XBTec Pacific V3 3.2Th, 0.8W/Gh

[CrazyGuy]

If I remember correctly, these are just Prisma 1.0 boards in a rack-mountable enclosure. If that's the case, you should be able to use a uart adapter and  mine off an rpi. See if there is a version number on the top right of your hashing boards. Should be 1.0,1.1,1.2 or something like that...

[monkeynutts]

thanks for the info ill take a look tomorrow.

on the controller page if i click on test status i see the boards are v1.47 ?

ill look at the physical boards too see what i can see tomorrow.

could you link a uart adapter please ? would be very usefull.


thanks alot for your assistance.

[pinhead666]

Try google cp2102.

[CrazyGuy]

I don't think a standard cp2102 adapter works with prisma boards. I have a few ASICMINER adapters left over, and I think sidehack/novak still have some of their custom made adapters available.

[monkeynutts]

I don't think a standard cp2102 adapter works with prisma boards. I have a few ASICMINER adapters left over, and I think sidehack/novak still have some of their custom made adapters available.

i guess firstly i need to check the boards to see if they do have numbers written on the top right of them, are they any other identifying features i should be looking for ?

ill get the screwdriver out and take some pics of a board later today.

if ,and at this point its a big if,  they are prisma boards how much would you want for a correct adapter ?

thanks

anthony

[monkeynutts]

I don't think a standard cp2102 adapter works with prisma boards. I have a few ASICMINER adapters left over, and I think sidehack/novak still have some of their custom made adapters available.

i guess firstly i need to check the boards to see if they do have numbers written on the top right of them, are they any other identifying features i should be looking for ?

ill get the screwdriver out and take some pics of a board later today.

if ,and at this point its a big if,  they are prisma boards how much would you want for a correct adapter ?

thanks

anthony

Ok so here are the pictures,



http://imgur.com/itfRNSx,CVpGvzO#0

so do you guys think i could use an cp2102 adapter and a pi with them or will i need a special adapter ? if so how much and where can i buy one.

were these boards unstable ? having replaced the PSU with a decent one and having them run in an air conditioned room (17oc) they would be very unstable, and require a reboot every couple of hours.

thanks for all the help, would really like to make these damn things work properly. possibly going to look at some submersion cooling too.. IF i can get them running stable.

[monkeynutts]

so have any of you guys got the correct adapters so i connect these boards to a Pi.

How reliable are these boards ? wasnt there a recall due to them not performing well or at my boards at v1.2 a good revision ?

cheers

[CrazyGuy]

so have any of you guys got the correct adapters so i connect these boards to a Pi.

How reliable are these boards ? wasnt there a recall due to them not performing well or at my boards at v1.2 a good revision ?

cheers

Looks like a Prisma 1.0 board to me. Send me a PM if you are interested in an adapter.

[monkeynutts]

so have any of you guys got the correct adapters so i connect these boards to a Pi.

How reliable are these boards ? wasnt there a recall due to them not performing well or at my boards at v1.2 a good revision ?

cheers

Looks like a Prisma 1.0 board to me. Send me a PM if you are interested in an adapter.

pm sent ty sir