HELP -BMminer Version and Harware Version not found? Ebay purchase??

[BBitcoin92]

Hi All

Just purchased a miner of Ebay secondhand and plugged in to test its on old FW

Miner Type   Antminer S9
Hostname   antMiner
Model   GNU/Linux
Hardware Version   
Kernel Version   Linux 3.14.0-xilinx-g16220c3 #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
File System Version   Fri May 31 10:59:27 CST 2019
Logic Version   V1.3.22
BMminer Version   
Uptime   9
Load Average   0.30, 0.30, 0.14

Been running for over 40 mins and done one reboot, tried flashing with older Bitmain FW , fixed and auto frew, will not as its SSH locked.

I don't want to install BrainsOS yet as i may have it to return and have yet to find a way to downgrade from it (could i generate a backup and restore from there after flashing Brains via  NAND/SD?)

Kernel log below-

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:

• 0
• 1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884108K/1032192K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 148084K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000291] ps7-ttc #0 at f0006000, irq=43
[    0.000592] Console: colour dummy device 80x30
[    0.000628] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040196] pid_max: default: 32768 minimum: 301
[    0.040409] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.040430] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.042571] CPU: Testing write buffer coherency: ok
[    0.042895] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042952] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.043171] L310 cache controller enabled
[    0.043190] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120988] CPU1: Booted secondary processor
[    0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210347] Brought up 2 CPUs
[    0.210365] SMP: Total of 2 processors activated.
[    0.210373] CPU: All CPU(s) started in SVC mode.
[    0.211040] devtmpfs: initialized
[    0.213465] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214652] regulator-dummy: no parameters
[    0.221513] NET: Registered protocol family 16
[    0.223781] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226035] cpuidle: using governor ladder
[    0.226048] cpuidle: using governor menu
[    0.233386] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.234892] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.234905] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235009] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.256605] bio: create slab <bio-0> at 0
[    0.257992] vgaarb: loaded
[    0.258695] SCSI subsystem initialized
[    0.259581] usbcore: registered new interface driver usbfs
[    0.259756] usbcore: registered new interface driver hub
[    0.259986] usbcore: registered new device driver usb
[    0.260661] media: Linux media interface: v0.10
[    0.260816] Linux video capture interface: v2.00
[    0.261205] pps_core: LinuxPPS API ver. 1 registered
[    0.261217] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.261345] PTP clock support registered
[    0.261701] EDAC MC: Ver: 3.0.0
[    0.262877] Advanced Linux Sound Architecture Driver Initialized.
[    0.265594] DMA-API: preallocated 4096 debug entries
[    0.265607] DMA-API: debugging enabled by kernel config
[    0.265682] Switched to clocksource arm_global_timer
[    0.286667] NET: Registered protocol family 2
[    0.287307] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.287402] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.287561] TCP: Hash tables configured (established 8192 bind 8192)
[    0.287627] TCP: reno registered
[    0.287645] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.287695] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.287949] NET: Registered protocol family 1
[    0.288290] RPC: Registered named UNIX socket transport module.
[    0.288302] RPC: Registered udp transport module.
[    0.288311] RPC: Registered tcp transport module.
[    0.288319] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288332] PCI: CLS 0 bytes, default 64
[    0.288755] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290734] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292113] bounce pool size: 64 pages
[    0.292980] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293180] msgmni has been set to 1486
[    0.293938] io scheduler noop registered
[    0.293951] io scheduler deadline registered
[    0.293988] io scheduler cfq registered (default)
[    0.304955] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.304974] dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.427362] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.999121] console [ttyPS0] enabled
