Hello there, first of all, i want to say sorry for my first post being about asking for mining help, I'll try my best to give the favour back later on! Any help is appreciated
![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
I usually find all my answers on google, but this time I couldn't really find any solutions
![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
So basically I've put in 2x Radeon HD 7970, every thread I can find about ether mining says each card should mine between 20-25MH/s, but as the picture shows, my cards give about half of that
https://i.gyazo.com/ae4a97fe29466bd208bff9ee1fb923e9.pngDone in Ethereum-only mode, if I dual-mine SiaCoin as well, the speed halves again (to about 6MH/s each)
I've configured everything as recommended:
- OS: Windows 7 x64
- GPU Driver: Catalyst 15.12
- GPU 1: Sapphire Vapor-X HD7970 GHZ Edition 3GB
- GPU 2: Sapphire Radeon HD 7970 / 280X OC with Boost 3GB
- PSU: Corsair 750W
None of the cards have been overclocked ever.
Pools tried: nanopool and ethermine.org
Miners tried: Claymore dual miner and genoil miner
I've used the settings recommended by the pools each time (except I added -mode 1 for claymore and tested around a bit, no improvements found)
So anyone know what the problem might be?
![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
Or is this just the general ethereum speed of 7970's these days? The only thing I can think of is the PSU reaching its limit, although ZCash seems to mine normally (~540MH/s total). All help appreciated
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)