So I'm using 2.0.2 of the A4 Software and for whatever reason today my Raspberry Pi has taken to rebooting itself automatically approximately every 5 minutes.
I've started looking at the Pi/Software since I was SSH into it and I got an alert that it was rebooting itself so I know it's not the A4 triggering this.
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fs5.postimg.org%2Fbp4wrnrqf%2FPi_Reboot.jpg&t=665&c=9CFa62gbb6xNOQ)
My First thought is to put a fresh image into the Pi but I would like to edit the interfaces of the image before I write it to an SD card. I'm working out how to do that as that's a bit tricky without a 2nd pi and from Windows. I know where the files are but how I go about editing them inside the image is what I'm working out since the SD card image contains a separate image within it that contains all the files for the Pi.
I'm posting this because I'm looking for someone with maybe some advanced knowledge about the Pi or someone familiar with the A4 image that may be able to give me some things I can try on the current image I have running (remotely)
This image ran fine at my house for over 5 days until today when I transported it to my remote site. After booting it back up is when the problem started.
I know Inno has scripts that are supposed to reboot these things and I'm wondering if something isn't working right to cause it to reboot itself every 5 minutes even though its hashing normally. My guess is some file needs to be cleared.