1 GPU gtx 1070 miner freezing windows on power 100%

[projjal]

Help Guys,

My system configuration is

Asrock H110 Pro BTC+
Processore- intel 7 gen core i5 7400
Ram - 4 gb DDR4 2400 bus
PSU- Cooler Master V 1200 Platinum
GPU- Zotac 1070 amp extream. *1
Operating System- Windows 10 pro 64 bit

Though I have only one GPU thats why I installed it on directly to the PCI slot to the mother board. I used the minregate v.7.2 version to mine, if I mine with 85% power then every thing all right. I could get 25.33 to 26.86 MH/s on ETH & the system runs completely ok. I used the Firestorm software to control the gpu powers. But when I increase the cpu power to 100% then with in 1 min the System goes offline, then there is no display, though the input of the display is from the HDMI port of this GPU coz there is no display output from the motherboard. after 2/3 min the system comes online then I find out there is no GPU in the system. If I power off all the system then I can get the GPU. Help me to find out this issue. I installed the latest version of Cuda Driver, & All the driver has been updated. All the driver also updated. Please help me out to get rid of the system

[Lancedor]

I solved this problem by downgrade a bios, i don't like ZOTAC products for such bugs, try dude
https://github.com/yalu1O2/Zotac/raw/ROMs/Zotac.GTX1070.8192.161005.zip

[ivakar]

It looks like that once you set your PL to 100% your overclock settings is to hursh to your card and that is why it just crushes the driver and it shutdown the card. so lower the overclock settings and try again?