Latest posts of: T3ch92

Show Posts
Pages: [1]

Bitcoin / Hardware / Re: DragonMint T1 16TH/S halongmining.com

on: January 16, 2022, 09:21:21 PM

Quote from: D4rkS0u1 on September 16, 2021, 10:33:09 PM Quote from: HagssFIN on August 29, 2021, 05:22:44 PM @SharkyX You could try Braiins OS with your own responsibility. I think version 2019-06-05-0 is the latest one with support for T1, the later versions have dropped out the T1 support. https://github.com/braiins/braiins/blob/firmware_2020-06-16-0-d3608188-20.06/braiins-os/whatsnew.md#2019-06-05-0 Is there any guide how to install Braiins on T1? Thanks Yes, I made one here: https://bitcointalk.org/index.php?topic=2443327.msg55525315#msg55525315

Alternate cryptocurrencies / Mining (Altcoins) / Re: Innosilicon A4+ setup tutorial

on: July 11, 2021, 08:49:50 PM

Quote from: slarco on July 06, 2021, 06:46:40 PM

Quote from: T3ch92 on July 05, 2021, 06:43:57 PM

Quote from: slarco on July 03, 2021, 02:46:26 PM

Does anyone have any idea what this problem might be? After power on 3 of the hashboards we´re going down in hashing power now they jump back and forth from dead to alive status with 0 H/s hash

Code:

Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain0: ERROR - failed to recv spi data
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chip clear work false
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain2: ERROR - failed to recv spi data
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chip clear work false
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain3: ERROR - failed to recv spi data
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chip clear work false
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain3: ERROR - failed to recv spi data
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain3: RESET failed
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain3: power down
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain2: ERROR - failed to recv spi data
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain2: RESET failed
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain2: power down
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain0: ERROR - failed to recv spi data
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain0: RESET failed
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain0: power down
Jul 02 23:03:55 InnoMiner dm-monitor[1316]: ## Error: "watchdog" not defined
Jul 02 23:03:56 InnoMiner nginx[1340]: 127.0.0.1 - - [02/Jul/2021:23:03:56 +0000] "POST /api/auth HTTP/1.1" 200 208 "-" "curl/7.59.0"
Jul 02 23:03:56 InnoMiner mcompat_lib[1329]: chain3: set vid 0
Jul 02 23:03:56 InnoMiner mcompat_lib[1329]: chain3: sleep(6)
Jul 02 23:03:56 InnoMiner mcompat_lib[1329]: chain2: set vid 0
Jul 02 23:03:56 InnoMiner mcompat_lib[1329]: chain2: sleep(6)
Jul 02 23:03:56 InnoMiner mcompat_lib[1329]: chain0: set vid 0
Jul 02 23:03:56 InnoMiner mcompat_lib[1329]: chain0: sleep(6)
Jul 02 23:03:57 InnoMiner mcompat_lib[1329]: API: access denied to '192.168.1.15' for 'privileged' command
Jul 02 23:03:57 InnoMiner mcompat_lib[1329]: BA1 1: invalid nonce - HW error
Jul 02 23:03:57 InnoMiner mcompat_lib[1329]: 1: chip 68: invalid nonce 0xf8627900 !
Jul 02 23:03:58 InnoMiner mcompat_lib[1329]: BA1 1: invalid nonce - HW error
Jul 02 23:03:58 InnoMiner mcompat_lib[1329]: 1: chip 48: invalid nonce 0xad6f8700 !
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: BA1 1: invalid nonce - HW error
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: 1: chip 25: invalid nonce 0x8e9ff200 !
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: BA1 1: invalid nonce - HW error
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: 1: chip 46: invalid nonce 0xfebaf400 !
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: BA1 0: Idle for more than 60 seconds, declaring SICK!
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: BA1 0: Attempting to restart
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: BA1 1: invalid nonce - HW error
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: 1: chip 67: invalid nonce 0x8a610601 !
Jul 02 23:04:02 InnoMiner mcompat_lib[1329]: BA1 1: invalid nonce - HW error
Jul 02 23:04:02 InnoMiner mcompat_lib[1329]: 1: chip 47: invalid nonce 0x16381e01 !
Jul 02 23:04:02 InnoMiner mcompat_lib[1329]: chain3: encore fourth mode
Jul 02 23:04:02 InnoMiner mcompat_lib[1329]: chain2: encore fourth mode
Jul 02 23:04:02 InnoMiner mcompat_lib[1329]: chain0: encore fourth mode
Jul 02 23:04:02 InnoMiner mcompat_lib[1329]: API: access denied to '192.168.1.15' for 'privileged' command
Jul 02 23:04:03 InnoMiner mcompat_lib[1329]: recieve notify,we must flush work
Jul 02 23:04:03 InnoMiner mcompat_lib[1329]: New block: 39377ed685d70d9159c5262cc93cfc2ccd34a1313a1da9d2174680fe919c7d74... diff 6.84M

Fan speed can be adjusted in telnet with vi.
Did you figure it out?

