Hello. Just restarted my S5 miner and this is happening.
http://i63.tinypic.com/rif2pl.pngI upgraded the firmware, changed the controller, changed the psu, lowered the frequency and it doesnt fix the problem, please help
![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
Here's some of my kernel log if you guys want to check it out
[spoiler]
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 130816
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129792 pages, LIFO batch:31
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b36000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 511MB = 511MB total
[ 0.000000] Memory: 495544k/495544k available, 28744k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000357] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015408] pid_max: default: 32768 minimum: 301
[ 0.015647] Security Framework initialized
[ 0.015744] Mount-cache hash table entries: 512
[ 0.025661] Initializing cgroup subsys cpuacct
[ 0.025692] Initializing cgroup subsys memory
[ 0.025755] Initializing cgroup subsys blkio
[ 0.025900] CPU: Testing write buffer coherency: ok
[ 0.026441] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.026517] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.027912] Brought up 1 CPUs
[ 0.027936] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.029210] devtmpfs: initialized
[ 0.093787] pinctrl core: initialized pinctrl subsystem
[ 0.094001] rstctl core: initialized rstctl subsystem
[ 0.094495] regulator-dummy: no parameters
[ 0.095005] NET: Registered protocol family 16
[ 0.095774] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.105566] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.106352] platform 49000000.edma: alias fck already exists
[ 0.106385] platform 49000000.edma: alias fck already exists
[ 0.106413] platform 49000000.edma: alias fck already exists
[ 0.107616] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.107801] OMAP GPIO hardware version 0.1
[ 0.109200] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.110475] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.111939] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.112476] of_get_named_gpio_flags exited with status 52
[ 0.112506] gpio-rctrl rstctl.3: loaded OK
[ 0.117317] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.120582] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.122806] cpsw.0: No hwaddr in dt. Using 6c:ec:eb:64:50:0a from efuse
[ 0.122886] cpsw.1: No hwaddr in dt. Using 6c:ec:eb:64:50:0c from efuse
[ 0.138366] bio: create slab <bio-0> at 0
[ 0.150536] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.150772] of_get_named_gpio_flags: can't parse gpios property
[ 0.150986] vmmcsd_fixed: 3300 mV
[ 0.154035] SCSI subsystem initialized
[ 0.154518] usbcore: registered new interface driver usbfs
[ 0.154651] usbcore: registered new interface driver hub
[ 0.154935] usbcore: registered new device driver usb
[ 0.157019] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 0.158541] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 0.160769] DCDC1: at 1500 mV
[ 0.161978] vdd_mpu: 925 <--> 1325 mV at 1100 mV
[ 0.163106] vdd_core: 925 <--> 1150 mV at 1100 mV
[ 0.164210] LDO1: at 1800 mV
[ 0.165285] LDO2: at 3300 mV
[ 0.167280] LDO3: 1800 mV
[ 0.168435] LDO4: at 3300 mV
[ 0.169423] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 0.170156] omap_i2c 44e0b000.i2c: unable to select pin group
[ 0.170864] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[ 0.173191] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.173432] media: Linux media interface: v0.10
[ 0.173537] Linux video capture interface: v2.00
[ 0.173734] pps_core: LinuxPPS API ver. 1 registered
[ 0.173751] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 0.174480] Advanced Linux Sound Architecture Driver Initialized.
[ 0.175705] Switching to clocksource gp_timer
[ 0.193996] NET: Registered protocol family 2
[ 0.195002] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.195145] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[ 0.195370] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.195468] TCP: reno registered
[ 0.195495] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.195541] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.195963] NET: Registered protocol family 1
[ 0.196533] RPC: Registered named UNIX socket transport module.
[ 0.196553] RPC: Registered udp transport module.
[ 0.196567] RPC: Registered tcp transport module.
[ 0.196581] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.196952] Trying to unpack rootfs image as initramfs...
