Hello

How do the following commands work with claymore?

I would like that my card starts with the voltages following 950mv and the fans has 50% minimum, I therefore apologize these commands in the .bat

But it does not work.

-cvddc 950 -mvddc 900 -fanmin 50

an idea ?

thank you

Hello ,

Is what you mining with dual claymore with this card ref?

What are the volt / frequency settings? Stable

thank you

perso j'ai investi dans un rig complet avec 6 rx 480 et franchement depuis decembre j'ai deja pas mal d'eth c .

 
perso j'ai commencer avec eth , mais suivant les calcul et la hausse du classic je suis sur le classic actuellement ,

je les revend quand le prix est assez haut et quand il chute je les rachete,

moi j ene pense pas que ethereum va mourir , pourquoi cela ?

i instal last driver = black screen

I have a rig 6x rx 480, for mining only.

And I also have a pc gameur, which I have 2 rx 480.

And for games it is important to play with the latest driver released to optimize the latest games released.

But from what I read on various forums, the last driver relive detects when a bios and modified, and the installation of the driver hangs,

I moded my bios to optimize the hashrate, but I can no longer install the drivers relive, I'm staying on the 16.10.3

How did you do to install the relive driver with modified bios?

Hello who managed to install the latest driver relive with the bios mode?

Because the driver relive blocks the gpu with bios moded

I followed a tutorial on youtube = https://www.youtube.com/watch?v=c3kDXfH6M5A

but it does not work, nobody has another solution?

thank you in advance

2gb card is to small for mining

Hello
Currently I am with windows 7.

I will install windows 10, but I read on different topic that you must patch a driver to optimize the hasrate.

Would you have a link or tuto on this patch?

thank you

We can sell them after the siacoin?

salut a tous ,

des gens qui mine le siacoin ici ?

j'aimerai savoir pourquoi a t'on une adresse diférente a chaque fois qu'on clic sur receive adresse ?

dans la sia UI .


quand on clic sur receive la précédente est annulé ?

hello

Who mine the siacoin here?

I would like to know why we have a different address each time we click on receive address in sia UI?

it's normal ?

Hello

We can mine eth + litcoin with claymore?

Hello

I also had problems when I add my 6th card,

You have to change the registry base so that the 6 cards appear.

Here is the link: https://lbr.id.lv/6xgpu_mod/

And connect your screen to card 2 (pci 16) of the motherboard, because if you plug in card 1, I have a black screen.

Yes it's possible

Before I had 5 rx480 with a lepa 1000w power supply (80 bronze)

The overclock of the memory is blocked on I understand well?

How can I fix this problem?

I did not quite understand what you meant my friend

I have a rig with 6rx 480 (reference)

Bios mode like this: copy timmings 1750 to 2000

and that's all .

Then in wattman I configure like this:

Gpu clock: 1200mhz / 920mv
Gpu memory: 2250mhz / 950mv

And I get 31.2 per card, except one that I am has 2200 in memory.


But with the nitro ca changes nothing at all when I mounts the memory, it will say that my value does not validate. .....

Hello

I moded my bios of my rx 480 reference.

Copy of timmings 1750 to 2000. and mounted memory to 2250.

And I have 31+ mh.




I have a rx 480 nitro.

Of origin I have a hashrate of 24mh,

When I copy the timmings 1750 to 2000, I have 28mh.

But when I then mount the memory to 2250, I stay at 28mh.

Even at 2300mhz, my hasrate does not move much, it remains at 28 mh.

Max 28.4 mh

I do not understand .

Has anyone had this problem?

Hello

These settings does not work on the rx 480 nitro?

Because I have to buy a rx 480 nitro, I modify the timmings in the bios as I did for my rx 480 reference.

I went from 24mh to 28mh.

But then when I mounts the memory has 2200 mhz, nothing moves my nitro remains at 28mh

Normally with a memory of 2250 I have 31+ on my reference card.

Have you had this problem?