When I had same problem with hashboard, I just needed to flash new firmware.

Firmware "update_180622.bin" worked for me :-)
But you could also try "update_180129.bin"

Where can i get those firmwares? I was looking for older version but with no luck.

Also the .bin file available on Inno downloads section. How can i upload it to the minner? Trough the miner status i can only upload SWU files, does not accept a BIN file

And one more thing if you dont mind...Don´t know how to telnet and adjudt fan speeed. Still showing 10% fan speed.

Thank yu¿ou in advance... =)

You have the wrong firmware if you only can flash SWU file...
Think you need to flash back with SD card.
You can read more here:
https://www.innosilicon.com/html/support_en/download.html
Click on "Innosilicon A4+ Miner"

The bin firmwares:
www.innosilicon.com.cn/download/update_180129.bin
www.innosilicon.com.cn/download/update_180622.bin

To telnet, you need to type in terminal:
telnet "miner-ip" 8100
example:
telnet 192.168.1.10 8100

username: root
password: t1t2t3a5

then type:
vi /innocnfg/www/conf/miner.conf

There you can change fanspeed with vi editor.
- press "i" to enable edit mode
- change speed
- presss "esc" then ":wq" to save the changes

Not sure if telnet password is the same on the SWU firmware, so you may need to brute force with hydra or something, if you dont flash back to bin firmware.
t1t2t3a5 is the password after 22nd Dec Firmware, innot1t2 is the oldest.

Many of the miners I got from people, because they did not work got "fixed" after flashing back to "update_180129.bin" & "update_180622.bin"

Hope this helped!

Alternate cryptocurrencies / Mining (Altcoins) / Re: Innosilicon A4+ setup tutorial

on: July 05, 2021, 06:43:57 PM

Quote from: slarco on July 03, 2021, 02:46:26 PM

Does anyone have any idea what this problem might be? After power on 3 of the hashboards we´re going down in hashing power now they jump back and forth from dead to alive status with 0 H/s hash

Code:

Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain0: ERROR - failed to recv spi data
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chip clear work false
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain2: ERROR - failed to recv spi data
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chip clear work false
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain3: ERROR - failed to recv spi data
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chip clear work false
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain3: ERROR - failed to recv spi data
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain3: RESET failed
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain3: power down
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain2: ERROR - failed to recv spi data
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain2: RESET failed
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain2: power down
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain0: ERROR - failed to recv spi data
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain0: RESET failed
Jul 02 23:03:54 InnoMiner mcompat_lib[1329]: chain0: power down
Jul 02 23:03:55 InnoMiner dm-monitor[1316]: ## Error: "watchdog" not defined
Jul 02 23:03:56 InnoMiner nginx[1340]: 127.0.0.1 - - [02/Jul/2021:23:03:56 +0000] "POST /api/auth HTTP/1.1" 200 208 "-" "curl/7.59.0"
Jul 02 23:03:56 InnoMiner mcompat_lib[1329]: chain3: set vid 0
Jul 02 23:03:56 InnoMiner mcompat_lib[1329]: chain3: sleep(6)
Jul 02 23:03:56 InnoMiner mcompat_lib[1329]: chain2: set vid 0
Jul 02 23:03:56 InnoMiner mcompat_lib[1329]: chain2: sleep(6)
Jul 02 23:03:56 InnoMiner mcompat_lib[1329]: chain0: set vid 0
Jul 02 23:03:56 InnoMiner mcompat_lib[1329]: chain0: sleep(6)
Jul 02 23:03:57 InnoMiner mcompat_lib[1329]: API: access denied to '192.168.1.15' for 'privileged' command
Jul 02 23:03:57 InnoMiner mcompat_lib[1329]: BA1 1: invalid nonce - HW error
Jul 02 23:03:57 InnoMiner mcompat_lib[1329]: 1: chip 68: invalid nonce 0xf8627900 !
Jul 02 23:03:58 InnoMiner mcompat_lib[1329]: BA1 1: invalid nonce - HW error
Jul 02 23:03:58 InnoMiner mcompat_lib[1329]: 1: chip 48: invalid nonce 0xad6f8700 !
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: BA1 1: invalid nonce - HW error
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: 1: chip 25: invalid nonce 0x8e9ff200 !
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: BA1 1: invalid nonce - HW error
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: 1: chip 46: invalid nonce 0xfebaf400 !
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: BA1 0: Idle for more than 60 seconds, declaring SICK!
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: BA1 0: Attempting to restart
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: BA1 1: invalid nonce - HW error
Jul 02 23:04:01 InnoMiner mcompat_lib[1329]: 1: chip 67: invalid nonce 0x8a610601 !
Jul 02 23:04:02 InnoMiner mcompat_lib[1329]: BA1 1: invalid nonce - HW error
Jul 02 23:04:02 InnoMiner mcompat_lib[1329]: 1: chip 47: invalid nonce 0x16381e01 !
Jul 02 23:04:02 InnoMiner mcompat_lib[1329]: chain3: encore fourth mode
Jul 02 23:04:02 InnoMiner mcompat_lib[1329]: chain2: encore fourth mode
Jul 02 23:04:02 InnoMiner mcompat_lib[1329]: chain0: encore fourth mode
Jul 02 23:04:02 InnoMiner mcompat_lib[1329]: API: access denied to '192.168.1.15' for 'privileged' command
Jul 02 23:04:03 InnoMiner mcompat_lib[1329]: recieve notify,we must flush work
Jul 02 23:04:03 InnoMiner mcompat_lib[1329]: New block: 39377ed685d70d9159c5262cc93cfc2ccd34a1313a1da9d2174680fe919c7d74... diff 6.84M

