May I know pls how much tokens were sold at the pre-ICO? - If that's allowed to disclose.

Hi,

I'am facing a problem and don't know how to approach it correctly.
I'am running simplemining with 6 x XFX RX470 8GB Hynix, there are two thing happening:

1. After about 10 minutes of mining, hashrate of GPU3 goes down from 28mh/s to about 22.. 20mh/s and stays there, after some time eventually it will crash with
the following message in dmesg:
[ 1084.587016] amdgpu 0000:07:00.0: GPU fault detected: 147 0x05708801
[ 1084.587016] amdgpu 0000:07:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00E0983C
[ 1084.587016] amdgpu 0000:07:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x06088002

Lots of those messages.

2. Sometimes all GPU's hashrate drops to about 10mh/s and the CPU usage goes to 100% ( claymore process ), again, the same error appears into dmesg (the gpu fault).

Now, I did shut off GPU3 and identify the card that cooled down, the problem is that the dmesg errors are for PCI ID 03 not for PCI ID 04 ( card that drops in hashrate ), here is my lspci:

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
05:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
06:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0


Now, I believe claymore see GPU in order, right ? I mean, GPU0 is 01:00, GPU2 is 02:00, etc... is this correct ?
Because the card that is dropping in hashrate is GPU3 but the error in dmesg are for PCI ID: 03:00, which should be for GPU2 in claymore ( GPU0, 1, 2-- 3rd card ).

So, what card is faulty ? The one that drops in hashrate or the one that id refereed by dmesg error ?

Has anyone else encountered this type of problem ?

Thanks!

-T I think is for text mode

you can omit this if you want but smos may not be able to format the console properly

if your miner is still crashing then most likely its your OC settings

reset them to stock by putting "0" / "zero" in me core and mem field and 800 or 900 undervoltage

you can use the recently added Gateless Gate miner.

AMD cards are very poor in Neoscrypt - you get better results with NVIDIA.

Anyways you can try this below - worked for my 470/480, no need tip

--kernel neoscrypt -o stratum+tcp://neoscrypt.hk.nicehash.com:3341 -u <btc-address>.$rigName -p x -T