Antminer S15 Power Supply trouble

[ShtechCr]

Hello there, if anyone can help it would be really appreciated, i purchased a s15 and the power supply went bad on it. I sent the psu back to bitmain and now dhl sent to wrong address, make a long and stressfull story short I wanted to know if I could run the S15 miner with a normal bitmain power supply apw3++. My provider in china says its possible but doesnt know how to, can anyone help ? Thankyou very much

[vincl]

not possible, voltage diferent

[sarcheer]

The miner and the integrated PSU have a communication line between them to fine tune supplied voltage that it would not be able to do with the APW3.

[philipma1957]

@ op you are pretty much fucked.

you must have this unit to run your gear.

https://shop.bitmain.com/product/detail?pid=00020190418172319945PvKR86Kg0685

and it is sold out.

so you are pretty much fucked.

I would post  at bitmain twitter over and over and over to ask for a new psu.

try to embarrass them to getting one for you.

[mikeywith]

Short answer is NO.

You have to get the exact PSU to be on the safe side, you probably have more than 240v or less than 200v coming from the outlet, anything which is not in the range of 200v to 240v will most likely burn these PSUs.

So before wasting more time and money on another PSU you must check the voltage you have, if you can't fix it then stick to S9 or ditch bitmain.