Claymore miner not paying out

[844bankbtc]

I have a miner using (6) Nvidia 1070s.
4 of the 6 cards are being recognizing
I am getting about 106 Mh/s
I just turned it off to check the config and had about 5800 shares

I have had it running for a week and not received a single payout

I originally was having problems connecting to a pool and after 30 minutes I would get an email that it had been disconnected.

I reran the auto config and I think the problem was that it had been set for AMD cards. It started working and mined its ass off.

Now I have all these shares and am not getting any payout. Before in the config file it was mywallet/username
#################/844bankbtc

Now it is mywallet.username
#################.844bankbtc

The "/" changed to a "."

Anyone able to help me figure out what I need to change?

[hous26]

You either haven't input the correct wallet address or you have not yet acquired enough coins for a payout.  You have to mine atleast 1 ETH before Ethermine pays out automatically.  You can manually request a payout but there will be a small fee for it.  You wouldn't receive an automatic Eth payout from Ethermine in one week of mining with 4 1070's.  It will take you about a month and a half with 107 mh/s.  You are more than likely using Ethermine if you are mining Ethereum so this is likely your issue.  If so this is nothing to worry about.  Both Claymore and Ethermine are reuptable.

Log into your pool account/wallet to see if it's paid out.  It will tell you what you have earned.  If its paid out and you haven't received anything then you have the wrong wallet address.

Your bigger issue is that you need to get your 6x 1070s up and running.  First check your devise manager to see if all 6 are recognized by your operating system.  If so then make sure you download the latest drivers from the 'Nividia Experience' or w/e that application is called.  If devise manager doesn't recognize the drivers then you may have bad risers.  Buy new ones if that's the case. I would work diligently to get them up and running because 2 1070s are money.

[pops87]

Claymore miner not paying out
The title says it all 
Nano pool has good help here https://eth.nanopool.org/help

[llzzyy234]

https://bitcointalk.org/index.php?topic=1433925.0

nanopool Ethereum+Siacoin:
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal YOUR_ETH_WALLET/YOUR_WORKER/YOUR_EMAIL -epsw x -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=YOUR_SIA_WALLET&worker=YOUR_WORKER_NAME&email=YOUR_EMAIL" -dcoin sia

nanopool:
   EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1

maybe just the config is not correct

[coinnoob_za]

Claymore Batch usage for Nanopool:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL -mode 1

I'm sure that is self explanatory. You can set your default payout to 0.2Eth

Insert your wallet address at https://eth.nanopool.org/stats then you can monitor your progress until payout.
If only 4 of your cards are working but not 5 or 6......Do you have 4G Encoding enabled in the BIOS of the MB. This is required for windows to detect more than 4 GPU's. Make sure to set your Virtual Memory to minimum 16GB max probably 32GB.

The Setx commands are not really necessary for Nvidia cards. Used to be a must for 2GB cards.

[844bankbtc]

Checked the nanopool and it looks like the miner is working. Hasn't paid out yet so I changed the minimum and will give it a day or two more.

Still trying to figure out the last two video cards. I can plug in any 4 cards, doesn't matter which ones and they all work. Plug in more than 4 and my computer freaks out.

I am a newb when it comes to building computers so I will have to do some research on changing the bios and virtual memory