Latest posts of: Nickola

Show Posts
Pages: [1]

on: July 17, 2018, 03:08:18 PM

Quote from: patrike on July 16, 2018, 01:40:02 PM Awesome Miner version 5.3.2 - If the current profit of a miner is negative, show the negative value instead of zero in the miner list - Handle a scenario where Antminer Z9 reports invalid data response - New setting to allow setting a pause after a GPU clocking operation has been performed. See Options dialog, Advanced section. - Only apply auto flag for JCE miner if no flag for specifying configuration file is used - Allow the use of Upgrade Remote Agent for a large selection of miners, even if some of the selected miners are not ready for an upgade - Update to SRBminer configuration page to also be available for used defined miners based on SRBminer - Added Equihash 144,5 algorithm in additon to the already supported personalizations of the algorithm - Updated Vertcoin logo - Claymore Ethereum miner 11.9 - SRBminer 1.6.4 - Correction to missing Device Profile command line arguments - Correction to CastXMR algo parameter, to only be added if not manually specified - Minor corrections Hello, patrike ! Thank you, very much!

on: July 11, 2018, 07:32:03 AM

Quote from: patrike on July 10, 2018, 11:58:45 AM Hi. I tried to reproduce the issue by defining a Device Profile where I set "Max Fan Speed" to 66. I referenced this device profile from a Managed Miner that is based on Claymore Ethereum. When I start the mining software, I do see that "-fanmax 66" is being added to the command line. Is there a specific property from the device profile that isn't passed correctly? Are you running with a Managed Miner or Managed Profit Miner? Please let me know as it might be of help in trying to find the specific issue you run into. Hello, patrike! See screenshots below: https://ibb.co/g3eWNT Device Profile Settings https://ibb.co/fW1NU8 Managed Miner Properties https://ibb.co/j9cwp8 Details ver 5.3 https://ibb.co/mqhkhT Details ver 5.2.2 I did not change setup of a profile of the device neither before up-dating nor after up-dating of the program. Therefore a problem definitely not in incorrect values of my parameters. The problem arises only in case of up-dating of the version of the Awesome Miner Remote Agent program installed on the device. In version 5.2.2 everything works, in version 5.3 - does not work. The version of the main Awesome Miner program does not matter.

on: July 10, 2018, 11:26:52 AM

I use Claymore Dual GPU Miner 11.8. In the new Awesome Miner 5.3 version parameters of tuning of video cards from Device Profiles are not inserted into command line arguments of the Claymore Miner program any more!!!! Because of it video cards overheat, lose productivity and glitch. Rollback on Awesome Miner and Awesome Miner Remote Agent to version 5.2.2 solves a problem. Please, correct it!

on: July 24, 2017, 11:11:53 AM

Quote from: z0n0 on July 24, 2017, 09:28:54 AM Any1 running rig with multiple GPUs on old lga775 boards? Every time I plug riser into pcie x16 slot, the system won't start. What could be the reason for that? when pluged only pcie x1 works normal. I tried changing video setting in bios (onboard, pcie...) I have farm on LGA775. i'm using x16 - x16 PCI-E Riser (with external power plug) in first PCI-E x16 slot. PCI-E x1-x16 riser won't work.

on: November 23, 2016, 08:15:03 AM

To Claymore: Yesterday my rig was cracked through management port of Claymore Dual Miner. The rig has an external fixed IP address, than and the hacker used. As a result of cracking in the directory of a miner start.bat on following was changed : Code: EthDcrMiner64.exe - wd 1 - r 1 - gser 2 - epool eu1.nanopool.org:9999 - ewal 0x2303eB2dc0Fa11B3a1B330F80e7D0D360E751c1B/WORKCOMP/my_mail_address@maildomain.com - epsw x - dpool stratum+tcp://dcr.coinmine.pl:2222 - dwal Stromfreser.Stromfresser1 - dpsw jamjam - dcri 40 (my e-mail is changed) After change of start.bat my miner was remotely restarted by the hacker, and several hours it worked for addresses of wallets of this bastard. https://eth.nanopool.org/account/0x2303eB2dc0Fa11B3a1B330F80e7D0D360E751c1B It is possible to exclude somehow this possibility of cracking further? Thanks in advance! So far I replaced a port address with another from default port address... 2 All users: Beware! This discussion of other similar attack of the same hacker: https://bitcointalk.org/index.php?topic=279903.msg16915753#msg16915753

on: November 22, 2016, 01:47:33 PM

Quote from: Claymore on November 22, 2016, 01:34:36 PM 2. It seems font-family: monospace; does not work in <body> tag, did not check it deeply though. 1) <body bgcolor="#808080" style="font-family: monospace;"> or 2) before <body> tag add: <style rel="stylesheet" type="text/css"> body { font-family: monospace; } </style>

on: November 22, 2016, 01:26:05 PM

Quote from: not.you on November 22, 2016, 01:20:31 PM I am having trouble getting my rx 480 rig to work for anything. I have tried multiple crimson drivers (I still suspect a driver problem) but I always get the same result. Claymore's miner crashes as soon as it would normally start hashing, and this is true for both this dual miner and Claymore's ZEC miner. Ethminer will run, but shows zero hashes (this is true for multiple versions of ethminer). I have tried removing and reinstalling 5 different crimson driver versions and it all seems to succeed successfully but I am still getting these same results every time. This PC was running catalyst 15.21 originally with r9 290's and I suspect some artifact from those drivers is sticking around. Before I proceed with an OS reinstall I wonder if anyone has suggestions. I have used DDU between crimson driver versions (although not in safe mode just yet). I am working remotely so can't do DDU in safe mode but I will be going onsite today to try that as my last resort before an OS reinstall. Anyone have a suggestion? (Win 7 x64 if it matters). It can be a problem with the power supply unit. Try to replace the power supply unit with another. I had a similar problem which was solved after replacement of the power supply unit. Before start of a mining the rig worked normally. When a miner program began to work, failures began at once.

on: November 22, 2016, 12:58:36 PM

to Claymore: Bug in EthMan 2.5 - "View miner console" command doesn't work at the first line of the list of miners. Also, please add style element "font-family: monospace;" to tag "<body>" in web-browser console. Sampe output:

Pages: [1]