 Show Posts
|
|
Pages: « 1 2 [3] 4 5 »
|
|
only 5xx cards are involved with voltage issue, all my 4xx cards are downvolted and working fine with latest beta of MSI AB
|
|
|
|
|
hi there
dunno why today my cryptopay virtual card is unusable, did successfully some purchases with it few days ago, but today with paypal it doesn't work, even when i try to buy online with card, the transaction fails
what's going on ?
|
|
|
|
|
any link to donwload this magical bios ? i've some sapphire 380 4gb elpida
thanx
|
|
|
|
sent ticket too for the ridiculous high fees, and no response, i don't expect any answer from them, just switched to cryptopay
cryptopay also charge pretty high fees of 3.5% well i don't know how you got that number, accroding to my experience, when you load a card, the rate is displayed , and it's 1.5% lower than kraken's rate, i use mainly EUR currency i mean it depend to where your btc's comes from, unless there is some hidden fees that i didn't notice, it was my 1st load, will double check next time |
|
|
|
|
sent ticket too for the ridiculous high fees, and no response, i don't expect any answer from them, just switched to cryptopay
|
|
|
|
i've this error very often too Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Blockexpired"}}
i tried evey port available ,i think it's a pool side problem since with other pools it works smoothly for me |
|
|
|
|
Euro working for me rignt now
|
|
|
|
|
problem with darknote gui wallet ? it's stuck at "Connecting to remote darkNoted"
|
|
|
|
anyone can help , aeond still freezing, while xmr or xdn deamon works smoothly i'm using latest version  |
|
|
|
|
thanks to claymore for 6xxx cards support
+50% hashrate confirmed with 6990 now at 747h/s
|
|
|
|
|
hi
@dev, new wallet working perfectly, just synced, thanx
|
|
|
|
well version 4.0 and drivers 14.6 on 6950's seems to be way touchy, driver crash and thread hangs 98% of the time..... will test 4.0 on 13.12 drivers and report results.
asus 280x's 2x achieve 1068H/s at 1190-1800 and stable on 4.0 miner with 13.12 drivers.
x2 7950's achieve 950h/s at 1145-1250 and stable with 4.0 miner with 13.12 drivers.
X2 Gb 280x's with elpida memory do 791 at stock clocks and stable with 4.0 miner and 14.6 drivers. have yet to OC to gain higher results....
Edit*
Asus 6950 runs 90% stable with v3.4 miner with 13.12 drivers. 200H/s at stock clocks, 925-1200 nets 215h/s stable.
x2 GB 280x's do 401H/s each netting 802h/s at 1170-1500, OC'ed. High OC seems to not really be worth it given the small gain's from the much higher clocks... althou its stable for now.
Works fine on a HD 6950 with 2GB of memory, but the 1GB version crashes. Seems like the old cards have to have 2GB memory or more to run proper with the new 4.0 miner. My 5970 with 1gb of memory works fine please post your hashrate with a 5970, also mem/core freq, catalyst version i get 225h/s , 880/1000 , catalyst 13.12 |
|
|
|
|
to devs:
i'm trying to sync my wallet since yesterday, but it get stuck at 3day behind , i closed the daemon properly, lauched it again today, and it still stuck at 3day behind
i think it could help people with syncing issues if you put on the op page a link to download the whole blockchain
regards
|
|
|
|
I have HD 5850.
Hashrate - 140 h/s
But miner stops after 3-4 h. mining and miner proceeds mining after restart.
Drivers not crashed.
HD 5850 jointly with HD 6850.
HD 6850 continues mining.
Why it occurs?
because this miner is clearly not designed for old cards, be happy that it works, and dev has not intention to provide support for those gpu's, it's sad, because, they perform as well as new gen cards on other algo's imho claymore miner use fixed intensity, 5xxx & 6xxx cards don't appreciate it, it's like using -i 21 with a 5xxx card on scrypt mining, hashrate will drop |
|
|
|
|
sent 10000 to bittrex as 1st try, every thing goes fine
after , i sent 1000000, sent successfully according to wallet , but transaction not even present in blockchain
id: 01867236fe73a9703f5b3f8207b63107a53068e159cbbc03b9ec69347e515dd9
|
|
|
|
A couple of comments on this for Claymore:
1) Have you noticed that this miner works better on AMD platforms than on Intel platforms? Maybe there's something else at play, but I have three FX-8320 rigs with 3x280X in each, and they all get around 1350 H/s. Then I have one rig with i5-4670K (which is often a bit faster on mining than the AMD rigs) and it only gets ~1100 H/s. The GPU usage also fluctuates a lot, like from 80% to 95% where the AMD rigs are all pretty consistently at 97-99% load.
2) It seems you've focused pretty much exclusively on performance with GCN cards. Is that because the older 6900 and 5800 series cards suck at the required calculations, or is it just a lack of time/hardware/whatever? My 6970 cards will do 500KH/s on Scrypt, which isn't that far off of the 600KH/s I get with a 7950; X11 hashing is a similar ratio. With the CryptoNote miner I get 200 H/s per 6970 compared to around 350 H/s with 7950. It would be nice to see improved performance on older GPUs like the 6900 series, but I understand if that's not possible.
3) Any chance of a BBR (Keccak Wild) miner, or is that not possible right now?
1. I have only Intel-based rigs and they all show good performance as described in readme. I don't have AMD-based systems. 2. I don't have old cards, also I don't have time for old cards, it would take a lot of time to support two generations instead of one GCN, may be I will do it but later.3. Right now I don't have BBR miner. It takes a lot of time and efforts to create new efficient miner, BBR PoW is completely different from CryptoNote coins. i think and maybe i'm wrong the problem with old cards is just the intensity which is too high, mining cryptonote with those card is too unstable , i've some multi gpu rigs with 5970's , what ever clock ratio/mem i apply, randomly 1 or 2 gpu crash after a while , same thing happens in other algo's when high intensity is set, so gpu stop mining without driver crash so maybe adding the ability to set intensity in future updates will at least give us better results, who knows regards |
|
|
|
|
thanx claymore for your miner, great job
but a better support for 5xxx 6xxx card would be very appreciated, because they just suxx with cryptonote algo, while they are good or excellent in other algos
150 h/s with a 5970
270 h/s with a 6990
regards
|
|
|
|
|
hi guys , i've a small question, been mining xmr for past few days, i saw some people complaining about transactions not showing on blockchain when sending coins to poloniex
how many coins is safe to send at once ?
thanks
|
|
|
|
Je suis reviendu en france   Le DDOS a eu lieu qu'une seul fois. Et les tentative ne marche plus. D'ailleurs elle avait marché principalement a cause de l'explosion de l'espace disque de +15G en 1H alors que je fait 3G par jours de logs. Et effet de bord a péter le wallet car plus d'espace disque pour écrire ( j'avais une backup quelque part ). J'ai compris le problème des payement non reçus. Et pour être honnête j'en porte une part de responsabilité. J'ai bien mit a jours le serveur bitmonerod ( donc changement de frais minimum ) mais pas dans la pool . Normalement les transactions sont dans le wallet bitmonerod faut que je trouve le moyen de les renvoyé enfin quand j'aurai résolu le nous soucis . Et j'en ai un autre plus chiant qui vient de tomber : Le fichier wallet.bin fait 128Mo et ne s'ouvre plus et je veux pas repartir sur un backup pour eviter des perdre les transactions perdu. Je vous tient au courant. salut, j'espere que le probleme va etre vite resolu, j'ai environ 30 xmr qui sont pas arrivés sur mon wallet des que ca sera rentré dans l'ordre , je remet mes 17kh sur le pool bon courage |
|
|
|
|
