 Show Posts
|
|
Pages: [1] 2 3 »
|
what cards, amd rx cards and driver 19.4.1.. what u mean its not working?
i got 0sol/s on r9 280x , my driver is 18.6.1 but i try on lolminer 0.6 it work well , maybe on new lolminer not support GCN 1 ? |
|
|
|
mine is working fine on Aion, with v0.81, win 10 @aionmine.org
what card and what driver? |
|
|
|
Hi,
Grin 31 is working on my rx vega cards, however it doesn't seem to be working on my gtx 1080 cards. On the rx vega it uses the 8gb kernel but on the 1080 it uses the 4gb kernel. It shows hashrate of 0 and continues to run without errors. Is this normal?
edit: should have mentioned i'm running windows 10
same on AION mining , windows 10 or wind 7 on amd card. need solution |
|
|
|
Why 0.7 alpha4 still not announced?
It is on github only, but no link or even mention from Lolliedieb...
It's not stable? What version it's better to use?
idk but not stable for me, 5x rx580 rig and 5x rx470 rig normal for a moment ,then 0sols for couple hours later. if i close miner it keep crashing. rx 460 too this not safe for rx series but normal on vega,r9 , and gtx 1060 |
|
|
|
Trying to mine Beam using newest version with an AMD rig. When miner starts it begins to detect each GPU but windows immediately closes the miner after the second card is detected. It doesn't give me an error, just closes the miner. How can I remedy this?
I've also tried the pause command, but still don't get an error listed.
I tried the windows cmd prompt to no avail.
I have windows defender permanently disabled but its as if it still stops the miner through windows smartscreen. I have everything defender disabled but it continue to close the miner.
Any help would be appreciated.
moded bios? go to amd manager >gaming > global setting > overdrive > reset its work for me |
|
|
|
getting opencl error on 1060 3g
windows 10? u can try windows 7. windows 10 using morethan 3gb memori |
|
|
|
|
not working for 1060 3gb
i tried on win10 , driver nvidia 399
|
|
|
|
|
minimum memory 4gb? can u make it to 3gb please?
like to opencl miner, it has minimum 3gb
|
|
|
|
onlolminer 0.6 alpha 4 , 4gpu or more becomes more of a incorect share 6 gpu =  5 gpu =  3 gpu =  2 gpu =  any solution? |
|
|
|
cant wait for 210,9 (aion) improvement  |
|
|
|
|
is this ok to have stale share like this?
-------------------------STATS-------------------------
Miner version: 1.6.8
Driver version: 24.20.11021.1000
Mining time: 1 days, 15 hours, 44 minutes, 39 seconds
Algo: normalv8
Pool: asia.cryptonight-hub.miningpoolhub.com:20580
Connected since: 2018-10-21 18:00:25
Pool Difficulty: 60020
Pool latency: ~174 ms
Last job received: 26 seconds ago
Accepted(Stale)/Total shares: 7819(587)/7819 (100.0%)
Average time to find share: 18 seconds
1 min. average speed: 2771 H/s
5 min. average speed: 2768 H/s
30 min. average speed: 2770 H/s
Max. speed: 2781 H/s
|
|
|
|
|
hi dev,
can u tell me how to auto restart miner in the line start.bat after crashed?
|
|
|
|
did have a minus difficulty is a problen in this miner? btw I've been mining MINEXCOIN for 3 days I often get minus difficult and directly decreases my hashrate on my pool like this http://prntscr.com/kb8rhx and this http://prntscr.com/kb8ryfi have 4rig AMD using 0.4 LOLMINER and 1 rig NVIDIA card using EWBF each AMD rig got 65 kh/s on LOLMINER but got average 40khs - 50khs on pool chart each NVIDIA rig got 40khs on EWBF and got stable 39khs - 41khs on pool chart you can see this pic http://prntscr.com/kb8uslis dev know about this? love this miner because light to windows, but this miner need more attention and upgrade from developer |
|
|
|
|
hang freeze on windows version on tahiti card, i've tried on wind 7 64bit and wind 10 64bit.
hoping fixed on new update
|
|
|
|
Win7 + drivers 15.12 (!!!)
3*7950
average speed ~30 sol/s (10 per card @ stock clocks, mem striped)
On 2 other systems which are almost identical it doesn't work
One is with same 15.12, the other with blockchain drivers from 27.07.2017, both Win7 with 4 * 7950s
Is adding parameters to control intensity/memory usage possible? Or more detailed debug info.
not working http://prntscr.com/k4dohlhashing but still negative difficulty |
|
|
|
Win7 + drivers 15.12 (!!!)
3*7950
average speed ~30 sol/s (10 per card @ stock clocks, mem striped)
On 2 other systems which are almost identical it doesn't work
One is with same 15.12, the other with blockchain drivers from 27.07.2017, both Win7 with 4 * 7950s
Is adding parameters to control intensity/memory usage possible? Or more detailed debug info.
work on drivers 15.12? adrenalin driver n blockchain driver not working so far, thanks mate, ill try it what coin are u mine? |
|
|
|
I just updated the download links, because some were not able to load the miner. Working heavily on new code, but I am only one person with dayjob and family beside, so it takes some time - but new (faster) code will come  only this miner support amd card.. amd user will wait , dont forget about tahiti , thank u |
|
|
|
|
we got minus difficulty on the pool on tahiti card and high abnormal hashrate, like 90s/s per card
this miner ok for other amd card? or just not ok for tahiti ?
|
|
|
|
accepted share but 0s/s on pool 
|
|
|
|
|
same here, r9 280x tahiti got "invalid share" , "share not accepted" , and no share at low diff at suprnova..
|
|
|
|
|
