how you OC all cards in rig?

[talboris2]

hi
so i can alter only card that connected to monitor..so every reset you OC one by one?
must be some workaround...

Evga x oc even doesnt see other cards
msi doesnt let alter...

[ttlnnt]

Did you try MSI After Burner? I used this software to OC all my rigs no problem.

[jpouza]

Since overclock and TDP customization is mandatory to GPU rig owners, you should read and test by yourself, each algorithm acts different, since you can contrrol the power draw and affect directly the hashrate, your profit is directly affected by those settings, also diminishing the stress on the critical parts such as the VRMs (voltage regulators), you can prolongue a little the video cards lifetime.

Forget EVGA Precision X OC, as the collegue said, use MSI Afterburner and save your settings, they will be automatically applied on the next boot, there are 5 slots to save 5 different OC settings in this software.

[PovertyByte]

Better question is how do you best tweak each individual card since one will crash the entire system? All you need is 1 silicon loser to hold back allthe cards if you are lazy and just go by what single setting I stable for all cards

[talboris2]

thank you for answering.

ok..Msi after is working but only if screen connected to Amd and not to nvidia. i have mixed cards.

2 rx 570 mini cards 4gb elpidia and 1070

i did the bois mod..copied memory from 1500 to rest
and i have got only 25 m/h

i try to OC but i get only 27 m/h maximum
and not equally.

if i give more then 1975 in mem clock the screen is crashed.

how to overclock to 30?

[tflux99]

with elpedia 27 mhs is ok its not the best but its ok 30 mhs with elpedia is not easy to get most cards stuck on 1900 memory elpedia i have some that can get 1950 but 2000 i only get with hynix and some samsung memory

[Cereberus]

RX 570 max can get I think is about 28-28.5 mhash with heavy overclocking from Samsung memory. For Elpida I think you are getting the maximum amount of mhash from your card.

[talboris2]

maximum i get 26.7
and one of the cards many times even less
and mistakes .
now i have only 1908 mhz memory.

what about underwalt?
what can i do?

[talkingdreams]

I just MSI afterburner to overclock  my mining rig. However I only did a small overclock because they will get to hot otherwise.