How do I change memclock?

[ragingazn628]

I tried to change memclock in CGminer but it doesn't seem to change it. I also tried MSI Afterburner but that doesn't work either.

7970s / W7 / Catalyst 12.2

[crazyates]

When asking these questions, you need to give a little more information. What cards? OS? driver?

[ragingazn628]

When asking these questions, you need to give a little more information. What cards? OS? driver?

Ah right

7970s / W7 / Catalyst 12.2

[crazyates]

When asking these questions, you need to give a little more information. What cards? OS? driver?

Ah right

7970s / W7 / Catalyst 12.2

First, I'd update to 12.8.

Second, CGMiner can only clock the memory 150MH/s below whatever the core is running at. My 7970 runs at a core:1180, so CGMiner can only clock the mem to 1030.

However, MSI AB can be tweaked to lower your memory to whatever you want. You need MSI AB 2.2.3, but you need a DLL file from 2.2.1. See this thread for more information. I run my 7970 at core:1189 and mem:375. I could go lower, but I lose hashrate if I go to low on the mem.

[ragingazn628]

When asking these questions, you need to give a little more information. What cards? OS? driver?

Ah right

7970s / W7 / Catalyst 12.2

First, I'd update to 12.8.

Second, CGMiner can only clock the memory 150MH/s below whatever the core is running at. My 7970 runs at a core:1180, so CGMiner can only clock the mem to 1030.

However, MSI AB can be tweaked to lower your memory to whatever you want. You need MSI AB 2.2.3, but you need a DLL file from 2.2.1. See this thread for more information. I run my 7970 at core:1189 and mem:375. I could go lower, but I lose hashrate if I go to low on the mem.

file is removed. Do you mind reuploading?

Nvm I downloaded from here

here is the 12.4 dll if anyone needs it, took me forever to find it

http://www.multiupload.nl/0BWAFN4UGM

Why does my first card crash (don't even have a monitor installed) when I lower memclock?

edit 2:

I think 12.8 fixed it but I cannot lower memclock below 685 in MSI Burner. When I set in config to = 2 the bars disappears. Yes I did put the dll file in there ;/

edit 3:

wait it's still at 1375 fml ...

[crazyates]

Did you read all the way down on that thread? https://bitcointalk.org/index.php?topic=103636.msg1137780#msg1137780

[ragingazn628]

Did you read all the way down on that thread? https://bitcointalk.org/index.php?topic=103636.msg1137780#msg1137780

Yup... did everything...
12.8 catalyst
2.2.3 MSI AB with DLL
edited config file in MSI AB
Bars not showing up. Can't change anything in AB

[crazyates]

Did you read all the way down on that thread? https://bitcointalk.org/index.php?topic=103636.msg1137780#msg1137780

Yup... did everything...
12.8 catalyst
2.2.3 MSI AB with DLL
edited config file in MSI AB
Bars not showing up. Can't change anything in AB

you delete the 2 file in the profile folder?

[ragingazn628]

Did you read all the way down on that thread? https://bitcointalk.org/index.php?topic=103636.msg1137780#msg1137780

Yup... did everything...
12.8 catalyst
2.2.3 MSI AB with DLL
edited config file in MSI AB
Bars not showing up. Can't change anything in AB

you delete the 2 file in the profile folder?

Yes

[scifimike12]

ragingazn, try this that I suggested in your PM:

http://www.sendspace.com/file/r7jys0

You will need to restart after it finishes.

[ragingazn628]

ragingazn, try this that I suggested in your PM:

http://www.sendspace.com/file/r7jys0

You will need to restart after it finishes.

Doesn't work for me

[scifimike12]

Bugger...

Have you tried going back to an earlier version of MSI AB?  2.2.1 should work irregardless.