![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 30, 2013, 08:26:15 PM |
|
I'm getting started on a new rig. I'm using a Asus P6t6 WS Revolution Motherboard and I've got 7970 gigabyte edition graphics cards. I'm having difficulty getting the BIOs on the Motherboard right. Also, its only recognizing 1 out of 3 graphics cards. I'm also having trouble with the ram, I have 2 4g but they seem to powerful even though I have 64 bit windows os. Anyone have any suggestions? Anyone have a similar rig? Any help would be greatly appreciated.
Here are the bio settings I have right now: Asus P6T6 WS Revolution BIOS Template
Asus P6T6 WS Revolution 0407 Bios Template
**************************** AI Tweaker **************************** AI Overclock Tuner: Manual CPU Ratio Setting: 20 BCLK Frequency: 133 PCIE Frequency: 100 DRAM Frequency: DDR3-1066Mhz UCLK Frequency: 2133Mhz QPI Link Data Rate: AUTO
******************* DRAM Timing Control ******************* DRAM CAS Latency: 7 DRAM Clock DRAM RAS# to CAS# Delay : 7 DRAM Clock DRAM RAS# PRE Time: 7 DRAM Clock DRAM RAS# ACT Time: 24 DRAM Clock DRAM RAS# to RAS# Delay: AUTO DRAM REF Cycle Time: AUTO DRAM WRITE Recovery Time: AUTO DRAM READ to PRE Time: AUTO DRAM FOUR ACT WIN Time: AUTO DRAM Back-To-Back CAS# Delay: AUTO
DRAM Timing Mode: AUTO DRAM Round Trip Latency on CHA: AUTO DRAM Round Trip Latency on CHB: AUTO DRAM Round Trip Latency on CHC: AUTO
DRAM WRITE To READ Delay(DD): AUTO DRAM WRITE To READ Delay(DR): AUTO DRAM WRITE To READ Delay(SR): AUTO DRAM READ To WRITE Delay (DD): AUTO DRAM READ To WRITE Delay (DR): AUTO DRAM READ To WRITE Delay (SR): AUTO DRAM READ To READ Delay(DD): AUTO DRAM READ To READ Delay(DR): AUTO DRAM READ To READ Delay(SR): AUTO DRAM WRITE To WRITE Delay(DD): AUTO DRAM WRITE To WRITE Delay(DR): AUTO DRAM WRITE To WRITE Delay(SR): AUTO
**************************** CPU Voltage: AUTO CPU PLL Voltage: 1.80 QPI/DRAM Core Voltage: 1.20 IOH Voltage: 1.10 IOH PCIE Voltage: 1.50 ICH Voltage: 1.10 ICH PCIE Voltage: 1.50 DRAM Bus Voltage: 1.60 DRAM DATA REF Voltage on CHA: AUTO DRAM CTRL REF Voltage on CHA: AUTO DRAM DATA REF Voltage on CHB: AUTO DRAM CTRL REF Voltage on CHB: AUTO DRAM DATA REF Voltage on CHC: AUTO DRAM CTRL REF Voltage on CHC: AUTO **************************** Load-Line Calibration: AUTO CPU Differential Amplitude: AUTO CPU Clock Skew: AUTO CPU Spread Spectrum: Disabled IOH Clock Skew: AUTO PCIE Spread Spectrum: Disabled
CPU Advance Settings C1E Support: Disabled Hardware Prefetcher: Enabled Adjacent Cache Line Prefetcher: Enabled Intel (R) Virtualization Tech: Disabled CPU TM Function: Disabled Execute Disable Bit: Disabled Intel (R) HT Technology: Enabled Active Processor Cores: ALL A20M: Disabled Intel (R) C-State Tech: Disabled **************************** Express Gate: Disabled
|