KWMiner (OP)
Newbie
 Offline
Activity: 6
Merit: 0
|
 |
December 20, 2017, 11:49:36 PM
Last edit: December 21, 2017, 01:23:52 AM by KWMiner |
|
UPDATE: It works when I point it at another point, but I still get nothing when I point it at Antpool?S9 Kernel Log reporting BMMiner not found? Also I'm getting no data on the Miner Status tab, not even temp, even after waiting for the bootup period. I've got no BMminer version or Hardware version on the systems page. And I'm running Kernel version Linux 3.14.0-xilinx-ge8a2f71-dirty #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017 and File System Version Fri Nov 17 17:37:49 CST 2017 The lights on each of the hashboards are red, but all the lights on the controller where the ribbons from each hashboard connect are green. One is flashing. the rest are solid green. The light on the front of the controller is solid green? And the fault light is not lit up. Any help is appreciated; not sure if it's a problem with the boards, if I should upgrade the firmware, or if I should reboot the OS? I've seen lots of recent posts mentioning people are getting data on the Miner Status page, someone mentioned "pinging bitmain" from the miner... I'm not sure how to go about this. Someone else also mentioned replacing the PSU? I'm using a EVGA SuperNOVA 1600 T2 ( https://www.amazon.com/gp/product/B00R33ZBQU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) Here's the code; [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000309] ps7-ttc #0 at df804000, irq=43
[ 0.000619] Console: colour dummy device 80x30
[ 0.000650] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040205] pid_max: default: 32768 minimum: 301
[ 0.040424] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040445] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042574] CPU: Testing write buffer coherency: ok
[ 0.042906] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042966] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043193] L310 cache controller enabled
[ 0.043212] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121033] CPU1: Booted secondary processor
[ 0.210226] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210357] Brought up 2 CPUs
[ 0.210376] SMP: Total of 2 processors activated.
[ 0.210384] CPU: All CPU(s) started in SVC mode.
[ 0.211048] devtmpfs: initialized
[ 0.213470] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214683] regulator-dummy: no parameters
[ 0.222358] NET: Registered protocol family 16
[ 0.224542] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226837] cpuidle: using governor ladder
[ 0.226851] cpuidle: using governor menu
[ 0.234302] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235825] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235839] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235952] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257626] bio: create slab <bio-0> at 0
[ 0.259035] vgaarb: loaded
[ 0.259733] SCSI subsystem initialized
[ 0.260705] usbcore: registered new interface driver usbfs
[ 0.260880] usbcore: registered new interface driver hub
[ 0.261134] usbcore: registered new device driver usb
[ 0.261668] media: Linux media interface: v0.10
[ 0.261824] Linux video capture interface: v2.00
[ 0.262073] pps_core: LinuxPPS API ver. 1 registered
[ 0.262084] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262209] PTP clock support registered
[ 0.262574] EDAC MC: Ver: 3.0.0
[ 0.263621] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266469] DMA-API: preallocated 4096 debug entries
[ 0.266482] DMA-API: debugging enabled by kernel config
[ 0.266557] Switched to clocksource arm_global_timer
[ 0.287262] NET: Registered protocol family 2
[ 0.287904] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.287962] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.288047] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.288093] TCP: reno registered
[ 0.288110] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288141] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288385] NET: Registered protocol family 1
[ 0.288680] RPC: Registered named UNIX socket transport module.
[ 0.288693] RPC: Registered udp transport module.
[ 0.288701] RPC: Registered tcp transport module.
