Help with claymore miner and adding more GPUs

[Randomhero360]

I'm newer and still learning, I've done a search however most links bring me back to the release post on bitcointalk for claymore. I'm looking for help or an example of how to add 2-3 GPUs to the software and be able to identify them. If someone could show me an example of there command line in their bat file that would really help!

Thanks!

[os2sam]

You shouldn't bother mining Bitcoins with GPU's anymore.

If your mining alt coins then your in the wrong section.  You need to post in the alt coin section, where you will probably get more help.

[philipma1957]

what is wrong with you bro?


same thread by you right here:

https://bitcointalk.org/index.php?topic=1619720.0


and you have this thread here

https://bitcointalk.org/index.php?topic=1619816.0


but I will try to be nice.

lets go from the beginning

your motherboard is?
your cpu is?
your ssd is?
your ram is?
your psu is?
your video cards are?
your os is?



First answer is to your choice of ssd  32gb is too small  get a bigger one


https://www.amazon.com/Kingston-Digital-SSDNow-SV300S37A-120G/dp/B00A1ZTZOG/ref=sr_1_1?

44 bucks and no more problems  as the 120gb ssd should be fine


Second answer your video cards are lumped together and pointed at the pool as one miner>

 i know of  no one that seperates cards on one pc .

 i just have 9 pc's with 23 cards soon to be 9 pcs with 24 cards

rig 1 four cards seen as a  single 96-99mh  miner
rig 2 four cards seen as a single 96-99mh   miner
rig 3 three cards seen as a single 66-70mh miner
rig 4 three cards seen as a single 66-70 mh miner
rig 5 two cards  seen as a single  44-50mh miner
rig 6 two cards  seen as a single  42-46 mh miner
rig 7 two cards   seen as a single  41 -44 mh miner
rig 8 one card soon to be 2
rig 9 two cards seen as a single  40-44 mh miner