[ 2.124842] Freeing initrd memory: 14744K
[ 2.125559] CPU PMU: probing PMU on CPU 0
[ 2.125591] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 2.126116] omap2_mbox_probe: platform not supported
[ 2.130036] VFS: Disk quotas dquot_6.5.2
[ 2.130273] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.131623] NFS: Registering the id_resolver key type
[ 2.131783] Key type id_resolver registered
[ 2.131800] Key type id_legacy registered
[ 2.131866] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 2.132320] msgmni has been set to 996
[ 2.135181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.135208] io scheduler noop registered
[ 2.135224] io scheduler deadline registered
[ 2.135276] io scheduler cfq registered (default)
[ 2.137138] tps65217-bl tps65217-bl: no platform data provided
[ 2.137179] tps65217-bl: probe of tps65217-bl failed with error -22
[ 2.138068] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.140825] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 2.141109] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.858606] console [ttyO0] enabled
[ 2.863511] [drm] Initialized drm 1.1.0 20060810
[ 2.882136] brd: module loaded
[ 2.892383] loop: module loaded
[ 2.895847] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.903136] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.910411] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.917681] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.924952] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.962940] bone-capemgr bone_capemgr.8: bone: scan failed (1 time)
[ 3.501999] bone-capemgr bone_capemgr.8: bone: scan failed (2 time)
[ 4.041056] bone-capemgr bone_capemgr.8: bone: scan failed (3 time)
[ 4.580117] bone-capemgr bone_capemgr.8: bone: scan failed (4 time)
[ 5.119180] bone-capemgr bone_capemgr.8: bone: scan failed (5 time)
[ 5.658242] bone-capemgr bone_capemgr.8: bone: scan failed (6 time)
[ 6.197311] bone-capemgr bone_capemgr.8: bone: scan failed (7 time)
[ 6.736367] bone-capemgr bone_capemgr.8: bone: scan failed (8 time)
[ 7.275430] bone-capemgr bone_capemgr.8: bone: scan failed (9 time)
[ 7.814492] bone-capemgr bone_capemgr.8: bone: scan failed (10 time)
[ 8.322477] bone-capemgr bone_capemgr.8: Failed to scan baseboard eeprom
[ 8.329545] bone-capemgr: probe of bone_capemgr.8 failed with error -110
[ 8.339102] nand_get_flash_type: 2c,da against 2c,da
[ 8.344627] ONFI param page 0 valid
[ 8.348301] ONFI flash detected
[ 8.351620] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[ 8.363533] omap2-nand: detected x8 NAND flash
[ 8.368196] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 8.373800] omap2-nand: using custom ecc layout
[ 8.378638] 10 ofpart partitions found on MTD device omap2-nand.0
[ 8.385032] Creating 10 MTD partitions on "omap2-nand.0":
[ 8.390706] 0x000000000000-0x000000020000 : "spl"
[ 8.397567] 0x000000020000-0x000000040000 : "spl_backup1"
[ 8.405010] 0x000000040000-0x000000060000 : "spl_backup2"
[ 8.412416] 0x000000060000-0x000000080000 : "spl_backup3"
[ 8.419687] 0x000000080000-0x000000240000 : "u-boot"
[ 8.427958] 0x000000240000-0x000000260000 : "bootenv"
[ 8.434922] 0x000000260000-0x000000280000 : "fdt"
[ 8.441539] 0x000000280000-0x000000780000 : "kernel"
[ 8.452545] 0x000000800000-0x000001c00000 : "root"
[ 8.475967] 0x000001c00000-0x000003000000 : "config"
[ 8.499739] OneNAND driver initializing
[ 8.507246] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17
[ 8.514538] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16
[ 8.524819] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43
[ 8.532107] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42
[ 8.541361] usbcore: registered new interface driver asix
[ 8.547206] usbcore: registered new interface driver cdc_ether
[ 8.553491] usbcore: registered new interface driver smsc95xx
[ 8.559612] usbcore: registered new interface driver net1080
[ 8.565634] usbcore: registered new interface driver cdc_subset
[ 8.571945] usbcore: registered new interface driver zaurus
[ 8.577933] usbcore: registered new interface driver cdc_ncm
[ 8.584678] usbcore: registered new interface driver cdc_acm
[ 8.590636] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.599015] Initializing USB Mass Storage driver...
