 Show Posts
|
|
Pages: [1] 2 3 »
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some invalid shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig.
But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'.
14.6 gives some invalid shares, 12 is not.
Can you check what is problem and fix it.
I fixxed it giving more core Voltage, i bet you UV is too much. Also try -asm 2 I'm not going to rise voltage. But I will try -esm 2. thanks |
|
|
|
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some incorrect shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig.
But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'.
14.6 gives some incorrect shares, 12 is not.
Can you check what is problem and fix it.
|
|
|
|
|
XDNA changed to HEX algo. What about Claymore update?
|
|
|
|
Keccak or Blake2s has lower power consuption in dual mine? Please advise
Blake2s |
|
|
|
Hey guys just wanted to check if anyone is mining with 1080s. I have 2 x 1080s in my set-up and they both average about 21 mh/s on the claymore miner...this seems 4-5 mh/s too slow or is that just me?
Those cards should get 30 to 32 mh/s each, easy. Obviously you don't have your system or cards configured correctly. 1080 gives 21 mh\s on ETH. TI gives 32 + up to 38 depending on card. |
|
|
|
Just ran a 12 hour experiment on the exact same 1060 rigs.
Average shares per hour:
Claymore 11.4: 152
Phoenix 2.6: 174
Extrapolated over the month, Phoenix provides 0.08 more ETH over Claymore.
2.7c crashes every so often for me, and just yesterday my virus program deleted the executable so I've gone back to 2.6.
0.08 it's about - 56 USD now Dual with XVG gives me 500+USD extra per month. Even including all this fees from claymore. So this miner is useless before dual will be added. Come on.. how much xvg can one 1060 mine per month? I'm not on 1060. i'm from Red Army. Depending on card, each gives from 1300 to 1600 Mh\s. Without any impact on ETH speed. So for all who use RX in rigs, this miner is useless. |
|
|
|
Just ran a 12 hour experiment on the exact same 1060 rigs.
Average shares per hour:
Claymore 11.4: 152
Phoenix 2.6: 174
Extrapolated over the month, Phoenix provides 0.08 more ETH over Claymore.
2.7c crashes every so often for me, and just yesterday my virus program deleted the executable so I've gone back to 2.6.
0.08 it's about - 56 USD now Dual with XVG gives me 500+USD extra per month. Even including all this fees from claymore. So this miner is useless before dual will be added. |
|
|
|
In 24 hours I'm getting 0 rejected eth shares and about 22 incorrect per card. 30 rejected decred per card. 0 memory errors. On 11.3. Is this acceptable?
yes |
|
|
|
|
What about dual mining? A you going to add second coin?
|
|
|
|
2 Claymore.
After i start to use 11.2 version, i got amdocl64.dll crashes.
Any clues?
I posted this question early, but no answers for serious question as usual. But i solved this issue. If anyone have same error you need to do: 1. Increase amount of ram at you rig (if you have 2gb make it at least 4gb) 2. Increase swap file 32-64 gb (or more if you have large rig). 3. GPU_FORCE_64BIT_PTR 0 set to 1 4. Copy atiadlxx.dll to folder where claymore miner For me it was 3 and 4. All my rigs have at least 8gb of ram and huge swap. What does setting 1 do? I have 0. I got 65gb swap and 4gb ram. 13 amd radeon 570 8gb. It enable 64 bit address space. 4Gb of ram for 13 cards with 8gb on board is to small. All my rigs above 10 cards have 16 gb of ram and 64-90gb of swap. |
|
|
|
2 Claymore.
After i start to use 11.2 version, i got amdocl64.dll crashes.
Any clues?
I posted this question early, but no answers for serious question as usual. But i solved this issue. If anyone have same error you need to do: 1. Increase amount of ram at you rig (if you have 2gb make it at least 4gb) 2. Increase swap file 32-64 gb (or more if you have large rig). 3. GPU_FORCE_64BIT_PTR 0 set to 1 4. Copy atiadlxx.dll to folder where claymore miner For me it was 3 and 4. All my rigs have at least 8gb of ram and huge swap. |
|
|
|
My 570 8gb nitro got this kind of error..
OpenCL error -4 - cannot write buffer for DAG
even I change my Vram to 17500-25500
Is anyone of you have the solution for this? I already also the riser, cable etc but I always got this message continuously..
Set swap file size 32-64 gb |
|
|
|
|
2 Claymore.
After i start to use 11.2 version, i got amdocl64.dll crashes.
Any clues?
|
|
|
|
2 mine_phun
What about "orphan" blocks?
There is a topic about Orphan blocks already on this forum. https://bitcointalk.org/index.php?topic=940943.0The conclusion comes down to: low difficulties ( Like with XVG coin ) + Big hashrates = Orphans ( +/- Duplicate block elsewhere found on the planet at the same time ) It is on our monitor and we are watching it closely. In anyway, other pools experience the same, it's just a matter of luck (or not) and over a period of days it will level out. Secondly, we are far from loss. The pool is running about 135% of what you should get, with orphans. I did read this topic before ask you this question. And for last 24 hrs after i switch some my rigs to you pool i get 429 XVG and even if i add 135 from "orphan" i get 564 - WTM shows 620. Any explanation? |
|
|
|
|
2 mine_phun
What about "orphan" blocks?
|
|
|
|
|
A lot "orphan" blocks last 24 hrs. Cost me about 100 XVG.
But pool itself not bad. It not stealing like UNI, or not accepting connections like ANT.
|
|
|
|
|
2 Claymore
Thank you for new dual miner !
And pls explain new fee 1.5%, it takes from both coins in dual or how?
|
|
|
|
I'm constantly getting error
Got incorrect temperature 511, ignore
and miner hanging, this is from a rig which was running stable for 2 years ++
on latest claymore
Any idea how to fix this ?
I have exactly the same problem ! Look above your post Change the riser to new one. That will fix it. |
|
|
|
- reduced devfee, it's 1% now if you use secure SSL/TLS connection, 1.5% for unsecure connection.
Explain please.
Depends on pool?
Or some settings?
Your pool should have a SSL port, some are 6666. Look on their site for that and use it to save .5%
Did not find it on suprnova and ethermine. |
|
|
|
|
- reduced devfee, it's 1% now if you use secure SSL/TLS connection, 1.5% for unsecure connection.
Explain please.
Depends on pool?
Or some settings?
|
|
|
|
|
