[HELP] CM1 R-Pi baud rate

[evilscoop]

Ok running a cairnsmore 1 from rpi (v2)
Have raspbian weezy installed, and ftdi drivers (libftdi1)

all is fine and dandy, but...
In the cgminer (3.1.1)/bfgminer (git cloned) driver-icarus.c, I have to set
#define ICARUS_IO_SPEED 57600
Or they will not talk to the CM1...

And before you ask, yes sw6-1 is off

Controller is flashed to 1.5
Fpga's are flashed to std 200 bitstream..

using 
modprobe ftdi-sio product=0x8350 vendor=0x0403

to get the /dev/ttyUSB's


Anyone know how to get these back to normal 115200

[evilscoop]

nm think ive found my own issue.....must read the manual for icarus-options tsk.....

moving onto overclocking...so ignore this post lol