CGMiner finally loads but 0 hash rate ?

[MoFlicka]

 Ok guys I need help. It took days of reading and messing around but I finally got CGMiner to run but it constantly says 0 for the hash rate.I have tried version 3.4 of CGMiner and the same thing. I have also messed with any settings that i can and still no change. I don't see any other post about a 0 hash rate and am out of ideas.

This is a ASIC Erupter running on a windows xp dual core service pack 2 machine

Thank you



 cgminer version 3.1.1 - Started: [2013-09-19 16:49:02]
-------------------------------------------------------------------------------
ALL (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  U:0.0/m  WU:0.0/m
 ST: 2  SS: 0  NB: 1  LW: 6  GF: 0  RF: 0
 Connected to stratum.btcguild.com diff 2 with stratum as user MoFlicka_1
 Block: 0014bb9b3c6967aa...  Diff:113M  Started: [16:49:02]  Best share: 0
-------------------------------------------------------------------------------
 [P]ool management ettings [D]isplay options [Q]uit
-------------------------------------------------------------------------------

 [2013-09-19 16:49:26] ALL (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  U:0.0/m
WU:0.0/m
 [2013-09-19 16:49:32] ALL (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  U:0.0/m
WU:0.0/m
 [2013-09-19 16:49:38] ALL (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  U:0.0/m
WU:0.0/m
 [2013-09-19 16:49:44] ALL (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  U:0.0/m
WU:0.0/m
 [2013-09-19 16:49:50] ALL (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  U:0.0/m
WU:0.0/m
 [2013-09-19 16:49:56] ALL (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  U:0.0/m
WU:0.0/m
 [2013-09-19 16:50:02] ALL (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  U:0.0/m
WU:0.0/m

[MRKLYE]

use "Zadig" and install the "WinUSB" drivers for the device.

Should get you up and running!

[MoFlicka]

I have used Zadig numerous times meaning i installed it and it wouldn't work and i just kept reinstalling a time or three and that is what finally got cgminer to load. I have tried this on two machines both running xp. I'll try it on a laptop running win 7 that i have but would rather it ran on my other pc.

Any more ideas or is the winusb the problem still 

[MoFlicka]

All good now. I reinstalled winusb with zadig and it's working. I'm still confused as hell to what was wrong. I'll try to get it going on the other pc and try to figure out what was wrong but it seems to be working now. Huum......

Thank you 

[ravagetheearth]

Glad you got up and running!

[MRKLYE]

All good now. I reinstalled winusb with zadig and it's working. I'm still confused as hell to what was wrong. I'll try to get it going on the other pc and try to figure out what was wrong but it seems to be working now. Huum......

Thank you 

Good to hear man! It took me a few hours to get my erupter running too.

Trail and error seems to be the best bet for these puppies.. hahaha