New Eth Genoil Branch (with Claymore kernels)

[Saint79]

7*R9 390
With claymore 221 Mh
With this miner 218 Mh

Interesting, is that a measured hash rate, or the reported hash rate? There are two possibilities for this difference
1. I messed up the launch params on hawaii archs, in which case you may be able to fix it with

Code:

-eint k

where k is some value > 0, and is 8 by default.
2. There's too much variance in the reported hashrate, and it needs to be averaged by the miner over a longer period of time (which I'll probably add in the next release, because my reported rates are all over the place sometimes too.)

I try -eint from 0 to 8  <8 drops hashrate.
This miner reported hash,  pool average hash `same as claymore.

(Sorry for bad english)

[ntrader]

How about fee in miner?

[MATHReX]

It's thirty seconds for every hour which is 0.84% fees.

[goobur]

7*R9 390
With claymore 221 Mh
With this miner 218 Mh

Interesting, is that a measured hash rate, or the reported hash rate? There are two possibilities for this difference
1. I messed up the launch params on hawaii archs, in which case you may be able to fix it with

Code:

-eint k

where k is some value > 0, and is 8 by default.
2. There's too much variance in the reported hashrate, and it needs to be averaged by the miner over a longer period of time (which I'll probably add in the next release, because my reported rates are all over the place sometimes too.)

I try -eint from 0 to 8  <8 drops hashrate.
This miner reported hash,  pool average hash `same as claymore.

(Sorry for bad english)

Try higher than 8. Maybe 9. Looks like my reporting is slightly off, will try to fix in next release.

It's thirty seconds for every hour which is 0.84% fees.

Yes, which can be turned off completely (see the releases page). It's also not present if you build from source code.

[kapsel]

I appreciate a project like this, but it really needs dual mining capability to be competitive with claymore's miner.

[hwgeek]

anyone tested this on nvidia cards? i assume no devfee here? been waiting for this for quite some time now..

P.S.
Put this into your bat file for no dev fee, but you truly s*ck if you use it.

Code:

--i-suck

ROFL!!! OMG love it!, I think all Dev's should use the Fee option like this LOL.

[sabercrypto]

any update on this?

[kenshiroth]

i'm newbie. how do you do? please expland 

[OverEasy]

Testing now. Working very well so far on Windows with a variety of AMD cards.
Getting higher mh/s then stock Ethminer.

Also tested on my Windows rig with (1) 1070 and (4) 1060's
Consumed all memory on rig during DAG and then just stopped.
Could be my rig I guess but Clay runs fine on it. Stock Ethminer does do similar slowdown and stops.
I am doing all the testing on Dwarfpool and hash rates seems to be reporting just fine.

Nice work!
Rest of my rigs are Ubuntu. Any plans for a Linux version?

[awdmesh]

I used git to pull down the master branch today, compiled on Xubuntu 16.04.3, but had to leave the Cuda option off (couldn’t get the right settings/toolkit). I have 2 Asus Strix 570 4GB and one 1060 3Gb. Up until today I’ve been using claymore to run all three, but have previously used latest ethminer.

Since I couldn’t get your release to run all three cards I ran two instances (goober miner compiled for Opencl + normal ethminer precompiled and downloaded for Cuda) by making different .sh files and used different miner names.

I would like to report that your miner ran my AMD at the same if not slightly higher speed as Claymore.

On top of that, Ethminer runs my 1060 at same/sometimes higher speed as claymore.

Thank you, I know I may lose some things like Watchdog dual mining, but honestly I’ve run Ethminer in the past and it’s stable on Linux. I’ll monitor this setup and report back.

All 3 cards AMD + Nvidia same speeds - no claymore. Best of both worlds.

[ik1332]

Thanks goober. My avg hashing rate at ethminer has drastically increased. 

[CryptoWatcher420]

if I were you id find other coins than these
SIA
DECRED
PASCAL
LBRY

I don't know if you currently know but Baikal came out with an asic to mine sia/decred/pascal and lbry so adding those will be pointless as no one with a gpu will make any money from mining those algo's because of the asic that targets those algo's

[nerdralph]

Just noticed this thread so I downloaded and built for Ubuntu 16.04 with AMDGPU-Pro 17.40.
I don't like the new boost dependencies (it downloaded 1.65 even though I have 1.58 installed).
A quick test with the 8k(default) and 16k global work showed very little difference in performance vs ethminer-nr.  I got 28.56Mh vs 28.44 on a Rx 470 1126/2000 clocks.

[rockk]

Could anyone share the .bat file with ethminer pool ?  i cannot start it :/

[cdrx]

Any updates, goobur ?

[piotr_PL]

It is great work. I am using it now.

[rfaisal]

Problem 1: Goobur not recognize AMD GPU Card, only recognize Intel built in HD card, I uninstall the drive by DDU and reinstall the drive but script not recognize AMD card. please help.

Problem 2: asia1.ethermine.org:4444 port was not connecting but asia1.ethermine.org:14444 was connected any other port for goobur.

Please give a solution because I want to use goobur.

[QuintLeo]

if I were you id find other coins than these
SIA
DECRED
PASCAL
LBRY

I don't know if you currently know but Baikal came out with an asic to mine sia/decred/pascal and lbry so adding those will be pointless as no one with a gpu will make any money from mining those algo's because of the asic that targets those algo's

 Then Bitmain came out with THEIR SIA miner.

[theAwesomeGuy31]

Hello,
Is there a way to enable the devfee on the source code? Only releases seem to come with it, and the only one is for windows, but I am on linux.
 Thank you!

[UnclWish]

Project is dead, as I see? Or I'm wrong?