I have some Cubietruck ARMv7 boards to sell and i would like to offer them here for Bitcoin or Monero
![Cool](https://bitcointalk.org/Smileys/default/cool.gif)
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fwww.cubietech.com%2Fwp-content%2Fuploads%2Fcubietruck-metal%2Fcubietruck-metal5.jpg&t=665&c=bfriYQfT9mdsiw)
I am sure some members here will find these little „trucks“ very exciting as they have power enough for being a public server, a full blown hosting solution and even a crypto node.
I am running my own Monero node on one of these and this works really smooth! What i offer here in each set:—————————-----------
• Cubietruck mainboard with 2GB Ram
• The original black metal case
• (SSD‘s are all gone but can be bought cheap on ebay, aliexpress,...)
• Li-battery to avoid crashes from energy breaks
• The original set of cables for FEL power, standart power and the SATA connection
• The original WLAN dongle
• A fitting network adapter
• (on special request i can setup an SD card with your prefered OS- Armbian and Freedombox are recommendet) =10€ extra
Each Cubietruck board for 40€/44$/36£ in Bitcoin or Monero!The boards have been in use for some time but are working fine.
Tracked and insured shipping inside the European Union is 11€.
For shipping outside the EU we need to talk about the price, depending on destination.
Escrow is welcome!————-
Some more infos copied from cubietech:more here:
http://cubieboard.org/tag/cubietruck/Cubietruck is the 3rd board of Cubieteam, so we also name it Cubieboard3. It's a new PCB model adopted with Allwinner A20 main chip,just like Cubieboard2. But it is enhanced with some features, such as 2GB memory, VGA display interface on-board, 1000M nic, WIFI+BT on-board, support Li-battery and RTC,SPDIF audio interface.
• Hardware Specs
AllWinnerTech SOC A20 ARM® Cortex™-A7 Dual-Core ARM® Mali400 MP2 Complies with OpenGL ES 2.0/1.1
1GB/2GB DDR3@480MHz
HDMI&VGA 1080P display output on-board
10M/100M/1G Ethernet
Wifi+BT wireless connection with antenna on-board
SATA 2.0 interface support 2.5’ HDD (for 3.5’ HDD, only need another 12V power input)
Storage solution NAND+MicroSD or TSD+ MicroSD or 2*MicroSD
2 x USB HOST 1 x OTG 1 x SPDIF 1 x IR 4 x LEDs 1 Headphone 3 x Keys
Power DC5V @ 2.5A with HDD support Li-battery & RTC
54 extended pins including I2S, I2C, SPI, CVBS, LRADC x2,UART, PS2, PWMx2, TS/CSI, IRDA, LINEIN&FMIN, TVINx4 with 2.0 pitch connectors
PCB size 11cm *8cm*1.4mm very suitable for installing a 2.5’ HD