[ 8.604239] usbcore: registered new interface driver usb-storage
[ 8.610539] USB Mass Storage support registered.
[ 8.615572] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 8.622234] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 8.627474] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.636239] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.636260] musb-hdrc: MHDRC RTL version 2.0
[ 8.636276] musb-hdrc: setup fifo_mode 4
[ 8.636304] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.636456] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 8.641500] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 8.647453] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 8.652697] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.661461] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.661480] musb-hdrc: MHDRC RTL version 2.0
[ 8.661494] musb-hdrc: setup fifo_mode 4
[ 8.661517] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.661635] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 8.666676] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 8.671984] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 8.678388] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 8.686629] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 8.686741] usb usb1: default language 0x0409
[ 8.686799] usb usb1: udev 1, busnum 1, minor = 0
[ 8.686822] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.693952] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.701523] usb usb1: Product: MUSB HDRC host driver
[ 8.706738] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 8.712405] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 8.718274] usb usb1: usb_probe_device
[ 8.718302] usb usb1: configuration #1 chosen from 1 choice
[ 8.718367] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 8.718577] hub 1-0:1.0: usb_probe_interface
[ 8.718599] hub 1-0:1.0: usb_probe_interface - got id
[ 8.718626] hub 1-0:1.0: USB hub found
[ 8.722715] hub 1-0:1.0: 1 port detected
[ 8.726854] hub 1-0:1.0: standalone hub
[ 8.726873] hub 1-0:1.0: individual port power switching
[ 8.726892] hub 1-0:1.0: no over-current protection
[ 8.726909] hub 1-0:1.0: Single TT
[ 8.726930] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 8.726950] hub 1-0:1.0: power on to power good time: 10ms
[ 8.726993] hub 1-0:1.0: local power source is good
[ 8.727099] hub 1-0:1.0: enabling power on all ports
[ 8.728148] mousedev: PS/2 mouse device common for all mice
[ 8.736514] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 8.744303] i2c /dev entries driver
[ 8.749700] pps_ldisc: PPS line discipline registered
[ 8.755181] Driver for 1-wire Dallas network protocol.
[ 8.762422] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 8.769983] cpuidle: using governor ladder
[ 8.774306] cpuidle: using governor menu
[ 8.778846] of_get_named_gpio_flags exited with status 6
[ 8.778865] of_get_named_gpio_flags: can't parse gpios property
[ 8.778881] of_get_named_gpio_flags: can't parse gpios property
[ 8.778917] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 8.786154] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 8.792940] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 8.800147] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 8.807512] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 8.814441] omap_hsmmc mmc.4: pins are not configured from the driver
[ 8.828296] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 8.848245] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
[ 8.859942] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
[ 8.867247] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[ 8.876229] leds-gpio gpio-leds.7: pins are not configured from the driver
[ 8.883490] of_get_named_gpio_flags exited with status 53
[ 8.883515] of_get_named_gpio_flags exited with status 54
[ 8.883536] of_get_named_gpio_flags exited with status 55
[ 8.883557] of_get_named_gpio_flags exited with status 56
[ 8.883624] of_get_named_gpio_flags exited with status 53
[ 8.883921] of_get_named_gpio_flags exited with status 54
[ 8.884137] of_get_named_gpio_flags exited with status 55
[ 8.884325] of_get_named_gpio_flags exited with status 56
[ 8.884934] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.891650] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 8.898848] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 8.906966] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 8.913253] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 8.920450] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 8.932885] usbcore: registered new interface driver usbhid
[ 8.938804] usbhid: USB HID core driver
[ 8.945750] TCP: cubic registered
[ 8.949265] Initializing XFRM netlink socket
[ 8.953822] NET: Registered protocol family 17
[ 8.958644] NET: Registered protocol family 15
[ 8.963484] Key type dns_resolver registered
[ 8.968126] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 8.976242] ThumbEE CPU extension supported.
