Hello everyone,
New to the forums also new to the Mining world, Was wondering if anyone could give me some advice or suggestions on how to squeeze out more Mh/s from my cards. "2" of them seem to be very soft only doing 19MH/s
.
Details using Claymore Miner, with these settings.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Stock Bios
GPUs---------------------Afterburner Adjustments
R9 290x 4gb Elpida Memory----Core Voltage -62, Power Limit % 0, Core Clock MHz 900, Memory Clock 1250
Rx 570 8gb Micron---------------Core Voltage -96, Power Limit % +50, Core Clock MHz 1100, Memory Clock 2100
Rx 580 8gb Hynix----------------Core Voltage -96, Power Limit % +50, Core Clock MHz 1100, Memory Clock 2100
Rx 580 8gb Hynix----------------Core Voltage -96, Power Limit % +50, Core Clock MHz 1100, Memory Clock 2100
Rx 580 8gb Hynix----------------Core Voltage -96, Power Limit % +50, Core Clock MHz 1100, Memory Clock 2100
Any help or suggestions would be greatly appreciated! Thinking about going and modding the bios, However scary since I've never done it before.
Tac
Mike
Bios Mod all of your cards.
RX580 8GB Hynix can easily do around 29 MH/s (Talking from my experience)
RX570 8GB can do around 27 MH/s.
No idea about 290x but they can do 24-25 MH/s too.
If we calculate a rough estimate of total hashrate considering above values, it'll be more than 138 MH/s.
Moreover, enable manual fan control in MSI AB and run it in auto mode. Your GPU fans are not firing up even when temps are high. Using MSI AB will keep them in control. (Again from experience).