[Resolved]Setup cgminer daemon on Pogoplug E02 USB ASIC ALARM

I'm trying to configure cgminer to run as service/daemon on ArchLinuxARM on my Pogoplug E02 with ASIC Block Erupters attached to it.
I just built the OS from the lastest release on 9/25/13. I followed the tutorial from Qui's techNOLOGY Blog. It was easy to follow and was written after the initd and systemd changes. All the other tuts I used were written prior to those changes and created many headaches.

Every guide I have seem is close, but not quite.
Ex: [Seach cgminer] [^^^^]
   [Seach cgminer]+[ASIC Block erupter] [^^^]
   [Seach cgminer]+[ASIC Block erupter]+Linux [^]
   [Seach cgminer]+[ASIC Block erupter]+Linux+Pogoplug []

In my first attempt, I followed two guides,
Project: CGMiner 3.4.0 with USB Block Erupters on a 5W pogoplug mobilehttps://bitcointalk.org/index.php?topic=285028.0 and
Tutorials:Raspberry Pi Mining with Arch Linuxhttps://forums.butterflylabs.com/showwiki.php?title=Tutorials:Raspberry+Pi+Mining+with+Arch+Linux which made it confusing.

I have setup the following configuration with three files:
[root@pogoplug01 cgminer-3.4.3]# cat /home/Bitcoin/cgminer/cgminer-3.4.3/cgminer.conf

Code:

{
"pools" : [
        {
                 "url" : "http://pool-us.50btc.com:8332",
                "user" : "xxx@xxx.com_xxx",
                "pass" : "xxxxxxxxxxxxxxxxx"
        }
]
,
       "api-listen" : true,
       "api-port" : "4028",
       "expiry" : "120",
       "failover-only" : true,
       "log" : "5",
       "no-pool-disable" : true,
       "queue" : "2",
       "scan-time" : "60",
       "worktime" : true,
       "shares" : "0",
       "kernel-path" : "/usr/local/bin",
       "api-allow" : "0/0",
       "icarus-options" : "115200:1:1",
       "icarus-timing" : "3.0=100"
}

[root@pogoplug01 Bitcoin]# cat /etc/startscript.sh

Code:

#!/bin/sh
# sleep 1m ### This is one difference between the two guides ###
screen -dmS cgminer /home/Bitcoin/cgminer-3.4.3/cgminer --config /home/Bitcoin/cgminer-3.4.3/cgminer.conf 2> /var/log/cgminer.log
# sleep 100000d ### This is one difference between the two guides ###

[root@pogoplug01 Bitcoin]# cat /usr/lib/systemd/system/cgminer.service

Code:

[Unit]
Description=Start cgminer
Documentation=man:syslog-ng(8)

[Service]
User=root
Type=oneshot
ExecStart=/bin/sh /etc/startscript.sh
StandardOutput=null

[Install]
WantedBy=multi-user.target
# Enable the service: ### This is one difference between the two guides ###
### I commented this out because I didn't think it was valid code! ###

[root@pogoplug01 Bitcoin]#

Then changed permissions for the script:
[root@pogoplug01 Bitcoin]# chmod +x /usr/lib/systemd/system/cgminer.service

Once everything was configured, I shutdown the ssh session which was running cgminer interactively and started the daemon:
[root@pogoplug01 Bitcoin]# systemctl start cgminer~~.service~~

[root@pogoplug01 Bitcoin]# systemctl enable cgminer #This will start the cgminer.service on startup.

Then I tried to restore the screen session with:
[root@pogoplug01 Bitcoin]# screen -r
error:No screen to restore -- Not sure of the exact wording here.

So I looked to see if it logged anything:
[root@pogoplug01 Bitcoin]# cat /var/log/cgminer.log
[root@pogoplug01 Bitcoin]#

Is there a debug version so I can trace my path?

Oh, yes I did post this in the ALARM forum. But it seems the ratio of activity between BT and ALARM is 1000+?/1.
I'm aware this is an immortal sin in the Forum worlds. But I just want to mine too people!

Some please point me in the right direction...
Thanks.