[ 8.980848] Registering SWP/SWPB emulation handler
[ 8.986843] registered taskstats version 1
[ 9.043033] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 9.049445] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 9.063858] libphy: 4a101000.mdio: probed
[ 9.068165] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 9.078035] Detected MACID = 6c:ec:eb:64:50:0a
[ 9.082716] cpsw 4a100000.ethernet: NAPI disabled
[ 9.089369] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 9.105636] ALSA device list:
[ 9.108777] No soundcards found.
[ 9.112962] Freeing init memory: 264K
[ 9.116877] Failed to execute /init
[ 9.378674] compile Jul 15 2015--15:36:05
[ 9.383003] CM_PER_SPI1_CLKCTRL 0x10002
[ 9.387048] spi_vaddr 0xfa1a0000
[ 9.390429] version 0x40300a0b
[ 9.393621] OMAP2_MCSPI_SYSSTATUS 0x1
[ 9.397448] OMAP2_MCSPI_MODULCTRL 0x1
[ 9.401270] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 9.410216] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 9.422188] hash ok
[ 9.424442] hashtest OK
[ 9.427262] bitmain-asic: success to register device
[ 9.436907] Detect hardware version = 4
[ 9.440990] fix hardware version
[ 9.444373] hardware_version = 0x4
[ 9.448050] S5 ctrl board test V1.1
[ 9.451802] pwm_percent{20}
[ 9.454900] bitmain_asic_open ok
[ 10.814951] stop send work to all chain
[ 10.820161] Sending open core work
[ 10.825086] Send new block cmd
[ 10.929705] pwm_percent{20}
[ 10.932638] timeout {0x1b57}
[ 10.935650] rev timeout {0x571b0080}
[ 10.939476] set_baud cmd_buf[0]{0x86}cmd_buf[1]{0x10}cmd_buf[2]{0x1a}cmd_buf[3]{0x17}
[ 10.947658] send BC data:
[ 10.947658] 0x0000: 0x03 0x00 0x00 0x00 0x86 0x10 0x1a 0x17
[ 10.957041] send BC data:
[ 10.957041] 0x0000: 0x03 0x01 0x00 0x00 0x86 0x10 0x1a 0x17
[ 11.084004] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[ 11.092459] send BC data:
[ 11.092459] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.103526] send BC data:
[ 11.103526] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.230481] bitmain_asic_close
[ 11.495006] jffs2: Empty flash at 0x0046189c ends at 0x00462000
[ 11.903379] jffs2: notice: (147) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 12.754115] net eth0: initializing cpsw version 1.12 (0)
[ 12.761831] net eth0: phy found : id is : 0x7c0f1
[ 12.766769] libphy: PHY 4a101000.mdio:01 not found
[ 12.771785] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 15.840376] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 32.733093] bitmain-asic: success to unregister device
[ 33.755159] compile Jul 15 2015--15:36:05
[ 33.759469] CM_PER_SPI1_CLKCTRL 0x2
[ 33.763137] spi_vaddr 0xfa1a0000
[ 33.766514] version 0x40300a0b
[ 33.769708] OMAP2_MCSPI_SYSSTATUS 0x1
[ 33.773540] OMAP2_MCSPI_MODULCTRL 0x1
[ 33.777380] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 33.782476] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 33.789652] hash ok
[ 33.791878] hashtest OK
[ 33.794674] bitmain-asic: success to register device
[ 33.923630] Detect hardware version = 4
[ 33.927754] fix hardware version
[ 33.931137] hardware_version = 0x4
[ 33.941782] S5 ctrl board test V1.1
[ 33.947436] pwm_percent{20}
[ 33.955319] bitmain_asic_open ok
[ 33.973943] Detect device
[ 33.976821] soft ctrl rst time
[ 33.980367] reset hash asic
[ 33.983798] clear FPGA nonce buffer
[ 34.986364] soft ctrl rst time
[ 34.989665] reset hash asic
[ 34.992603] clear FPGA nonce buffer
[ 36.095740] clear FPGA nonce buffer
[ 36.099562] get chain0 reg0x0
[ 36.102676] send BC data:
[ 36.102676] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.209062] chain0 total asic:0
[ 36.212351] clear FPGA nonce buffer
[ 36.216133] get chain1 reg0x0
[ 36.219240] send BC data:
[ 36.219240] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.326257] chain1 total asic:0
[ 36.329568] total chain_num{2}
[ 36.332768] FPGA detect asic addr err
[ 36.332768]
[ 36.338139]
[ 36.338139]
[ 36.338139] !!!!Restart1 detect asic addr!!!