[ 0.288709] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288721] PCI: CLS 0 bytes, default 64
[ 0.289153] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291158] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293313] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293494] msgmni has been set to 967
[ 0.294262] io scheduler noop registered
[ 0.294276] io scheduler deadline registered
[ 0.294315] io scheduler cfq registered (default)
[ 0.307623] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.307643] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.431865] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.000373] console [ttyPS0] enabled
[ 1.004648] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.012298] [drm] Initialized drm 1.1.0 20060810
[ 1.029464] brd: module loaded
[ 1.038859] loop: module loaded
[ 1.048455] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.054205] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.062303] libphy: XEMACPS mii bus: probed
[ 1.066751] ------------- phy_id = 0x3625e62
[ 1.071496] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.080206] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.086905] ehci-pci: EHCI PCI platform driver
[ 1.094110] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.100931] usbcore: registered new interface driver usb-storage
[ 1.107797] mousedev: PS/2 mouse device common for all mice
[ 1.113882] i2c /dev entries driver
[ 1.120819] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.126307] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.132213] Xilinx Zynq CpuIdle Driver started
[ 1.137129] sdhci: Secure Digital Host Controller Interface driver
[ 1.143227] sdhci: Copyright(c) Pierre Ossman
[ 1.147643] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.154378] mmc0: no vqmmc regulator found
[ 1.158424] mmc0: no vmmc regulator found
[ 1.196578] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205263] usbcore: registered new interface driver usbhid
[ 1.210769] usbhid: USB HID core driver
[ 1.215485] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.221784] nand: Micron MT29F2G08ABAEAWP
[ 1.225751] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.231691] Bad block table found at page 131008, version 0x01
[ 1.237920] Bad block table found at page 130944, version 0x01
[ 1.243971] 3 ofpart partitions found on MTD device pl353-nand
[ 1.249749] Creating 3 MTD partitions on "pl353-nand":
[ 1.254843] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.262899] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270202] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279141] TCP: cubic registered
[ 1.282380] NET: Registered protocol family 17
[ 1.287095] Registering SWP/SWPB emulation handler
[ 1.292986] regulator-dummy: disabling
[ 1.297353] UBI: attaching mtd1 to ubi0
[ 1.827510] UBI: scanning is finished
[ 1.839176] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.846232] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.853027] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.859703] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.866542] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.872553] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.879663] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1283732989
[ 1.888693] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.897910] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.897916] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.901815] ALSA device list:
[ 1.901818] No soundcards found.
[ 1.918263] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.947367] UBIFS: recovery needed
[ 2.039704] UBIFS: recovery completed
[ 2.043375] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.049328] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.058427] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.068316] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.073345] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[ 2.084647] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.091842] devtmpfs: mounted
