How to debug lketc.com dragon miner without SSH

[cryptoceelo]

The stupid lketc.com factory have changed the default SSH password for the rasp pi on the miners, we now have 100 machines sat in the farm unable to connect to the network with the same

Error getting device list: ERR: socket connect(0) failed


Previously ive debugged this error from SSH, but we have no access to it and the factory refuse to give it out, to us to semtong or another one of there resellers, but it sounds like the machines are hashing. We are starting to believe lketc have done this deliberately to steal our hash power.

Can any body offer any advice on how to fix this

[psahx]

Can any body offer any advice on how to fix this

Yes:)

Just finished setting up my new 2 1Miner rigs, which were originally produced by lketc.com

I believe your reseller changed the password, cause original lketc boot image is good. Just put the firmware from https://bitcointalk.org/index.php?topic=485497.msg6378219#msg6378219 and boot, set pools, wait 3 minutes. By the way ip is 192.168.1.134. SSH login and pass are default, L: pi P: raspberry. You will not need that

I assume, you have the 4 blade rig.

[cryptoceelo]

no the resellers know nothing of the ssh lock out.

Read my scam aqusation thread here about how lketc.com are scammers

https://bitcointalk.org/index.php?topic=640717.0

Thanks im flashing the cards now (100 very slowly   )

[BTC.LTC.Miner]

Hehehe........ Lisa here 

lketc still do not offer me the password of the SSH. 

But I found a link related to the SD card in other forums.

https://dl.dropboxusercontent.com/u/92967009/dragon_image.7z

I hope this can help those bitcoin miner users who want the original SSH to fix the SD card problem.

Please click "refresh the log" first, then "real time monitor".
 
At the error page, please change 0 into 1, and click auto refresh, and wait for a few minutes. I will be ok.

Excited to talk with you here !!!

 

[wh00per]

  anyone knows how to get SSH access ?

I'm getting the same error as cryptoceelo o a 30MH/s LTC miner ..

The SD image used comes from here >> http://titanminer.com/?page_id=345

[notlist3d]

anyone knows how to get SSH access ?

I'm getting the same error as cryptoceelo o a 30MH/s LTC miner ..

The SD image used comes from here >> http://titanminer.com/?page_id=345

Most easy way to get ssh access is to get a old image.  I unfortunately don't have mine anymore.

But with the old image ssh login is known vs new one where they did not share it.

[Prelude]

Try L: pi P: innosilicon

[wh00per]

Try L: pi P: innosilicon

~10 LTC sent to your vanity address Many Thanks!

[Prelude]

Try L: pi P: innosilicon

~10 LTC sent to your vanity address Many Thanks!

Wow, thank you very much!