Alternate cryptocurrencies / Mining (Altcoins) / Re: Innosilicon A4+ setup tutorial

on: June 02, 2021, 10:47:27 PM

Quote from: mishut on April 28, 2021, 09:09:41 PM Quote from: T3ch92 on November 12, 2020, 01:20:51 PM It worked to telnet and vi innocfg/www/conf/miner.conf And change freq from 1044 to 600, so now I can try diff settings, and see if I can get som quiet home solo miners When freq was 600, fan was in auto and did 30%. Will try to get it down to 10% Dont know if anyone else here want quiet solo miners, but this is a cheaper way to do it then buying a Apollo miner for $350 or something like that. Where I am, A4+ goes for $50. Hi! What firmware do you have? What is your hashrate on that 600MHz? And what about power usage? Im very interested! I have two L3+@BlissZ on 312MHz@405MHs@550W and now want to make that same thing with A4+. Im curious about about W/MHs Hi, On the A4+ I use factory firmware, that I tune using telnet. You could tune L3+ also, or use custom firmware. DM if you want more info :-)

Alternate cryptocurrencies / Mining (Altcoins) / Re: Innosilicon A4+ setup tutorial

on: November 12, 2020, 01:20:51 PM

It worked to telnet and vi innocfg/www/conf/miner.conf And change freq from 1044 to 600, so now I can try diff settings, and see if I can get som quiet home solo miners When freq was 600, fan was in auto and did 30%. Will try to get it down to 10% Dont know if anyone else here want quiet solo miners, but this is a cheaper way to do it then buying a Apollo miner for $350 or something like that. Where I am, A4+ goes for $50.

Alternate cryptocurrencies / Mining (Altcoins) / Re: Innosilicon A4+ setup tutorial

on: November 11, 2020, 10:40:47 PM

Hi, Got some A4+ and I want to change freq. Anyone know if this work? Telnet into miner. cd innocfg/www/conf vi miner.conf And change freq there from 1044 to 522? Would be fun to know if underclocking work on A4+, with original firmware, or I need to make custom. If anyone know a simple way to underclock, please reply Regards