[ 2.094947] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.932204] random: dd urandom read with 0 bits of entropy available
[ 3.316624]
[ 3.316624] bcm54xx_config_init
[ 3.926602]
[ 3.926602] bcm54xx_config_init
[ 7.927420] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.933530] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.575477] In axi fpga driver!
[ 22.578585] request_mem_region OK!
[ 22.581947] AXI fpga dev virtual address is 0xdf9fc000
[ 22.587069] *base_vir_addr = 0x8c510
[ 22.602585] In fpga mem driver!
[ 22.605656] request_mem_region OK!
[ 22.609251] fpga mem virtual address is 0xe2000000
[ 23.406579]
[ 23.406579] bcm54xx_config_init
[ 24.036600]
[ 24.036600] bcm54xx_config_init
[ 28.037435] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.043542] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 382.003959] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 8058458966008814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[45] has core num=3
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[40] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[0] has core num=1
Chain[7] ASIC[1] has core num=1
Chain[7] ASIC[2] has core num=1
Chain[7] ASIC[3] has core num=1
Chain[7] ASIC[4] has core num=1
Chain[7] ASIC[5] has core num=1
Chain[7] ASIC[6] has core num=1
Chain[7] ASIC[7] has core num=1
Chain[7] ASIC[8] has core num=1
Chain[7] ASIC[9] has core num=1
Chain[7] ASIC[10] has core num=1
Chain[7] ASIC[11] has core num=2
Chain[7] ASIC[12] has core num=2
Chain[7] ASIC[13] has core num=1
Chain[7] ASIC[14] has core num=1
Chain[7] ASIC[15] has core num=1
Chain[7] ASIC[16] has core num=1
Chain[7] ASIC[17] has core num=1
Chain[7] ASIC[19] has core num=1
Chain[7] ASIC[20] has core num=1
Chain[7] ASIC[21] has core num=1
Chain[7] ASIC[22] has core num=1
Chain[7] ASIC[23] has core num=1
Chain[7] ASIC[24] has core num=2
Chain[7] ASIC[25] has core num=1
Chain[7] ASIC[26] has core num=1
Chain[7] ASIC[27] has core num=2
Chain[7] ASIC[28] has core num=1
Chain[7] ASIC[29] has core num=1
Chain[7] ASIC[31] has core num=1
Chain[7] ASIC[32] has core num=1
Chain[7] ASIC[33] has core num=1
Chain[7] ASIC[34] has core num=1
Chain[7] ASIC[35] has core num=2
Chain[7] ASIC[37] has core num=2
Chain[7] ASIC[38] has core num=2
Chain[7] ASIC[39] has core num=2
Chain[7] ASIC[40] has core num=1
Chain[7] ASIC[41] has core num=1
Chain[7] ASIC[43] has core num=2
Chain[7] ASIC[44] has core num=1
Chain[7] ASIC[45] has core num=1
Chain[7] ASIC[47] has core num=15
Chain[7] ASIC[48] has core num=1
Chain[7] ASIC[49] has core num=1
Chain[7] ASIC[50] has core num=2
Chain[7] ASIC[52] has core num=1
Chain[7] ASIC[53] has core num=1
Chain[7] ASIC[54] has core num=1
Chain[7] ASIC[55] has core num=1
Chain[7] ASIC[56] has core num=1
Chain[7] ASIC[57] has core num=1
Chain[7] ASIC[59] has core num=1
Chain[7] ASIC[60] has core num=1
Chain[7] ASIC[62] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=125 on chain[7], value=870
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,-3,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-5,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-4,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1719 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=21353 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8058458966008814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4320
get fan[2] speed=4320
get fan[2] speed=4320
get fan[2] speed=4320
get fan[2] speed=4320
get fan[2] speed=4320
get fan[5] speed=5760
get fan[2] speed=4320
get fan[5] speed=5760
get fan[2] speed=4320
get fan[5] speed=5760
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=125 value=870
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[45] has core num=3
Chain[J7] has core num in PIC
Chain[J7] ASIC[40] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[0] has core num=1
Chain[J8] ASIC[1] has core num=1
