointalk.org/index.php?topic=2071108.0 |
|
|
|
Hi. Sorry for this Noob Question  but do this miner works on MPH to mine Classic too? Classic what? zclassic? then yes. This is a equihash miner so it will mine any coin based on the equihash algorithm no matter what pool its on in general.. |
|
|
|
Hi guys quick question about <accepted shares ratio> <network latency in ms> I have 2 rigs using DSTM on nicehash equihash 1st question, why my accepted shares ratio is 1.00 on one rig and my second rig is always under 1.00 2nd question is latency 125 on nicehash usa normal? 3rd one im also getting share above target once a while, why? Rig1  Rig2  thanks maz 1. shares ratio will sometimes be under 1.00 when you have a rejected share.. .99 is not a prob. if its worse than that maybe one of your cards is overclocked a little to much and is producing rejected shares from time to time. 2 i'm not sure about the ping it all depends where you live and your internet connection but 125ms isn't to bad 3. i don't know what you mean by share above target? |
|
|
|
Hello guys,
I have a question.
If I use DSTM in NICEHASH, do I need to pay:
dstm's ZCash Cuda miner:
Contains 2% devfee.
Nicehash:
2% internal wallet fee
= 4%?
You don't have to do anything they've already paid themselves.... lol.. but ya those are the fees.. i think nicehash takes more than just %2.. i think its %2 just to deposit into their wallet and then they charge again for a withdrawal i think.. Really you should steer clear of nicehash and use your own wallet and use whattomine to see whats the most profitable for your card/cards.. |
|
|
|
- ui: add colorized output
how it works I can not see any difference
It works via RTFM CTFD... It works in win10 but not in win7 |
|
|
|
|
i can't seem to get the intensity setting to work right. i Have a 1080ti win7-64. It seems that when i use a setting of .9 my hashrate will go from 700sol/s to 120sol/s.. lol which is a bit to low for %90 intensity.. Then if i use .1 which is %10 intensity i get 65sol/s. Is anyone getting this to work properly on their cards?
|
|
|
|
|
2% is a lot.. 0.05% is closer to reality for the few lines of code..
[/quote]
Hahaha.. "Few lines of code"... only if... i would have made my own miner long ago.. haha
|
|
|
|
|
I was very skeptical as well for a long time and then I did a 48hr test on 3 1070's on the same rig with the exact same OC's. One running bminer, bminer -nofee and dstm. So bminer seems to start a little slow but by the end bminer was ahead of dstm by a bit so it seems very comparable if not a little faster but who knows exactly with miner luck and what not.. In the case of 1080ti's i find it runs better than dstm.. Thats what i got from my tests... I still like running dstm on my rigs for stability with a monitoring program keeping a eye on it.
|
|
|
|
How to get the miner auto start after it crash and window pops up a box with " zm is stop working " ?
use this script ( completly open source and free) by Acrefawn. It will take care of your rigs automatically, restart at set intervals or if errors happen. It's pretty great. If you use it and it's helpful remember to support the dev after you tested it thoroughly. https://bitcointalk.org/index.php?topic=2071108.0I second that.... It's a great script |
|
|
|
shit now i can't connect to the US server anymore 45.79.223.173.. It pings but when i use a miner and try to connect it fails... lame. I really thought this server problem was going to be short lived but it looks like i was dead wrong... |
|
|
|
I was mining BTG for at least 4hours... and all my credit disappearead .... I don't know if I did something wrong.. but mining ZCL was normal... I just tryed to change the command line: mine.bat - ZCL: bminer -uri stratum://user.worker:pwWorker@zcl.suprnova.cc:4042 (WORKING) BTG: bminer -uri stratum://user.worker:pwWorker@btg.suprnova.cc:8816  I deleted the text inside mine.bat with "@echo off"etc... and used just the command above. I really wanna mine BTG with this miner... can someone help me plz? if thats the command line your using you have to use your suprnova username in there... eg. -uri stratum://pietroow.worker1@btg.suprnova.cc:8816 otherwise it should work. |
|
|
|
|
I'm getting some high ping rates on the US server again today. It's bouncing from 90ms to 9000ms just crazy...
|
|
|
|
|
