Hi all,
I compiled cgminer for openwrt to support USB antminer and block erupter. Both can be download here. You can use the firmware on our smart router GL.iNet or on TP-link 720n, 703n etc.
The cgminer works with Block Erupter perfectly with hot plug and play support.
While for Antminer, there is a bug, when start cgminer as daemon or hot plug scripts, it will take 100% cpu. So better to start in terminal or reboot the devices, which will not have the issues. The source code is here:
https://github.com/alzhao/openwrt-cgminer-antminer, hope someone can find the bug.
To use antminer, check this instruction:
http://www.gl-inet.com/w/?p=336&lang=enYou can also flash the firmware provide from
https://github.com/AntMiner/AntGen1/tree/master/firmware to GL.iNet smart router easily using the uboot web interface. But I cannot get it work with the USB ant miner.
I didn't test multiple devices with usb hub, as I only have one block erupter and one usb ant miner.
http://www.gl-inet.com/w/wp-content/uploads/2014/01/Screenshot-from-2014-01-16-203052.png http://www.gl-inet.com/w/wp-content/uploads/2014/01/0116_1.jpghttp://www.gl-inet.com/w/wp-content/uploads/2014/01/0116_2.jpghttp://www.gl-inet.com/w/wp-content/uploads/2014/01/manual_cgminer.png