[    1.003376] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.011002] [drm] Initialized drm 1.1.0 20060810
[    1.028016] brd: module loaded
[    1.037389] loop: module loaded
[    1.046993] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.052747] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.060848] libphy: XEMACPS mii bus: probed
[    1.065221] ------------- phy_id = 0x3625e62
[    1.070118] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.078729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.085339] ehci-pci: EHCI PCI platform driver
[    1.092567] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.099397] usbcore: registered new interface driver usb-storage
[    1.106261] mousedev: PS/2 mouse device common for all mice
[    1.112341] i2c /dev entries driver
[    1.119270] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.124748] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.130661] Xilinx Zynq CpuIdle Driver started
[    1.135498] sdhci: Secure Digital Host Controller Interface driver
[    1.141623] sdhci: Copyright(c) Pierre Ossman
[    1.146032] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.152763] mmc0: no vqmmc regulator found
[    1.156810] mmc0: no vmmc regulator found
[    1.195706] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.204393] usbcore: registered new interface driver usbhid
[    1.209908] usbhid: USB HID core driver
[    1.214613] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.220909] nand: Micron MT29F2G08ABAEAWP
[    1.224875] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.230814] Bad block table found at page 131008, version 0x01
[    1.237035] Bad block table found at page 130944, version 0x01
[    1.243007] nand_read_bbt: bad block at 0x000000140000
[    1.248165] 3 ofpart partitions found on MTD device pl353-nand
[    1.253916] Creating 3 MTD partitions on "pl353-nand":
[    1.259066] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.267097] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.274389] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.285114] TCP: cubic registered
[    1.288380] NET: Registered protocol family 17
[    1.293019] Registering SWP/SWPB emulation handler
[    1.298906] regulator-dummy: disabling
[    1.303173] UBI: attaching mtd1 to ubi0
[    1.829407] UBI: scanning is finished
[    1.840979] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.848055] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.854798] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.861502] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.868359] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.874328] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.881459] UBI: max/mean erase counter: 26/13, WL threshold: 4096, image sequence number: 267830735
[    1.890577] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.899792] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.899797] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.903698] ALSA device list:
[    1.903701]   No soundcards found.
[    1.920069] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.988499] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.994426] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.003568] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.013443] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.018517] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 68024B66-D002-4EAC-85B6-9A9AE3C1123E, small LPT model
[    2.030003] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.037201] devtmpfs: mounted
[    2.040309] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.884574] random: dd urandom read with 1 bits of entropy available
[    3.275721]
[    3.275721] bcm54xx_config_init
[    4.365729]
[    4.365729] bcm54xx_config_init
[    7.366556] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.372641] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   19.892852] In axi fpga driver!
[   19.895946] request_mem_region OK!
[   19.899314] AXI fpga dev virtual address is 0xf0200000
[   19.904418] *base_vir_addr = 0xc51e
[   19.919141] In fpga mem driver!
[   19.922430] request_mem_region OK!
[   19.926042] fpga mem virtual address is 0xf3000000
[   20.705009]
[   20.705009] bcm54xx_config_init
[   21.794883]
[   21.794883] bcm54xx_config_init
[   24.795410] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   24.801431] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  438.144645] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram:       1039753216
Detect 1GB control board of XILINX
mmap axi_fpga_addr = 0xb6efe000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5cf7000
forceFreq=-1 forceFlag=0
min work minertest[0]:912


