alez80 (OP)
Newbie
Offline
Activity: 21
Merit: 0
|
|
September 06, 2012, 01:40:26 PM |
|
Hi there!
I'd like to start mining with my hardware, but I don't know if this is possible.
I've one ASUS HD5870 and one Sapphire HD5970 and I don't know if can I use these cards in the same system. Which operating system do you recommend?
Thanks for reading! :-)
|
|
|
|
lassdas
Legendary
Offline
Activity: 3676
Merit: 1495
|
|
September 06, 2012, 01:59:07 PM |
|
Yes, you can use those cards in the same system. Which OS to recommend depends on what else you want todo, if it's a dedicated mining-system, i'd recommend BAMT, quick and easy install, fire and forget.
|
|
|
|
alez80 (OP)
Newbie
Offline
Activity: 21
Merit: 0
|
|
September 06, 2012, 02:24:07 PM |
|
Thanks for answer.
I'm not a Linux guy at all! There is a guide that explain BAMT to a really newby in Linux/mining? :-)
|
|
|
|
|
alez80 (OP)
Newbie
Offline
Activity: 21
Merit: 0
|
|
September 06, 2012, 02:56:33 PM |
|
I tried to read something from the links that you sent me, but I don't understand almost nothing! Win 7 doesn't work well for mining?
|
|
|
|
lassdas
Legendary
Offline
Activity: 3676
Merit: 1495
|
|
September 06, 2012, 03:11:11 PM |
|
Sure, Win7 will work too, it's way more complicated to set up though, you'll need to get some dummy-plugs, drivers, sdk and of course mining-software all by yourself. BAMT on the other hand is ready to use out of the box, plug and play (and doesn't need a HDD).
|
|
|
|
alez80 (OP)
Newbie
Offline
Activity: 21
Merit: 0
|
|
September 06, 2012, 03:40:15 PM |
|
I have already tried to mine with WinXP(SP3), but I had some problems that I don't know if they were dependent from software or hardware. I mined very well with a HD5870 (about 470Mhash/sec) and GUIminer (OpenCL miner) (OC 1050MHz... this card is equipped with Accelero XTREME ---> 52°C at 75% fan speed :-) very good!).
Now I've problem with my HD5970. Moreover, seems that only one of two GPUs on this card, works with this configuration... every time that I change videocard on my system, I need to reinstall Catalyst & SDK... what a mess!
Configuration Info for HD 5870: Catalyst 10.7 + SDK 2.1 Configuration Info for HD 5970: Catalyst 11.2 + SDK 2.2
Always with GUIMiner & OpenCL miner
From SDK version 2.3, WinXP is not longer supported...
|
|
|
|
alez80 (OP)
Newbie
Offline
Activity: 21
Merit: 0
|
|
September 06, 2012, 04:04:35 PM |
|
...you'll need to get some dummy-plugs... What are dummy plugs? What is their function?
|
|
|
|
lassdas
Legendary
Offline
Activity: 3676
Merit: 1495
|
|
September 06, 2012, 04:14:07 PM |
|
When you've setup the 5970, the 5870 should also just run fine with it, i had a 5970 + 5850 running fine side by side on WinXP. You just need either a dummy-plug, or a monitor connected to both cards (at least on bootup). I do remember that i also had some problems at first with only one of the 5970-cores running on Windows, not sure what i did to solve that though, it's been a while ago and all my GPUs are now on BAMT. Maybe someone else actually using Windows for mining can help you with that.
|
|
|
|
alez80 (OP)
Newbie
Offline
Activity: 21
Merit: 0
|
|
September 06, 2012, 04:45:46 PM |
|
@ lassdas
This evening I would like to try BAMT... so I hope to solve all problems but I think it will be a hard work to do... I can't understand "english technical language" very well... In the meantime, I would like to thank you very much for the time you've spent for me!
A lot of useful informations!
Greetings from Italy and happy mining!
|
|
|
|
vphen
Member
Offline
Activity: 76
Merit: 10
|
|
September 07, 2012, 01:28:18 AM |
|
No problems. guiminer is good for u.
|
|
|
|
|