Chain[J8] ASIC[2] has core num=1
Chain[J8] ASIC[3] has core num=1
Chain[J8] ASIC[4] has core num=1
Chain[J8] ASIC[5] has core num=1
Chain[J8] ASIC[6] has core num=1
Chain[J8] ASIC[7] has core num=1
Chain[J8] ASIC[8] has core num=1
Chain[J8] ASIC[9] has core num=1
Chain[J8] ASIC[10] has core num=1
Chain[J8] ASIC[11] has core num=2
Chain[J8] ASIC[12] has core num=2
Chain[J8] ASIC[13] has core num=1
Chain[J8] ASIC[14] has core num=1
Chain[J8] ASIC[15] has core num=1
Chain[J8] ASIC[16] has core num=1
Chain[J8] ASIC[17] has core num=1
Chain[J8] ASIC[19] has core num=1
Chain[J8] ASIC[20] has core num=1
Chain[J8] ASIC[21] has core num=1
Chain[J8] ASIC[22] has core num=1
Chain[J8] ASIC[23] has core num=1
Chain[J8] ASIC[24] has core num=2
Chain[J8] ASIC[25] has core num=1
Chain[J8] ASIC[26] has core num=1
Chain[J8] ASIC[27] has core num=2
Chain[J8] ASIC[28] has core num=1
Chain[J8] ASIC[29] has core num=1
Chain[J8] ASIC[31] has core num=1
Chain[J8] ASIC[32] has core num=1
Chain[J8] ASIC[33] has core num=1
Chain[J8] ASIC[34] has core num=1
Chain[J8] ASIC[35] has core num=2
Chain[J8] ASIC[37] has core num=2
Chain[J8] ASIC[38] has core num=2
Chain[J8] ASIC[39] has core num=2
Chain[J8] ASIC[40] has core num=1
Chain[J8] ASIC[41] has core num=1
Chain[J8] ASIC[43] has core num=2
Chain[J8] ASIC[44] has core num=1
Chain[J8] ASIC[45] has core num=1
Chain[J8] ASIC[47] has core num=15
Chain[J8] ASIC[48] has core num=1
Chain[J8] ASIC[49] has core num=1
Chain[J8] ASIC[50] has core num=2
Chain[J8] ASIC[52] has core num=1
Chain[J8] ASIC[53] has core num=1
Chain[J8] ASIC[54] has core num=1
Chain[J8] ASIC[55] has core num=1
Chain[J8] ASIC[56] has core num=1
Chain[J8] ASIC[57] has core num=1
Chain[J8] ASIC[59] has core num=1
Chain[J8] ASIC[60] has core num=1
Chain[J8] ASIC[62] has core num=1
miner total rate=13739GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-3
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-5
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-4
Chain:7 base freq=668
Asic[ 0]:668
Asic[ 1]:668 Asic[ 2]:668 Asic[ 3]:668 Asic[ 4]:668 Asic[ 5]:668 Asic[ 6]:668 Asic[ 7]:668 Asic[ 8]:668
Asic[ 9]:668 Asic[10]:668 Asic[11]:668 Asic[12]:668 Asic[13]:668 Asic[14]:668 Asic[15]:668 Asic[16]:668
Asic[17]:668 Asic[18]:668 Asic[19]:668 Asic[20]:668 Asic[21]:668 Asic[22]:668 Asic[23]:668 Asic[24]:668
Asic[25]:668 Asic[26]:668 Asic[27]:668 Asic[28]:668 Asic[29]:668 Asic[30]:668 Asic[31]:668 Asic[32]:668
Asic[33]:668 Asic[34]:668 Asic[35]:668 Asic[36]:668 Asic[37]:668 Asic[38]:668 Asic[39]:668 Asic[40]:668
Asic[41]:668 Asic[42]:668 Asic[43]:668 Asic[44]:668 Asic[45]:668 Asic[46]:668 Asic[47]:668 Asic[48]:668
Asic[49]:668 Asic[50]:668 Asic[51]:668 Asic[52]:668 Asic[53]:668 Asic[54]:668 Asic[55]:668 Asic[56]:668
Asic[57]:668 Asic[58]:668 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
Chain:7 max freq=668
Chain:7 min freq=668
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-3
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-5
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-4
Chain:7 base freq=668
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Detect a bad chip=47 on chain[7], fixed to 400M
Asic[47]:668 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:7 max freq=668
Chain:7 min freq=650
max freq = 668
set baud=1
Chain[J6] PIC temp offset=62,-3,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
Chain[J6] chip[244] use PIC middle temp offset=-3 typeID=55
New offset Chain[5] chip[244] local:37 remote:40 offset:28
Chain[J6] chip[244] get middle temp offset=28 typeID=55
Chain[J7] PIC temp offset=62,-5,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
Chain[J7] chip[244] use PIC middle temp offset=-5 typeID=55
New offset Chain[6] chip[244] local:33 remote:37 offset:26
Chain[J7] chip[244] get middle temp offset=26 typeID=55
Chain[J8] PIC temp offset=62,-4,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
Chain[J8] chip[244] use PIC middle temp offset=-4 typeID=55
