Claymore Can't find 3/6 GPUs, please help (ETH)

[jjgss]

As the title says, 3/6 of my GPUs cannot be detected by the Claymore miner, and when going into device manager I find the error "This device cannot find enough free resources that it can use. (Code 12)" on those three GPUs. Any suggestions as to what I should do to fix it?

Specs:
GPU: 6*Sapphire Nitro+ Radeon RX 580
Mobo: MSI H270-A PRO
Processor: Intel Pentium 3.3 GHz
SSD: Samsung 250 gb 850 evo
PSU: Thermaltake PSU 1500w 80+titanium

I appreciate any help I can get!

[Ruster87]

Have you enable above 4g decoding? set pcie gen to 1? disable hd audio.

[jjgss]

There is no setting in the Bios to enable above 4g decoding? Same for the PCI lanes.  I turned off HD audio and that didn't do anything.

[jjgss]

Hey sorry I'm a dumbass. I found the settings and enabling 4g decoding worked for me. Thank you so much.

[chandrarahmadewa]

As the title says, 3/6 of my GPUs cannot be detected by the Claymore miner, and when going into device manager I find the error "This device cannot find enough free resources that it can use. (Code 12)" on those three GPUs. Any suggestions as to what I should do to fix it?

Specs:
GPU: 6*Sapphire Nitro+ Radeon RX 580
Mobo: MSI H270-A PRO
Processor: Intel Pentium 3.3 GHz
SSD: Samsung 250 gb 850 evo
PSU: Thermaltake PSU 1500w 80+titanium

I appreciate any help I can get!

try to enter bios mode, is there any settings for mining mode,
I'm having a problem when the graphics card (GPU) is not detected in device manager to set "Biostar tb250-BTC pro", I have to enter bios and change it to mining mode for 6 GPU.

[Geraldo]

Set PCIe to Gen 1 or Gen 2, and set Top Of Lower Usable Dram (TOLUD) to 3.5G, it would be under PCIe setting in your mobo's bios. Also, don't forget to enable 4g decoding.

Edit: Seems has fixed, above. 

[mini miner]

here u can find 4G decoding setting in bios


https://www.techpowerup.com/img/GvF4ztnF1SFZSHpy.jpg