Hi,
I am trying to mine litecoin with a USB erupter using
cgminer 3.1.1 and the following command :
cgminer-nogpu.exe --icarus-options 115200:1:1 --icarus-timing 3.0=100 -o stratum+tcp://ltc.ghash.io:3333 -u user -p x -S COM5
But I am getting the following
[2016-07-17 14:14:09] Started cgminer 3.1.1
[2016-07-17 14:14:09] Icarus Detect: Test failed at COM5: get 00000000, should: 000187a2
[2016-07-17 14:14:09] Avalon: Error 0 on select in avalon_get_reset
[2016-07-17 14:14:09] Avalon: Reset failed! not an Avalon? (0: 19 48 94 b8)
[2016-07-17 14:14:09] Avalon: Goto idle mode
[2016-07-17 14:14:09] Probing for an alive pool
[2016-07-17 14:14:10] Network diff set to 49.4K
[2016-07-17 14:14:10] Stratum from pool 0 detected new block
[2016-07-17 14:14:11] Avalon: Error 2 on select in avalon_get_reset
[2016-07-17 14:14:12] Avalon: Reset failed! not an Avalon? (0: 10 48 6d 00)
[2016-07-17 14:14:12] Disabling extra threads due to dynamic mode.
[2016-07-17 14:14:12] Tune dynamic intensity with --gpu-dyninterval
[2016-07-17 14:14:12] Avalon: Error 0 on select in avalon_gets
[2016-07-17 14:14:13] Thread 1 being disabled
[2016-07-17 14:14:13] Avalon: Error 0 on select in avalon_get_reset
[2016-07-17 14:14:13] Avalon: Reset failed! not an Avalon? (0: 98 fa c3 09)
[2016-07-17 14:14:13] Avalon: Goto idle mode
[2016-07-17 14:14:13] AVA0: Comms error(read)
[2016-07-17 14:14:13] Avalon: Error 0 on select in avalon_get_reset
[2016-07-17 14:14:13] Avalon: Reset failed! not an Avalon? (0: 68 59 70 00)
I have installed the Silicon Labs CP210x USB to UART bridge driver provided with my erupter and when plugged in, it appears properly in the control Panel in the Ports section (Silicon Labes CP210x USB to UART Bridge (COM5))
Any idea why cgminer does not detect it and fails to connect to it when forced to do so with the -S COM5 parameters ?
Thanks !