New offset Chain[7] chip[244] local:32 remote:37 offset:25
Chain[J8] chip[244] get middle temp offset=25 typeID=55
single board rate=4529 voltage limit=890 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 890
single board rate=4531 voltage limit=890 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 890
single board rate=4574 voltage limit=890 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 890
Chain[J6] set working voltage=890 [91]
Chain[J7] set working voltage=890 [91]
Chain[J8] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25852
last_nonce_num:28607
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25854
last_nonce_num:28601
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=907 asic[01]=910 asic[02]=911 asic[03]=909 asic[04]=908 asic[05]=906 asic[06]=907 asic[07]=908
asic[08]=908 asic[09]=907 asic[10]=909 asic[11]=905 asic[12]=903 asic[13]=911 asic[14]=911 asic[15]=907
asic[16]=909 asic[17]=910 asic[18]=912 asic[19]=907 asic[20]=907 asic[21]=907 asic[22]=907 asic[23]=907
asic[24]=904 asic[25]=911 asic[26]=907 asic[27]=905 asic[28]=910 asic[29]=907 asic[30]=912 asic[31]=908
asic[32]=909 asic[33]=909 asic[34]=911 asic[35]=901 asic[36]=912 asic[37]=899 asic[38]=899 asic[39]=905
asic[40]=909 asic[41]=908 asic[42]=912 asic[43]=908 asic[44]=904 asic[45]=908 asic[46]=912 asic[47]=912
asic[48]=906 asic[49]=910 asic[50]=905 asic[51]=912 asic[52]=907 asic[53]=909 asic[54]=908 asic[55]=904
asic[56]=909 asic[57]=909 asic[58]=912 asic[59]=910 asic[60]=911 asic[61]=912 asic[62]=908
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[00]=907
core[026]=3
asic[01]=910
core[102]=6
asic[02]=911
core[070]=7
asic[03]=909
core[094]=5
asic[04]=908
core[010]=4
asic[05]=906
core[050]=2
asic[06]=907
core[089]=3
asic[07]=908
core[097]=4
asic[08]=908
core[014]=4
asic[09]=907
core[103]=3
asic[10]=909
core[018]=5
asic[11]=905
core[042]=5 core[088]=4
asic[12]=903
core[069]=6 core[086]=1
asic[13]=911
core[089]=7
asic[14]=911
core[009]=7
asic[15]=907
core[096]=3
asic[16]=909
core[013]=5
asic[17]=910
core[084]=6
asic[19]=907
core[080]=3
asic[20]=907
core[074]=3
asic[21]=907
core[044]=3
asic[22]=907
core[017]=3
asic[23]=907
core[078]=3
asic[24]=904
core[019]=6 core[051]=2
asic[25]=911
core[009]=7
asic[26]=907
core[012]=3
asic[27]=905
core[014]=2 core[052]=7
asic[28]=910
core[113]=6
asic[29]=907
core[027]=3
asic[31]=908
core[109]=4
asic[32]=909
core[050]=5
asic[33]=909
core[037]=5
asic[34]=911
core[020]=7
asic[35]=901
core[035]=4 core[111]=1
asic[37]=899
core[018]=3 core[059]=0
asic[38]=899
core[011]=0 core[096]=3
asic[39]=905
core[096]=4 core[098]=5
asic[40]=909
core[058]=5
asic[41]=908
core[111]=4
asic[43]=908
core[051]=6 core[056]=6
asic[44]=904
core[060]=0
asic[45]=908
core[100]=4
asic[48]=906
core[082]=2
asic[49]=910
core[024]=6
asic[50]=905
core[003]=7 core[029]=2
asic[52]=907
core[112]=3
asic[53]=909
core[040]=5
asic[54]=908
core[065]=4
asic[55]=904
core[108]=0
asic[56]=909
core[009]=5
asic[57]=909
core[079]=5
asic[59]=910
core[074]=6
asic[60]=911
core[023]=7
asic[62]=908
core[003]=4
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=656 freq[30]=656 freq[31]=656
freq[32]=656 freq[33]=656 freq[34]=656 freq[35]=656 freq[36]=656 freq[37]=656 freq[38]=656 freq[39]=656
freq[40]=656 freq[41]=656 freq[42]=656 freq[43]=656 freq[44]=656 freq[45]=656 freq[46]=656 freq[47]=668
freq[48]=656 freq[49]=656 freq[50]=656 freq[51]=656 freq[52]=656 freq[53]=656 freq[54]=656 freq[55]=656
freq[56]=656 freq[57]=656 freq[58]=656 freq[59]=656 freq[60]=656 freq[61]=656 freq[62]=656
total valid nonce number:57207
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26486
last_nonce_num:35731
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=1685 total_tv_end_sys=1686
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=57.3100 Asic[02]=53.9720 Asic[03]=54.3410 Asic[04]=54.6260 Asic[05]=56.3880 Asic[06]=54.4420 Asic[07]=56.6730 Asic[08]=56.1190
Asic[09]=55.7500 Asic[10]=55.2800 Asic[11]=55.4310 Asic[12]=55.6660 Asic[13]=55.3480 Asic[14]=54.7270 Asic[15]=55.0790 Asic[16]=54.2070
