can the s5 antminer use this fan?

[mconstenla11]

Good Night my Friends

Does somebody knows if i can connect this fan (Sanyo-Denki-San-Ace-120) as a secondary fan for the s5 antminer??

And if so, could i have a problem due to the amperage consumption in the controller board??

Here it is the link of this fan on ebay:


http://www.ebay.com/itm/NEW-Sanyo-Denki-San-Ace-120-PWM-Fan-3A-224-CFM-120mm-12V-9GV1212P1J091-/361311523885?pt=LH_DefaultDomain_0&hash=item541fd8542d


Thanks a lot for help .

[toptek]

Good Night my Friends

Does somebody knows if i can connect this fan (Sanyo-Denki-San-Ace-120) as a secondary fan for the s5 antminer??

And if so, could i have a problem due to the amperage consumption in the controller board??

Here it is the link of this fan on ebay:


http://www.ebay.com/itm/NEW-Sanyo-Denki-San-Ace-120-PWM-Fan-3A-224-CFM-120mm-12V-9GV1212P1J091-/361311523885?pt=LH_DefaultDomain_0&hash=item541fd8542d


Thanks a lot for help .

The 3 Amps might be a problem the controller on the S5 cant turn it the rest will be fine if the controller turns it , i know with one of the delta fans you need external power to power it. if you want to use it with the  S5 I think  it's at 3 amps id have to go look at that fan. just looked at the fan  its at 3.9 amps so I'm not sure with your fan if it will or won't . IF you just want to add a second fan to the stock fan that's even more noise + you won't need but one fan if you stick with the stock fan .

[notlist3d]

I have not used it on the S5.  I can say it works on the S4.   Only thing was it had a little bump to allow it to nicely fit on 3 pin adapters. 

I didn't like it pushing the white adapter back so I filed that little bump off in middle.  After that it fit flush with white adapter.

[toptek]

I used a steak knife on my delta fans i use or any of the PWM fans I use that don't fit the plug .

[marvykkio]

if the fan is 3.9 Am forget it, because the S5 controller can not handle the fan, I tfc1212de delta, and are set aside because they need an external controller to use them

[Rabinovitch]

And you can power a 3-4 pin fan directly from your PSU using special adaptor.