[ 36.338139]
[ 36.347222] clear FPGA nonce buffer
[ 36.351009] get chain0 reg0x0
[ 36.354118] send BC data:
[ 36.354118] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.461064] chain0 total asic:0
[ 36.464370] clear FPGA nonce buffer
[ 36.468153] get chain1 reg0x0
[ 36.471266] send BC data:
[ 36.471266] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.578211] chain1 total asic:0
[ 36.581537] total chain_num{2}
[ 36.584734] FPGA detect asic addr err
[ 36.584734]
[ 36.590110]
[ 36.590110]
[ 36.590110] !!!!Restart2 detect asic addr!!!
[ 36.590110]
[ 36.599188] clear FPGA nonce buffer
[ 36.603089] get chain0 reg0x0
[ 36.606200] send BC data:
[ 36.606200] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.712980] chain0 total asic:0
[ 36.716281] clear FPGA nonce buffer
[ 36.720070] get chain1 reg0x0
[ 36.723174] send BC data:
[ 36.723174] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.830149] chain1 total asic:0
[ 36.833449] total chain_num{2}
[ 36.836640] FPGA detect asic addr err
[ 36.836640]
[ 36.842012]
[ 36.842012]
[ 36.842012] !!!!Restart3 detect asic addr!!!
[ 36.842012]
[ 36.851106] clear FPGA nonce buffer
[ 36.854890] get chain0 reg0x0
[ 36.857998] send BC data:
[ 36.857998] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.964939] chain0 total asic:0
[ 36.968238] clear FPGA nonce buffer
[ 36.972021] get chain1 reg0x0
[ 36.975131] send BC data:
[ 36.975131] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 37.082128] chain1 total asic:0
[ 37.085443] total chain_num{2}
[ 37.088638] FPGA detect asic addr err
[ 37.088638]
[ 37.094022] S5 board
[ 37.096316] S5 board
[ 37.098602]
[ 37.098602]
[ 37.098602] !!!!soft set defult asic num 30!!!
[ 37.098602]
[ 37.107866] clear FPGA nonce buffer
[ 37.416440] btm_tx_conf
[ 37.419052] fan pwm valid {100}
[ 37.422342] Set asic frequency {350}
[ 37.426084] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x6}cmd_buf[3]{0xc6}
[ 37.434440] send BC data:
[ 37.434440] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x06 0xc6
[ 37.445320] send BC data:
[ 37.445320] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x06 0xc6
[ 37.572281] Set chip_addr{0x0}reg_address{0x4}value{0x820d}
[ 37.578121] timeout {0x1b57}
[ 37.581162] rev timeout {0x571b0080}
[ 37.585184] close chain0 core
[ 37.588300] set_frequency cmd_buf[0]{0x82}cmd_buf[1]{0xd}cmd_buf[2]{0x82}cmd_buf[3]{0x4}
[/spoiler]