Asic[17]=54.8950 Asic[18]=54.5930 Asic[19]=55.0620 Asic[20]=55.9850 Asic[21]=56.7400 Asic[22]=53.4520 Asic[23]=55.4820 Asic[24]=947.812
Asic[25]=55.6660 Asic[26]=56.1530 Asic[27]=56.1360 Asic[28]=55.3480 Asic[29]=60.9010 Asic[30]=56.5050 Asic[31]=52.8480 Asic[32]=55.1130
Asic[33]=53.0990 Asic[34]=54.3410 Asic[35]=55.1130 Asic[36]=55.2130 Asic[37]=56.5220 Asic[38]=56.0350 Asic[39]=54.9780 Asic[40]=55.1460
Asic[41]=54.1060 Asic[42]=56.2870 Asic[43]=54.4250 Asic[44]=112.558 Asic[45]=56.5390 Asic[46]=55.8680 Asic[47]=55.4150 Asic[48]=52.5460
Asic[49]=52.9820 Asic[50]=54.0560 Asic[51]=54.7100 Asic[52]=56.1700 Asic[53]=55.7000 Asic[54]=55.7500 Asic[55]=55.0620 Asic[56]=56.5550
Asic[57]=59.0720 Asic[58]=658.673 Asic[59]=55.5490 Asic[60]=55.4990 Asic[61]=242.598 Asic[62]=53.5190 Asic[63]=55.9180
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=50.3480 Asic[02]=47.4120 Asic[03]=47.7470 Asic[04]=47.9990 Asic[05]=49.5430 Asic[06]=47.8820 Asic[07]=49.7940 Asic[08]=49.2410
Asic[09]=48.9890 Asic[10]=48.5700 Asic[11]=48.7040 Asic[12]=48.9050 Asic[13]=48.6370 Asic[14]=47.9990 Asic[15]=48.3850 Asic[16]=47.6300
Asic[17]=48.2340 Asic[18]=47.9660 Asic[19]=48.3680 Asic[20]=49.1900 Asic[21]=49.8450 Asic[22]=46.9590 Asic[23]=48.7540 Asic[24]=833.055
Asic[25]=48.9050 Asic[26]=49.3250 Asic[27]=49.2240 Asic[28]=48.6370 Asic[29]=53.8540 Asic[30]=49.6430 Asic[31]=46.4390 Asic[32]=48.4190
Asic[33]=46.6570 Asic[34]=47.7470 Asic[35]=48.4350 Asic[36]=48.5190 Asic[37]=49.6600 Asic[38]=49.3250 Asic[39]=48.3180 Asic[40]=48.3680
Asic[41]=47.5460 Asic[42]=49.3250 Asic[43]=47.8150 Asic[44]=98.9010 Asic[45]=49.6940 Asic[46]=49.0730 Asic[47]=48.6870 Asic[48]=46.1700
Asic[49]=46.5560 Asic[50]=47.5460 Asic[51]=48.0660 Asic[52]=49.3410 Asic[53]=48.9390 Asic[54]=49.0730 Asic[55]=48.3680 Asic[56]=49.5430
Asic[57]=52.3610 Asic[58]=578.897 Asic[59]=48.8210 Asic[60]=48.6700 Asic[61]=213.204 Asic[62]=47.0260 Asic[63]=49.1230
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=47.3110 Asic[02]=44.8450 Asic[03]=45.2310 Asic[04]=45.0970 Asic[05]=46.4390 Asic[06]=44.9620 Asic[07]=46.8250 Asic[08]=46.2210
Asic[09]=46.2210 Asic[10]=45.5500 Asic[11]=45.8850 Asic[12]=46.3380 Asic[13]=45.3990 Asic[14]=45.4660 Asic[15]=45.4830 Asic[16]=44.8790
Asic[17]=45.6170 Asic[18]=45.2140 Asic[19]=45.7680 Asic[20]=46.5060 Asic[21]=46.8250 Asic[22]=44.4420 Asic[23]=45.8520 Asic[24]=781.415
Asic[25]=45.8180 Asic[26]=46.6400 Asic[27]=46.2380 Asic[28]=45.6670 Asic[29]=51.3380 Asic[30]=46.8750 Asic[31]=44.1070 Asic[32]=45.5660
Asic[33]=43.7880 Asic[34]=44.9960 Asic[35]=45.5500 Asic[36]=45.1810 Asic[37]=46.8750 Asic[38]=46.0360 Asic[39]=44.9960 Asic[40]=45.5830
Asic[41]=44.7950 Asic[42]=46.7240 Asic[43]=45.6000 Asic[44]=92.9280 Asic[45]=46.7580 Asic[46]=46.4390 Asic[47]=46.4390 Asic[48]=38.9900
Asic[49]=44.2240 Asic[50]=272.914 Asic[51]=45.8680 Asic[52]=46.6570 Asic[53]=46.1700 Asic[54]=46.5390 Asic[55]=45.9190 Asic[56]=46.4390
Asic[57]=50.1970 Asic[58]=543.229 Asic[59]=46.0700 Asic[60]=46.0530 Asic[61]=200.521 Asic[62]=44.9620 Asic[63]=46.7410
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[24]=947.812000
Asic[44]=112.558000
Asic[58]=658.673000
Asic[61]=242.598000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[24]=833.055000
Asic[58]=578.897000
Asic[61]=213.204000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[24]=781.415000
Asic[50]=272.914000
Asic[58]=543.229000
Asic[61]=200.521000
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=28
Chain[5] Chip[62] local Temp=57
Chain[5] Chip[62] middle Temp=72
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=26
Chain[6] Chip[62] local Temp=54
Chain[6] Chip[62] middle Temp=63
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=25
Chain[7] Chip[62] local Temp=54
Chain[7] Chip[62] middle Temp=67
Done read temp on Chain[7]
set FAN speed according to: temp_highest=57 temp_top1[PWM_T]=57 temp_top1[TEMP_POS_LOCAL]=57 temp_change=0 fix_fan_steps=0
FAN PWM: 64
read_temp_func Done!
CRC error counter=0
|
