Need.help with Msi RX 470 4 GB Hynix

[pl4y3r2nd]

Hello every one , just wanted to ask is there anybody here that could help me with custom Bios for my Msi Rx 470 4GB [Hynix] card. What I have done so far is I have created a backup my original bios + copy. Copy I have edited (line from 1500 I have copied and paste 3 times till 2000) also used WattTool. Im mining ETC. Is it possible to get better. hash rate Is Win 10 good for mining , and what drivers from AMD are the best ? What I'm getting is here http://imgur.com/M8nyaRN http://imgur.com/4UlpT0M http://imgur.com/J1feJ62 http://imgur.com/o9t2lsq http://imgur.com/ul2Bydp http://imgur.com/QeMuQ83  Thanks for any help

[cashen]

Hello every one , just wanted to ask is there anybody here that could help me with custom Bios for my Msi Rx 470 4GB [Hynix] card. What I have done so far is I have created a backup my original bios + copy. Copy I have edited (line from 1500 I have copied and paste 3 times till 2000) also used WattTool. Im mining ETC. Is it possible to get better. hash rate Is Win 10 good for mining , and what drivers from AMD are the best ? What I'm getting is here   Thanks for any help

Your target temp is set to 52c.

change it to 73c

[pl4y3r2nd]

I have changed it still same results. https://i.imgur.com/l2na4hQ.jpg also changed drivers on Crimson 16.9.2 Is my fan speed is also ok ?  its 55 % all the time.

[cashen]

I have changed it still same results. also changed drivers on Crimson 16.9.2 Is my fan speed is also ok ?  its 55 % all the time.

You can put you fan on auto. I don't like to force a value because what if for some reason it needs to go higher.

Try to dual mine with DCR Intensity at 27 (-dcri 27)

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool URL:PORT -ewal USERNAME -epsw x -allpools 1 -dpool stratum+tcp://URL:PORT -dwal USERNAME -dpsw x -dcoin dcr -dcri 27 -mport 3333

[cashen]

try increasing voltage. I have 22 of these cards and could not go down to 930. I think I'm at 950 for both and -12 for voltage offset.

[pl4y3r2nd]

i have tried. First card run ok with 950 and -12v. offset but when I tried setup 2 card with -12v it crash windows. Is that possible that 2nd riser from this card is damaged ? or it just a card problem ?