Baikal N70 setup appreciated.

[bukz]

Hey guys, I've gotten a new power supply for my N70, It's a corsair 500. After plugging in the adapters to the two pcie coords when I turn on the miner nothing happens. I think this is because I need to short the green wire that tells the PSU it's plugged in and connect that to a black wire so it is allowed to fire up? Thanks for your guidance!

https://i.imgur.com/xsXg5YG.jpg

[bukz]

Shorted the power button wire with a piece of a mouse trap, didn't have a paper clip laying around. Found it on the network with advanced IP scanner but can't seem to get the IP to load. It's deemed unresponsive when I try to ping it.

https://i.imgur.com/GSfmvWB.jpg

[BitMaxz]

Shorted the power button wire with a piece of a mouse trap, didn't have a paper clip laying around. Found it on the network with advanced IP scanner but can't seem to get the IP to load. It's deemed unresponsive when I try to ping it.

https://i.imgur.com/GSfmvWB.jpg

Try to replace the Ethernet cable and make sure the ethernet socket is clean and the cable is fixed then restart the unit after that scan the IP again then access the dashboard via browser, make sure that you are accessing the correct IP because if you are accessing the wrong IP it takes too long to load and it won't work.