![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 12, 2017, 03:12:23 PM |
|
So bit of a weird story.
I got an Antminer S5, factory reset it, connected it to a gold 605W PSU and pool and was mining at 350 hz, 1150 GHz and everything was working for around 12 hours at 60 degrees. Before I shut it down I changed the hz to 150 to see if it quieted the fan and shut it down.
I bought a new fan, removed the stock fan and tried to connect the 120mm new fan. The 4 pic connector was slightly different on the back and it wouldn’t fit the plug. I put the stock fan back on and powered up the machine.
Since then the only lights on the miner are 3 green and 1 red on the control board. There are no lights on the blades and I can’t connect to the IP anymore. The 2 lights in the Ethernet cable are on but not the green or red lights on the right of the Ethernet.
I have tried everything to connect, it won’t factory reset and nothing I do changes the power up sequence. The fan turns on and there are just the 1 red light and 3 green lights in a row on the control board. The Ethernet cable is connected and it works on other computers. I can see everything connected to my router but the antminer has disappeared. It seems like it is not powering up at all.
Please help.
|