V2 asic blade's Backplanes
The HP DPS 800GBA or ATSN 7001044-Y000 psu are too noisy, quite custom desktop PC PSU can be used but im wondering can the psu be connected to the backplane instead of individual blades?
where the psu plugs in if you look on left and right there is those inserts..
Left side is 12v+ and other is ground..
so does this mean you connect 12v+ wires on left and ground wire on the right side?
Would a 1000watt quite pc psu be enough power to power all 10 blades?