Show Posts
|
Pages: [1] 2 3 4 »
|
GPU items sold. ASIC still avail. Make an offer!
|
|
|
Hi all. All equipment is located in south east North Carolina and just taken out of my commercial mine. Note - all numbers of estimates right now! Still is process of cleaning out.
Looking to do a bulk sell if possible! Trying to have this equipment find a good mining home!
GPU Rigs:
24x - MB = ASUS PRIME Z270-A CPU = Intel Celeron G3930 Kaby Lake Dual-Core 2.9 GHz RAM = 8GB DDR4 SDRAM DDR4 2133
32x - 1070 ASUS ROG GeForce GTX 1070 STRIX 8GB 31x - 1060 ASUS ROG GeForce GTX 1060 STRIX 6GB 6x - SAPPHIRE NITRO Radeon RX 470 4GB 8x - SAPPHIRE NITRO+ Radeon RX 580 8GB 40x - XFX Radeon RX 580 8GB 44x - EVGA GeForce GTX 1070 8GB 4x - ZOTAC GeForce GTX 1070 8GB 15x - ASUS GeForce GTX 1060 6GB 1x - ASUS 1070 1x - Gigabyte 1070 14x - assorted 580 & 570
Box of risers
ASICs:
24x - S9 13.5 14x = L3+ All w/ Bitmain PSU
Power: 12x - 2400 Watt GPU Mining Power Supply w/ Breakout Board Lots of GPU power cords 8x - Dell AP6037 200-240VAC Assorted power cords
|
|
|
dude, the evidence as said is that the sum of "accepted" blocks of the two DevFee workers reported in miner status page, was in some case nearly half of my main worker URL! Some other miners reported "just" 20-25% of DevFee blocks...
Hey esol. Similar to the other board member here, I am not seeing the same issues on my test miner as you are. The disconnects on the pool db you showed are very strange. Not sure what else to say! Would be curious to see your settings you used... I have been an awesome miner user for many years now and have no reason to think anything shady is going on here.
|
|
|
well, I've istalled the AweMiner firmware n 7 S9, it is based to one of the many DevFee hacks already seen; it is clearly developed in Russia, and the big surprise is that DevFee id MUCH MORE than 2%, it can reach up to 40-50% as shown by "accepted" counter in miner stats page and by global severe decline of total hash rate reported by the mining pool.
Some workers often hang as shown by SushPool chart, Fee workers are set to mine on SlushPool too. a total SCAM legitimated by Awesome Miner that make me suspect also of their monitor App.
Shame AM, tay away!
Hi esol. To be honest, not sure where/how you are getting this info. Please provide more details when you are insinuating things like this! I'm not saying this is the best FW by any means, but I have not seen the same results you all out above. I have installed this FW on only a single miner and have been watching the stats pretty closely. And seems to be working as advertised. I open to be convinced otherwise though
|
|
|
AM firmware is just VNISH firmware with custom skin and decent integration with AM. IF you have a large farm it can come handy to control everything from AM.
I do agree that if you use AM the firmware should be at least with a very low dev fee.
As for the firmware, if you manually tweak S9 best i could achieve was 13.8 ths/1150W which is not bad regarding th/w.
What settings did you use to achieve this result? Been playing around with diff auto-tune settings, but haven't been able to get my W/Th that low. Thanks!!
|
|
|
Yea I'm aware of downlocking V, but I've now gone from ~330 TH to ~305 and seems to be going lower by the hour! That's almost 10% hashrate loss!
|
|
|
Hi all. Had success at first with this firmware, but my total hashrate has slowly dropped day-over-day...
In total I've gone from ~330 to ~310 as reported by Slush. Anyone else seeing this???
|
|
|
Do these come with a power adapter as well? I know the ones directly from Canaan do not. Just wondering.
Sorry for delay in responding! No, this is NIB item from vendor, so as you stated, does not have a power adapter. Thanks!
|
|
|
Have 1 extra new in box Avalon Controller. Jan 2018 order from Blokforge.
Paid 129.00. Not going to upcharge at all. Located in NC, USA. Pics available through PM request.
|
|
|
What the hell is going on with bitcoin cash? A lot of smoke and mirrors to pull that off. Just a mirage though.
Agreed. Roger V & others are promoting their a$$ off and Bitmain is laughing their recent BCH-only sales right to the bank. It's been very funny seeing the articles written in the mainstream media about "BTC slump & BCH rally" with almost no real WHYS being answered besides 2x being called off = there are none! Also, very interesting to see the BCH trade volume is ~37% coming from Korea. Pump n dump coming sooooon
|
|
|
New batch of 13.5 S9s just posted by Bitmain... only BCH again though. BOOOOO! Was hoping for a USD batch to get a late arriving Christmas present
|
|
|
And hereeee come the site response issues... now cannot refresh at all
|
|
|
D3 just posted. No L3+ yet
|
|
|
Same here... had the 6 I wanted to fill my mine in cart and couldn't get to confirm page. After 20x tries.... sold out! DAMNIT
|
|
|
PM sent!
|
|
|
Hey jstef. Just got 13 of these from Holy the other day and, first off, they look great. With that said, having mixed success thus far... working on getting them installed and only 1 of 3 are allowing Windows to recognize the attached GPU. FYI, I have confirmed the riser itself is working by unplugging from your m2 and plugging directly into motherboard (Windows recognizes then).
Motherboard = ASUS Prime Z270-A
All other hardward & bios settings are the same. Any ideas what I can try? Thx!!!
|
|
|
|