DETECT HW version=0000c51e
miner ID : 81749ccc6880881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[15] has core num=1
Chain[5] ASIC[22] has core num=1
Chain[5] ASIC[29] has core num=4
Chain[5] ASIC[35] has core num=2
Chain[5] ASIC[62] has core num=1
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[15] has core num=4
Chain[6] ASIC[16] has core num=1
Chain[6] ASIC[41] has core num=1
Chain[6] ASIC[48] has core num=2
Chain[6] ASIC[54] has core num=1
Chain[6] ASIC[56] has core num=5
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[16] has core num=15
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,-3,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-5,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1831 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=29907 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=25927 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=19821 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri May 31 10:59:27 CST 2019 type: Antminer S9
miner ID : 81749ccc6880881c
Checking fans...
get fan[4] speed=4560
get fan[5] speed=5760
get fan[4] speed=4560
get fan[5] speed=5760
get fan[4] speed=4560
get fan[5] speed=5760
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0f 0x47 0x0d 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0f 0x48 0x0b 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x01 0x48 0x01 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J6] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=890
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J7] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=890
Chain[J8] orignal chain_voltage_pic=91 value=890
Chain[J8] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=890
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[15] has core num=1
Chain[J6] ASIC[22] has core num=1
Chain[J6] ASIC[29] has core num=4
Chain[J6] ASIC[35] has core num=2
Chain[J6] ASIC[62] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[15] has core num=4
Chain[J7] ASIC[16] has core num=1
Chain[J7] ASIC[41] has core num=1
Chain[J7] ASIC[48] has core num=2
Chain[J7] ASIC[54] has core num=1
Chain[J7] ASIC[56] has core num=5
Chain[J8] has core num in PIC
Chain[J8] ASIC[16] has core num=15
miner total rate=13551GH/s ideal_total_hash_rate = 13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-3
Chain:6 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637


Miner fix freq ...
totalRate = 13551, fixed_totalRate = 13635
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-3
Chain:6 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637

max freq = 637
totalRate = 13551, fixed_totalRate = 13500
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:43 remote:46 offset:28
Chain[J6] chip[244] get middle temp offset=28 typeID=55
Chain[J7] PIC temp offset: 62,-3,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
Chain[J7] chip[244] use PIC middle temp offset=-3 typeID=55
New offset Chain[7] chip[244] local:38 remote:39 offset:30
Chain[J7] chip[244] get middle temp offset=30 typeID=55
Chain[J8] PIC temp offset: 62,-5,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
Chain[J8] chip[244] use PIC middle temp offset=-5 typeID=55
New offset Chain[8] chip[244] local:38 remote:41 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
single board rate=4526 voltage limit=940 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 940
single board rate=4523 voltage limit=940 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 940
single board rate=4502 voltage limit=940 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 940
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
start thread for read temp
setStartTimePoint total_tv_start_sys=810 total_tv_end_sys=811
restartNum = 2 , auto-reinit enabled...
bring_up_pcb_temp = 51
setting to working voltage...
voltage_check_done
avg hash rate = 0.000000, ideal hash rate = 13500
hash rate is low...
Fatal Error: network connection lost!
max pcb temperature:67, fan num:2, error counter:1
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=0.00000 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=0.00000 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=0.00000 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=67
Chain[5] Chip[62] junction temperature=78
Special fix Chain[5] Chip[62] middle Temp = 82
Done read temp on Chain[5]
Chain[6] Chip[62] junction temperature=77
Special fix Chain[6] Chip[62] middle Temp = 77
Done read temp on Chain[6]
Chain[7] Chip[244] pcb temperature=62
Chain[7] Chip[62] junction temperature=73
Special fix Chain[7] Chip[62] middle Temp = 77
Done read temp on Chain[7]
Max pcb temp : 67
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0

Cheers

EDIT

I should also add red leds on all 3 boards, constant red led onfront/status led, cards are warm/its blowing warm air and fans are fine and speeds are altering slightly?

[BitMaxz]

Where or what pool do you mine? Check carefully if you pasted it with extra spaces or letters because the miner will not work properly if the Url has extra spaces or extra letters.

Another thing is your internet may be very slow and unstable plus the pool server you use has a high ping.

Why not test it with BraiinsOS? If your concern is you don't know to put it back to stock firmware why not just boot the miner with an SD card instead of flashing it directly to the nand?

[BBitcoin92]

Where or what pool do you mine? Check carefully if you pasted it with extra spaces or letters because the miner will not work properly if the Url has extra spaces or extra letters.

Another thing is your internet may be very slow and unstable plus the pool server you use has a high ping.