Bitcoin / Hardware / Re: DragonMint T1 16TH/S halongmining.com

on: November 05, 2020, 01:17:51 PM

I bought some cheap Dragonmint T1 w/ G19 controll boards. Wanted to try Braiins on them, since I have it on my other miners. Please note, that if anything wrong happens, Dragonmint dont have SD card to help. Use this guide at own risk!!! Something can happen under installation like power failure, internet failure osv that can make the install fail. Used ssh from Linux. SSH root:dr4g0nhash Web is admin:dragonadmin If you want to install Braiins use thise comands from a new folder. #Update the repositories and install dependencies $ sudo apt update && sudo apt install python3 python3-virtualenv virtualenv #Download and extract the firmware package #Dragonmint $ wget -c https://feeds.braiins-os.org/19.06/braiins-os_dm1-g29_ssh_2019-06-05-0-0de55997.tar.gz -O - \| tar -xz #Change the directory to the unpacked firmware folder $ cd ./braiins-os_dm1-g29_ssh_2019-06-05-0-0de55997 #Create a virtual environment and activate it $ virtualenv --python=/usr/bin/python3 .env && source .env/bin/activate #Install the required Python packages $ python3 -m pip install -r requirements.txt Install Braiins OS using SSH package #Change the directory to the unpacked firmware folder (if not already in the firmware folder) $ cd ./braiins-os_dm1-g29_ssh_2019-06-05-0-0de55997 #Activate the virtual environment (if it is not already activated) $ source .env/bin/activate #Run the script to install Braiins OS $ python3 upgrade2bos.py IP_ADDRESS (Change "IP_ADDRESS" to miners IP adress) Done BTC If you want to go back to original firmware: #Using previously created backup to flash back to original firmware if you dont want to use Braiins $ cd braiins-os_dm1-g29_ssh_2019-06-05-0-0de55997 && source .env/bin/activate $ python3 restore2factory.py backup/NAME_OF_BACKUP_FOLDER/ IP_ADDRESS #Comand you use if you want to backup $ python3 restore2factory.py backup/BACKUP_ID_DATE/ IP_ADDRESS)---- SSH root:dr4g0nhash Web is admin:dragonadmin Github guide: https://github.com/KoreNBeatZ/braiins-os/blob/master/docs/index.md Please note, that if anything wrong happens, Dragonmint dont have SD card to help. Use this guide at own risk!!! Something can happen under installation like power failure, internet failure osv that can make the install fail.

Economy / Collectibles / Re: 🌟CLOSING SALE🌟 [DENARIUM] | Next Gen Physical Bitcoins 🌟CLOSING SOON🌟

on: August 04, 2020, 12:04:50 PM

Think I got the 2 last coins on the last day Thank you! Got the coins in the mail, and they look good! Sorry to see you close, was fun to buy your physical coins.

Alternate cryptocurrencies / Pools (Altcoins) / Re: 💡 SOLO and PPLNS 🚀 [BTC][BCH][BSV][DGB] Bitcoin, Digibyte pools - USA, EU, SG

on: May 14, 2020, 05:52:42 PM

Thank you Have some hashpower on BTC and LTC solo pool. Have you considered dogecoin merged mining on LTC solo pool? Regards TechH

Alternate cryptocurrencies / Pools (Altcoins) / Re: 💡 SOLO and PPLNS 🚀 [BTC][BCH][BSV][DGB] Bitcoin, Digibyte pools - USA, EU, SG

on: May 13, 2020, 01:44:54 AM

Very nice solo pool! Hope its ok that i recoment this to other that want to solo/lotto mine Bitcoin and altcoins

Bitcoin / Hardware / Re: Announcing GekkoScience's new USB stick miner, the aptly-named NewPac

on: November 09, 2018, 11:28:38 PM

Got my NewPac in the mail today Running it along with 5 other 2pac, on Sipolar 10 Port USB 2.0 Hub 5V 20 Amp. https://www.eyeboot.com/sipolar-10-port-usb-hub.html cgminer 4.11.1 works great! BTC solo.ckpool BTC

Bitcoin / Hardware / Re: Announcing GekkoScience's new USB stick miner, the aptly-named NewPac

on: November 05, 2018, 10:33:29 PM

I ordered from https://asicpuppy.com CrazyGuy gave me USPS tracking No need to worry when ordering from CrazyGuy

Bitcoin / Hardware / Re: Announcing GekkoScience's new USB stick miner, the aptly-named NewPac

on: October 29, 2018, 02:45:10 AM

Just ordered one:) Thank you CrazyGuy

Bitcoin / Hardware / Re: Announcing GekkoScience's new USB stick miner, the aptly-named NewPac

on: October 27, 2018, 03:20:43 AM

Would love to buy some But I can not get an account registered on Asicpuppy for some reason... Or add to cart. CrazyGuy, can you help? And do you ship to Skandinavia/Europe?

Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] FutureBit Project Apollo: Bringing ASIC Mining Back to the Home Miner!

on: September 04, 2018, 10:11:24 PM

Order confirmed, thank you

Pages: [1]