|
24
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: [AMD] New AMD RX Graphics Cards of 2019 - RX 5700 / XT, RX 600
|
on: July 24, 2019, 01:45:11 PM
|
My kilowatt wall meter said around 150w or 170w stock. I'm not too good at undervolting so I used the wattman auto undervolt template to get to 150w. doesn't seem to effect the hashrate too bad.
the memory clock can be increased to raise the hashrate to 1750h/s but the watts gets around to 230w at that point
Use the Afterburner instead, enable voltage control and you can start to play with undervolting and OC. Are you sure that you adjusted only memory clocks? Higher memory clocks will need some extra power, but definitely not 80W more... |
|
|
|
|
29
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: AMD Radeon RX 590 Mining Info 💲⛏ (PBE bios mod✅)
|
on: July 21, 2019, 11:43:57 AM
|
is it possible to have a rig with R580 and RX 590? does it work under the same miner?
Yes, it works like a charm. Just install the latest Adrenaline drivers. Yes it works,it is the same as having a rig with Nvidia and ATI cards but keep in mind that the best performance of a mining rig is always when you use the same version of Gpu with the same driver so you minimize drivers conflicts this way.
That is completely different case... |
|
|
|
|
33
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: [AMD] New AMD RX Graphics Cards of 2019 - RX 5700 / XT, RX 600
|
on: July 14, 2019, 06:50:17 AM
|
PCI-E 4 isn't compatible with current GPU risers. Some people have been able to mess with BIOS and get them working by changing them to pcie 3.0 speeds, but not all mobos work like this. So plug the GPUs directly into the mobo 16x Slot to utilize it and even then you wont see any mining improvements.
PCI-E are backward compatible so you can run cards even on 1.1. Which lot of miners did on older mobos to get 6 and more cards running back then. Every mining mobo and most of the newer mobos have option to set PCI-E version. |
|
|
|
|
39
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: [GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏
|
on: June 27, 2019, 09:24:50 AM
|
Hello, it´s time for me to buy some perfect modded bios in yor shop. sometime ago i saw some special mod for 30$ for eg. saphire 470 (nitro, mining, 4gb, 8Gb...) now i can "only"  find the ones for 5$ - i missed something  and second: one of my friend uses the last Claymore ETH and 19..... AMD driver, Stock Bios and 31.5 Hash for 470 Sap. Nitro 8Gb- what do you think is best to do now for me with these cards ? your modded bios plus... some people get 33, 34 and more hash Best regards All 5 USD and 30 USD are still there, none of them were deleted and no price change. You can use both modded bios and Claymore tweaks. I don't use Claymore, but as far as I know the timings changes Claymore provides didn't make much difference for bios made with PBE 3 Pro, but it is probably different for each card and memory type. If you want to buy modded bios for 30 USD you better buy PBE 3 Pro, with the discount coupon posted few posts up you can buy it for almost same price and you can mod how many bios you want. If you have any further questions about mining-bios.eu shop or PBE 3 Pro feel free to send me an e-mail. If you can get almost 32MH/s with Claymore and stable it's not worth paying anything... PBE 3 Pro and older versions was always meant for easy and very fast bios modding, it still need some fine tuning (clocks, voltages) anyway. With Eliovp tool you can also fine tune the timings to be even better if you know how. Yeah that's cause Bios mods are a lot less valuable now that Eliovp has open sourced his powerplay tables mod that changes memory timings on the fly. And then claymore went ahead and incorporated them into his miners too.
No price changes. You can use both modded bios and memory tweaker to get better results. |
|
|
|
|
Show Posts