Why not test it with BraiinsOS? If your concern is you don't know to put it back to stock firmware why not just boot the miner with an SD card instead of flashing it directly to the nand?

Brainspool as with all my other miners, all pool details are correct,

I have messaged seller and he has stated to try hard reset, then upgrade.

Also i'll download the file and try the run from SD card.

Cheers



UPDATE 1 -I changed the pool details from older slushpool to newer brainspool and it's working?

When i entered the original details i just copy/pasted from a miner already running on older slushpool urls?



UPDATE 2 -To run from SD card i presume you still need to move jumper 4?

Can someone confirm this please.

Thanks

I always copy from the same miner out of habit....Very Odd

Also where are the details to downgrade from Brains to the older Bitmain FW i have 500, 550, 600, 650 fixed plus variable FW that i used to use and i find some boards will only run on older FW?

I can't find the downgrade guide, i presumed flashing BrainsOS would remove the SSH lock and allow you to flash anything?

Cheers

[BitMaxz]

Why don't you just go check and read the braiins documentation about reverting or flashing it back to factory firmware?

Check this link https://docs.braiins.com/os/20.03/open-source-en/Setup/2_upgrade_downgrade_uninstall.html#flashing-a-factory-firmware


about JP4 if you just want to boot it to braiins without flashing it then you need to download the right firmware there are two options to download, the one is "auto-install to nand" and "Run from SD card" download the "Run from SD card" and paste the contents to SD. And then if you want to boot it don't forget to move the JP4 it is the same as how you flashed the unit before but this time if you move the JP4 to the original position then the miner will boot to the original firmware.

[BBitcoin92]

Why don't you just go check and read the braiins documentation about reverting or flashing it back to factory firmware?

Check this link https://docs.braiins.com/os/20.03/open-source-en/Setup/2_upgrade_downgrade_uninstall.html#flashing-a-factory-firmware


about JP4 if you just want to boot it to braiins without flashing it then you need to download the right firmware there are two options to download, the one is "auto-install to nand" and "Run from SD card" download the "Run from SD card" and paste the contents to SD. And then if you want to boot it don't forget to move the JP4 it is the same as how you flashed the unit before but this time if you move the JP4 to the original position then the miner will boot to the original firmware.

Thanks, that's the link i was looking for, i could not find it. I fully understand the process to upgrade via SD card and run from SD card now, plus you have to flash the image not paste to the SD.

Even after reading it i'm totally confused as it uses uses command lines etc and SSH? I was hoping to find an explanation for this tbh as once i have done it once i presume i will understand and find it relatively easy  and i can help others like you.

Even afetr reading how to 'downgrade' and have the old 'Community Edition' FW that i thimnk they now label it i do not understand how to flash it..

Thanks for replying and being undertanding, i'm getting there slowly, the tjought of installing BrainsOS seemed complicated at first now i find it simple.

Hopefully i can do the same to downgrade and understand how to use these commands and flash back older 'community fw' i have.....

[Artemis3]

You don't need to "install" Braiins OS to try it, just run directly from SD, no need to touch NAND ever.

You should go with Braiins OS+ which is very simple, you really only need to set up the pool and set a lower power limit value (such as 1280W).

With manual values you can easily damage your machine if you are not careful. Defaults should work but for testing you should at least lower the speeds (defaults to 650Mhz). Remember that there is no support with the community edition, you are on your own.

Considering you are using Braiins Pool you should go with Braiins OS+, since the 2% pool fee is returned to you when you use Braiins OS+ with it.

This won't happen with the Community edition or other firmware, you have to pay the pool fee, in essence you are paying the same without the efficiency gain if you don't use Braiins OS+ so it makes no sense not to use it.


Again, to test Braiins OS+:

Flash the sd card in a PC
Move jp4 and insert card
Use it with a web browser

Of course the hashboards may have some issue. If you use Braiins OS+ you can send a ticket and attach the support (From Quick Actions > Get Help > Download) file for inspection.